1/204ページ
カタログの表紙
カタログの表紙

このカタログをダウンロードして
すべてを見る

ダウンロード(13.5Mb)

unipole & multipole connectors 2C・2Gシリーズ

製品カタログ

This catalogue gives the complete description of LEMO unipole and multipole type connectors

※技術特性につきましては、「技術カタログ 単極・多極コネクタ」をご覧ください。
※レモコネクタはモジュール方式のため、共通部品を組み合せることにより様々なコネクタに変えることができます。このため、カタログに掲載されている写真や図は、色、形状などが実物とは微妙に異なっている場合や、写真撮影の方向が一定していない場合がございます。ご注意いただきますようお願いいたします。

このカタログについて

ドキュメント名 unipole & multipole connectors 2C・2Gシリーズ
ドキュメント種別 製品カタログ
ファイルサイズ 13.5Mb
取り扱い企業 レモジャパン株式会社 (この企業の取り扱いカタログ一覧)

この企業の関連カタログ

この企業の関連カタログの表紙
医療用向けコネクタ
製品カタログ

レモジャパン株式会社

この企業の関連カタログの表紙
ロボット向けコネクタ
製品カタログ

レモジャパン株式会社

この企業の関連カタログの表紙
半導体製造装置向けコネクタ
製品カタログ

レモジャパン株式会社

このカタログの内容

Page1

Cover

unipole & multipole connectors
Page2

No reproduction or use without express permission of editorial or pictorial content, in any manner. LEMO reserve the right at all times to modify and improve specifications without any notification.
Page3

LEMO unipole and multipole connectors、Table of Contents

® ® LEMO unipole and multipole connectors This catalogue gives the complete description of LEMO unipole and multipole type connectors. The LEMO manufacturing programme has been extended to almost 40 series divided into 7 product families with specific mating and environmental characteristics. Each series includes a wide variety of plug, socket, coupler and bridge plug models, available in contact configurations adapted to all round cables, including up to 114 conductors, and a maximum diameter of 30 mm. Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electro- magnetic compatibility (EMC) is important. Table of Contents 3 steps to select the right connector ................................................................................................................................................................................3 B Series (indoor, keyed) Part Numbering system .........................................................................................................................................................................................13 Metal Housing models............................................................................................................................................................................................14 Elbow socket models..............................................................................................................................................................................................25 Plastic housing models...........................................................................................................................................................................................28 Watertight or vacuumtight models..........................................................................................................................................................................30 Bridge models ........................................................................................................................................................................................................34 Threaded-latching models......................................................................................................................................................................................35 Alignment Key and Polarized Keying System ........................................................................................................................................................36 K Series (outdoor, keyed) Part Numbering system..........................................................................................................................................................................................38 Metal Housing models............................................................................................................................................................................................39 Watertight or vacuumtight models..........................................................................................................................................................................47 Alignment Key and Polarized Keying System ........................................................................................................................................................49 T Series (outdoor, keyed) Part Numbering system..........................................................................................................................................................................................52 Metal Housing models............................................................................................................................................................................................53 Watertight or vacuumtight models..........................................................................................................................................................................55 Plastic housing models, alignment Key and Polarized Keying System..................................................................................................................56 B, K and T Series Insert configuration, Housings, Insulators, Contacts, Collets, Variant .....................................................................................57 S Series (indoor, stepped insert) Part Numbering system .........................................................................................................................................................................................75 Metal Housing models............................................................................................................................................................................................76 Elbow socket models..............................................................................................................................................................................................87 Plastic housing models...........................................................................................................................................................................................89 Watertight or vacuumtight models..........................................................................................................................................................................91 E Series (outdoor, stepped insert) Part Numbering system..........................................................................................................................................................................................94 Metal Housing models............................................................................................................................................................................................95 Watertight or vacuumtight models........................................................................................................................................................................101 S, and E Series Insert configuration, Housings, Insulators, Contacts, Collets, Variant.......................................................................................103 M Series (outdoor, keyed) ..............................................................................................................................................................................................123 F Series (outdoor, keyed) ...............................................................................................................................................................................................125 Spare parts ......................................................................................................................................................................................................................127 Accessories .....................................................................................................................................................................................................................137 Tooling .............................................................................................................................................................................................................................151 Panel cut-outs and PCB drilling pattern .......................................................................................................................................................................157 Cable assembly (B, K, T, S and E series) .......................................................................................................................................................................169 Technical characteristics ...............................................................................................................................................................................................182 www.lemo.com 1
Page4

® ® Precision modular connectors to suit your application Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. Over 75000 connectors The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 114 contacts. This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommuni- cations and military. LEMO’s Push-Pull Self-Latching Connection System This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute security against vibration, shock or pull on the cable, and facilitates operation in a very limited space. The LEMO self-latching system allows the connector to be mated by simply pushing the plug axially into the socket. Once firmly latched, connection cannot be broken by pulling on the cable or any other component part other than the outer release sleeve. When required, the connector is disengaged by a single axial pull on the outer release sleeve. This first disengages the latches and then withdraws the plug from the socket. UL Recognition LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO connector, cable and your equipment) will be easier because LEMO connectors are recognized. CE marking CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or several European safety directives. CE marking applies to complete products or equipment, but not to electrome- chanical components, such as connectors. RoHS LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parlia- ment and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and electronic equipment marketed in Europe. 2 www.lemo.com
Page5

3 steps to select the right connector

® ® 3 steps to select the right connector l Step 1: Select connector series Select the appropriate LEMO connector series according to the environmental parameters that will affect your device or cable such as indoor, outdoor, temperature range, ingress protection of the mated connector and of your device. Use the table shown on page 4. Part number coding . . . B, K, T, S or E l Step 2: Select connector size Use the section (mm2) or the AWG of your cable wire to select the optimal contact diameter (values vary between solder, crimp or print contact), see page 8. Use this optimal contact diameter to determine the right connector size as well as the insert configuration, see page 6. Part number coding . . . 0, 1, 2, 3, 4, 5 or 6 l Step 3: Complete the part number Now that you know the series, as well as the insulator configuration, complete the part numbering system with the help of the following table. Part number coding . . . M o d e l S e r i e s Insertco n f i g u r a t i o n Hou m a s te i r n gia l I nm s a u t l e a r t i o a r l C o n t a c t C o ll e t V a r iant B Series (indoor, keyed) 14 14 57 64 64 64 67 71 K Series (outdoor, keyed) 39 39 57 64 64 64 68 71 T Series (outdoor, keyed) 53 53 57 64 64 64 70 71 S Series (indoor, stepped insert) 76 76 103 112 112 112 115 121 E Series (outdoor, stepped insert) 95 95 103 112 112 112 119 121 Note: Figures in the above table refer to the catalogue pages. www.lemo.com 3
Page6

Step 1: Select Connector Series

® ® Step 1: Select Connector Series LEMO unipole and multipole connectors The standard keyed Series (B, 00) The characteristic feature of these connector series is a keying system which allows higher contact density and prevents all errors in alignment. The various keying alternatives prevent unwanted cross mating of otherwise similar connectors. It is also possible to use crimp contacts to reduce cable assembly time. These connector series, include the 0B to 5B range as well as the 00 multipole, some vacuumtight models are also available. The watertight keyed Series (K, T) These series are watertight when mated and assembled to an appropriate cable. They include the 0K to 5K series and the TT to 3T series, available in the same types as the 0B to 5B series. The standard Series (S, 00) The characteristic feature of these connector series is the hermaphroditic insulator in the multipole version. They include principally the 0S to 6S series, as well as the 00 unipole series. The watertight Series (E) These series are watertight when mated and assembled to an appropriate cable. They include the 0E to 6E series and are available in the same types as the S series. Series 00 multipole K T 00 unipoleB S E Environment indoor outdoor or harsh environment indoor outdoor or harsh environment Ingress protection 1) IP50 IP66 to IP68 IP50 IP66 to IP68 Ingress protection 2) IP50 to IP68 IP66 to IP68 IP50 to IP68 IP66 to IP68vacuumtight vacuumtight vacuumtight vacuumtight Temperature range - 55 to 250°C - 55 to 200°C - 55 to 250°C - 55 to 200°C Latching Push-Pull self-latching Shell sizes 8 metal 7 metaland 4 plastic 6 metal 5 metal and 5 plastic 6 metal Insulator type Multipole Unipole or multipolehermaphroditic Contact type Solder, crimp or print Solder, crimp or print Features 13 keyways 9 keyways 4 keyways Stepped insert Page 11 to 36 37 to 50 51 to 56 73 to 92 93 to 102 Note: 1) Mated connector. See ingress protection code p. 5. 2) Your device. For selection of connectors for watertight and vacuumtight devices, see p. 5. 4 www.lemo.com
Page7

® ® Definition of Ingress Protection (IP code) IEC 60529 outlines an international classification system Example: IP 50 = IP 5 0 for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of for- IP letter code eign bodies (i.e. tools, dust, fingers) and moisture. This 1st digit classification system utilizes the letters «IP» (Ingress Pro- 2nd digit tection) followed by two digits. Degrees of protection - First digit Degrees of protection - Second digit The first digit of the IP code indicates the degree to which The second digit indicates the degree of protection of the persons are protected against contact with moving parts equipment inside the enclosure against the harmful entry and the degree that equipment is protected against solid of various forms of moisture (e.g. dripping, spraying, sub- foreign bodies intruding into an enclosure. mersion, etc.) C o d e First digit description C o d e Second digit description 0 No special protection 0 No special protection 1 Protection from a large part of the body such as handor from solid objects greater than 50 mm in diameter 1 Protection from vertically dripping water 2 Protection against objects not greater than 80 mm in lengthand 12 mm in diameter 2 Protection from dripping water when tilted up to 15° 3 Protection from entry by tools, wires, etc.,with a diameter or thickness greater than 2.5 mm 3 Protection from sprayed water 4 Protection from entry by solid objectswith a diameter or thickness greater than 1.0 mm 4 Protection from splashed water 5 Protection from the amount of dust that would interferewith the operation of the equipment 5 Protection from water projected from a nozzle 6 Dust-tight 6 Protection against heavy seas, or powerful jets of water 7 – 7 Protection against temporary immersion 8 – 8 Protection against complete continuous submersion in water Selection of connectors for watertight or vacuumtight devices LEMO B and S series are rated IP50 only when mated. LEMO E, K and T series are rated IP66 (and over) only when mated. If a device must be watertight or vacuumtight when the connectors are unmated, it is important to select a water- tight or vacuumtight socket. You can consider the following two situations: A) Figure 1 shows a typical outdoor device. To ensure this B) Figure 2 shows a device which is subjected to pressure device retains IP66 or above when connectors are difference such as a near vacuum or pressurized gas unmated, it is important to choose a watertight socket and must exhibit no leakage. To ensure the device from B, S, E, K or T series. maintains its sealing, the socket is additionally tested for helium leakage (according MIL 1344A). Fig. 1 your device Fig. 2 your device epoxy resin seal FGG plug K series FGG plug B series EGG socket K series HGG socket B series Check temperature range (see section on pages 30, 47, 55, 91 and 101). www.lemo.com 5
Page8

Step 2: Select Connector Size

® ® Step 2: Select Connector Size Select the right connector size and insert configuration To be able to select the right connector size (0 to 6), it is important to define the contact diameter (ø A). Find out the available contact diameter (ø A) of the LEMO connector depending on the number of contacts required and depending on the rating required (see pages 57 to 63 and 103 to 111). The following table shows the contact diameter (ø A). Series 1 113 1.3 1 116 1.6 1 120 2.0 1 130 3.0 3.0 1 140 4.0 4.0 4.0 1 160 6.0 6.0 1 112 12.0 2 302 0.5 0.9 1.3 2.0 3.0 6.0 0.9 1.3 1.6 2.0 4.0 6.0 3 303 0.5 0.9 1.3 1.6 2.0 0.7 0.9 1.3 2.0 3.0 6.0/4.0 6.0 4 304 0.5 0.7 0.9 1.3 2.0 3.0 4.0 0.7 0.9 1.3 2.0 3.0 4.0 8.0 5 305 0.35 0.7 0.9 1.3 1.6 0.9/0.7 1.3 2.0/1.3 3.0/2.0 4.0/3.0 6 306 0.35 0.5 0.7 1.3 1.6 2.0 0.7 1.3 1.3 2.0 3.0 7 307 0.5 0.7 1.3 1.6 2.0 1.3/0.9 1.3 2.0/1.3 8 308 0.7 0.9 1.3 0.9 1.3 1.3 3.0 9 309 0.5 1.3/2.0 1.3 10 310 0.5 0.9 1.3 1.6 3.0 0.9 1.3 1.3 2.0 12 312 0.35 0.7 0.7 0.9 1.3 0.9 1.3 2.0 4.0/5.0 13 313 0.9 1.3 14 314 0.5 0.7 0.9 2.0 0.9 1.3 3.0/2.0 16 316 0.5 0.7 0.9 0.9 2.0 0.9 0.9 2.0 3.0 18 318 0.7 0.9 0.9 0.9 3.0/1.6 4.0 19 319 0.7 20 320 0.7 0.9 1.6 0.9 1.6 3.0 22 322 0.5 0.7 0.9 3.0/1.6 24 324 0.7 0.9 0.9 1.6 26 326 0.5 0.7 6 www.lemo.com Multipole Unipole Number of contacts Insert configuration 00-TT 0B-0K-0T 1B-1K-1T XB 2B-2K-2T 3B-3K-3T 4B-4K 5B-5K 00 0S-0E 1S-1E 2S-2E 3S-3E 4S-4E 5S-5E 6S-6E
Page9

® ® Series 30 330 0.7 0.9 1.3 1.3 2.0 32 332 0.5 2.0 36 336 1.3 2.01) 40 340 0.7 1.3 1.3 2.0 44 344 1.3 48 348 0.7 1.3 1.3 2.0 50 350 0.9 54 354 0.9 60 360 1.6 62 362 1.6 64 364 0.9 1.3 72 372 1.3 106 106 0.9 Note: 1) 2.0 is for 6S series, for 6E the values are 1.3 and 5.0. www.lemo.com 7 Multipole Number of contacts Insert configuration 00-TT 0B-0K-0T 1B-1K-1T XB 2B-2K-2T 3B-3K-3T 4B-4K 5B-5K 00 0S-0E 1S-1E 2S-2E 3S-3E 4S-4E 5S-5E 6S-6E
Page10

® ® Verify the fitting to your wire Verify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number or max. available section). Contact Conductor Solid Stranded 1) Contact type F ø A ø C Form A W G S e c t i o n AWG Section (mm2) r (N) Notes ( m m ) ( m m ) p e r fig. m a x . m a x(mm 2 . ) min. max. min. max. Solder 0.35 0.40 – 28 0.09 – 30 – 0.05 – 0.52) 0.402) – 28 0.09 – 30 – 0.05 – 0.5 0.457) – 28 0.09 – 28 – 0.09 – 0.73) 0.603) – 24 0.25 – 26 – 0.14 – 0.7 0.80 – 22 0.34 – 224) – 0.34 – 0.9 0.806) – 226) 0.346) – 224)6) – 0.346) – ø A ø C 1.3 1.00 – 20 0.50 – 204) – 0.50 – ø A 1.6 1.40 – 16 1.00 – 18 – 1.00 – lø C 2.0 1.80 – 14 1.50 – 16 – 1.50 – 3.0 2.70 – 10 4.00 – 12 – 4.00 – 4.0 3.70 – 10 6.00 – 10 – 6.00 – 5.0 5.20 – – – – 8 – 10.00 – 6.0 5.20 – – – – 8 – 10.00 – 8.0 7.00 – – – – 4 – 21.00 – 12.0 11.50 – – – – 0 – 50.00 – Crimp 0.55) 0.45 1 – – 32 28 0.035 0.09 12 l fig. 1 0.7 0.80 1 – – 26 224) 0.140 0.34 22 l ø A ø C 0.7 0.45 2 – – 32 28 0.035 0.09 22 l 0.9 1.10 1 – – 24 20 0.250 0.50 30 l ø A ø C 0.9 0.80 2 – – 26 224) 0.140 0.34 30 l 0.9 0.45 2 – – 32 28 0.035 0.09 30 l 1.3 1.40 1 – – 20 18 0.500 1.00 40 l 1.3 1.10 2 – – 24 20 0.250 0.50 40 l 1.3 0.80 2 – – 26 224) 0.140 0.34 40 l fig. 2 1.6 1.90 1 – – 18 144) 1.000 1.50 50 l ø A ø C 1.6 1.40 2 – – 22 18 0.340 1.00 50 l ø A ø C 2.0 2.40 1 – – 16 124) 1.500 2.50 65 l 2.0 1.90 2 – – 18 14 1.000 1.50 65 l 3.0 3.20 1 – – 14 104) 2.500 4.00 75 l 4.0 4.00 1 – – 12 10 4.000 6.00 90 l Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a). 2) for 00/TT multipole series. 3) for S, E series. 4) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor diameter is smaller than ø C. 5) for 00 /TT multipole series or for 0B/0T and 1B/1T series with male contacts. 6) for 0B.302/0B.303, 0K.302/0K.303 and 0T.302/0T.303 ø C = 1.0 mm, AWG max 20, section max (mm2) 0.50. 7) for 00/TT and 1B/1K/1T series, according to manufacturing and plating tolerance ø C min = 0.43 mm. l First choice alternative l Special order alternative 8 www.lemo.com
Page11

® ® Verify the fitting to your wire Verify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number or max. available section). Contact Conductor Solid Stranded 1) Contact type F ø A S e c t i o n AWG Section (mm2) r (N) Notes ( m m ) ( ø C mm) p F orm AWGe r fig. m a x . m a x(mm 2 . ) min. max. min. max. Print L ø A ø C L dimensions and C are detailed in the section on PCB drilling pattern. ø A ø C See page 163 and 167. l L Print (elbow) L ø A L dimensions and C are detailed in the section on PCB drilling pattern. See page 164 and 168. l ø C Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a). Verify the fitting to your cable Verify if the selected connector size fits to your cable diameter. Cable diameter range (mm) Cable diameter range (mm) Cable diameter range (mm) Series C o l le t Collet for fitting Series C o l le t Collet for fitting Collet for fitting a bend relief a bend relief Series C o ll e t a bend relief min. max. min. max. min. max. min. max. min. max. min. max. 001) 1.4 3.5 1.4 3.5 TT 2.4 3.0 2.4 3.0 0E 1.0 5.0 1.0 5.0 0B 1.4 5.6 1.4 5.2 0T 1.0 5.0 1.0 5.0 1E 1.3 8.53) 1.3 8.53) 1B 2.2 7.6 2.2 7.2 1T 1.3 6.5 1.3 6.5 2E 1.3 10.53) 1.3 10.53) XB 4.4 8.0 4.4 7.0 2T 1.3 8.5 1.3 8.5 3E 2.6 15.03) 2.6 15.03) 2B 1.4 9.9 1.4 9.2 3T 2.6 10.5 2.6 10.5 4E 4.8 23.53) 4.8 15.0 3B 4.2 11.9 4.2 11.0 002) 1.3 4.4 1.3 4.4 5E 9.6 23.5 – – 4B 4.9 16.0 4.9 15.0 0S 1.3 6.23) 1.3 6.23) 6E 13.0 30.0 – – 5B 9.6 25.0 9.6 15.5 1S 1.4 8.73) 1.4 8.73) 0K 1.0 5.0 1.0 5.0 2S 1.3 10.53) 1.3 10.53) 1K 1.3 8.53) 1.3 8.53) 3S 2.6 13.03) 2.6 13.03) 2K 1.3 10.53) 1.3 10.53) 4S 4.1 22.03) 4.1 13.0 3K 2.6 15.03) 2.6 15.03) 5S 6.1 30.0 – – 4K 4.6 23.53) 4.6 15.0 6S 11.1 30.0 – – 5K 9.6 23.5 – – Note: 1) for multipole only. 2) for unipole only. 3) for these series the maximum cable diameter require models with oversized cable collet (type K). www.lemo.com 9
Page12

® ® 1 0 www.lemo.com
Page13

B SERIES K SERIES (watertight) T SERIES (watertight)
Page14

B Series

® ® B Series B series connectors provide the following main features: – security of the Push-Pull self-latching system – multipole types 2 to 64 contacts – solder, crimp or print contacts (straight or elbow) – high packing density for space savings – multiple key options to avoid cross mating – keying system («G» key standard) of similar connectors for connector alignment – 360° screening for full EMC shielding. Metal housing models (page 14) Fixed plugs Straight plugs Fixed sockets Free sockets FAG FWG FGG EGG ECG PHG Elbow plugs FGG ENG ECG PHG FPG JGG EKG* EZG PNG Fixed sockets FHG FFG ESG* EYG PKG FNG EHG XPF* FMG* Fixed coupler PFG FEG EJG* PEG R FKG* FDG EEG Elbow socket models (page 25) FIG* EFG Elbow sockets FSG Note: * Contact LEMO for details. ECG EPG XBG, EXG Plastic housing models (page 28) Bridge models (page 34) Straight plugs Fixed sockets Plug with two Bridge plugs parallel sockets FGG FGG ENG FTG* FGY FGY ENY CFF, CRG Watertight or vacuumtight models (page 30) Threaded-latching models (page 35) Fixed plug Fixed sockets Fixed coupler Straight plugs Fixed socket HGG HHG HEG FVG ESG Elbow socket YHG S HNG HCG HMG FVB XRB 1 2 www.lemo.com
Page15

Part Numbering System、Part Section Showing Internal Components

® ® Part Numbering System Plug F G G . 1 B . 3 0 6 . C L A D 6 2 Free socket P H G . 1 B . 3 0 6 . C L L D 6 2 Z Variant: (page 71) Cable ø: (page 67) Collet type: (page 67) Fixed socket E G G . 1 B . 3 0 6 . C Y M Coupler R J G . 1 B . 3 0 6 . C L A Model: (page 14) Variant: (page 71) Alignment key: (page 36) Contact: (page 64) Series: (page 14) Insulator: (page 64) Insert configuration: (page 57) Housing: (page 64) FGG.1B.306.CLAD62 = straight plug with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, D type collet for 6.0 mm diameter cable. PHG.1B.306.CLLD62Z = free socket with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell in chrome- plated brass, PEEK insulator, female solder contacts, D type collet for 6.0 mm diameter cable and nut for fitting a bend relief. EGG.1B.306.CYM = fixed socket, nut fixing, with key (G), 1B series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK extended insulator, female crimp contacts. RJG.1B.306.CLA = straight fixed coupler with keys (J) at the flange end and key (G) at the other end, 1B series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male-female contacts. Part Section Showing Internal Components Fixed socket Straight plug 7 6 2 3 4 5 1 1 6 5 4 2 7 3 1 outer shell 1 outer shell 2 earthing crown 2 latch sleeve 3 retaining ring 3 collet nut 4 hexagonal nut 4 split insert carrier 5 locking washer 5 insulator 6 insulator 6 male contact 7 female contact 7 collet www.lemo.com 1 3
Page16

Metal housing models

® ® Metal housing models Technical Characteristics Mechanical and Climatical Electrical Characteristics Value Standard Characteristics Value Standard Endurance1) > 5000 cycles IEC 60512-5 test 9a Shielding at 10 MHz > 75 dB IEC 60169-1-3 Humidity up to 95% at 60° C efficiency at 1 GHz > 40 dB IEC 60169-1-3 Temperature range - 55° C, + 250° C Note: Resistance to vibrations 10-2000 Hz, 15g IEC 60512-4 test 6d the various tests have been carried out with FGG and EGG connectorpairs, with chrome-plated brass shell and PEEK insulator. Shock resistance 100 g, 6 ms IEC 60512-4 test 6c Detailed electrical characteristics, as well as materials and treatment arepresented in the chapter Technical Characteristics on page 182. Salt spray corrosion test > 1000h IEC 60512-6 test 11f 1) see page 189, contact resistance after mating cycles. See page 185,mechanical endurance latching force. Protection index (mated) IP 50 IEC 60529 Climatical category 55/175/21 IEC 60068-1 FGG Straight plug, key (G) or keys (A…M and R), cable collet Reference Dimensions (mm) Model Series A L M S1 S2 FGG 001) 6.4 28.5 20.5 5.5 5 ~L FGG 0B 9.5 36.0 26.0 8.0 7 ~M FGG 1B 12.0 43.0 32.0 10.0 9 FGG XB 13.0 44.0 33.5 11.0 10 FGG 2B 15.0 50.0 38.0 13.0 12 FGG 3B 18.0 58.0 43.0 15.0 14 S 2 S 1 FGG 4B 25.0 75.0 57.0 21.0 20 FGG 5B 35.0 103.0 78.0 31.0 30 M1 Cable assembly (page 169) Note: 1) the surface design of the 00 series is different. FGG Straight plug, key (G) or keys (A…M), cable collet and nut for fitting a bend relief 2) Reference Dimensions (mm) Model Series A L M S1 S2 FGG 001) 6.4 28.7 20.7 5.5 6 FGG 0B 9.5 35.0 25.0 8.0 7 ~L FGG 1B 12.0 42.0 31.0 10.0 9 ~M FGG XB 13.0 47.5 37.0 11.0 10 FGG 2B 15.0 49.0 37.0 13.0 12 FGG 3B 18.0 56.5 41.5 15.0 15 S 2 S 1 FGG 4B 25.0 71.0 53.0 21.0 20 M1 Cable assembly (page 169) Note: 1) the surface design of the 00 series is different. Note: 2) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page 145). 14 www.lemo.com ø A ø A
Page17

® ® JGG Straight plug, short version, key (G), cable collet ~L ~M Reference Dimensions (mm) Model Series A L M S1 S2 S 2 S 1 JGG 0B 9.5 32 22 8 7 M4 Cable assembly (page 171) FFG Straight plug, non-latching, key (G) or keys (A…M), cable collet Reference Dimensions (mm) Model Series A L M S1 S2 ~L ~M FFG 0B 9.5 36 26 8 7 FFG 1B 12.0 43 32 10 9 FFG 2B 15.0 50 38 13 12 FFG 3B 18.0 58 43 15 14 S 2 S 1 FFG 4B 25.0 75 57 21 20 M1 Cable assembly (page 169) FNG Straight plug, key (G) or keys (A…M and R), cable collet and lanyard release Reference Dimensions (mm) Model Series A B L M N S1 S2 FNG 0B 9.5 15.5 36.0 26.0 140 8 7 ~L FNG 1B 12.0 18.0 43.0 32.0 140 10 9 ~M FNG 2B 15.0 21.0 49.0 37.0 160 13 12 FNG 3B 18.0 25.0 58.0 43.0 190 15 14 FNG 4B 25.0 32.0 75.0 57.0 230 21 20 FNG 5B 35.0 42.0 103.0 78.0 300 31 30 M1 Cable assembly (page 169) S 2 S 1 Note: cable material: stainless steel with Polyamide sheath. www.lemo.com 15 N ø A B ø A ø A
Page18

® ® FEG Straight plug, key (G) or keys (A…L), cable collet, front seal and nut for fitting a bend relief 1) (IP 54 protection index when mated) Reference Dimensions (mm) Model Series A L M S1 S2 ~L FEG 0B 11.0 35.0 25.0 8 7 ~M FEG 1B 13.5 42.0 33.0 10 9 FEG 2B 16.5 48.0 36.0 13 12 FEG 3B 19.0 56.5 41.5 15 15 S 2 S 1 M1 Cable assembly (page 169) Note: 1) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page 145). FDG Straight plug, long version, key (G) or keys (A…L), cable collet ~L Reference Dimensions (mm) ~M Model Series A L M S1 S2 FDG 1B 12 68 57 10 9 FDG 2B 15 79 67 13 12 S 2 S 1 M2 Cable assembly (page 171) FWG Fixed plug, nut fixing, key (G) or keys (A…L) L maxi Reference Dimensions (mm) N Model Series A B e E L M N1) S1 S3 S 3 M FWG 0B 14.0 12.4 M9x0.6 1.8 22.5 14.5 19.5 8.2 11 FWG 1B 18.0 15.8 M12x1.0 2.9 24.9 17.0 24.8 10.5 14 FWG 2B 19.5 19.2 M15x1.0 4.1 28.6 18.0 27.3 13.5 17 FWG 3B 25.0 25.0 M18x1.0 4.2 32.1 23.0 31.5 16.5 22 E maxi S 1 P9 Panel cut-out (page 157) Note: 1) maximum length with crimp contacts 16 www.lemo.com ø B e ø A ø A ø A
Page19

® ® FAG Fixed plug, non-latching, nut fixing, key (G) or keys (A…M and R) Reference Dimensions (mm) Model Series A B e E L M N1) S1 S3 FAG 00 8 10.2 M7x0.5 2.9 18.1 9.0 15.0 6.3 9 L maxi FAG 0B 10 12.4 M9x0.6 4.2 20.8 11.5 18.9 8.2 11 N FAG 1B 14 15.8 M12x1.0 5.4 25.2 12.5 21.6 10.5 14 S 3 M FAG 2B 18 19.2 M15x1.0 6.0 28.7 13.8 23.9 13.5 17 FAG 3B 22 25.0 M18x1.0 5.8 32.1 17.0 30.2 16.5 22 FAG 4B 29 34.0 M25x1.0 6.8 37.1 20.5 34.7 23.5 30 FAG 5B 40 40.0 M35x1.0 6.8 47.1 28.0 42.8 33.5 – E maxi S 1 P1 Panel cut-out (page 157) Note: The 5B series is delivered without locking washer or tapered washer and with a round nut. Note: 1) maximum length with crimp contacts. FPG Elbow (90°) plug, key (G) or keys (A…M and R), cable collet L Reference Dimensions (mm) S 1 M Model Series A H L M S1 S2 S3 FPG 00 7.5 18 24.5 16.5 6.5 5 5.3 FPG 0B 9.5 23 30.0 20.0 8.0 7 8.0 S 3 FPG 1B 12.0 29 36.0 25.0 11.0 9 10.0 S 2 FPG 2B 15.0 35 41.5 29.5 13.5 12 13.0 M3 Cable assembly (page 169) FHG Elbow (90°) plug, key (G) or keys (A…M and R), cable collet L S 1 M Reference Dimensions (mm) Model Series A D H L M S1 S2 S3 FHG 3B 19 10 37 50 35 17 14 15 S 3 FHG 4B 26 15 52 67 49 22 20 21 S 2 FHG 5B 36 21 74 90 65 32 30 31 D M3 Cable assembly (page 169) FSG Anglissimo right angle plug, key (G) or keys (A…M), cable collet L Reference Dimensions (mm) M Model Series A H L M S1 S2 FSG 00 8.0 18.1 24.8 16.8 5 7 FSG 0B 10.0 22.4 30.3 20.3 7 9 S 2 FSG 1B 12.0 26.4 36.5 25.5 9 11 S 1 FSG 2B 16.5 34.5 44.0 32.0 12 15 M5 Cable assembly (page 170) www.lemo.com 1 7 ~H ~H ~H ø B e ø A ø Aø A ø A
Page20

® ® EGG Fixed socket, nut fixing, key (G) or keys (A…M and R) Reference Dimensions (mm) Model Series A B e E L M N1) S1 S3 EGG 00 8 10.2 M7x0.5 6.0 15.5 1.0 13.7 6.3 9 L maxi EGG 0B 10 12.4 M9x0.6 7.0 20.7 1.2 19.1 8.2 11 N EGG 1B 14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14 S 3 M EGG XB 16 19.0 M14x1.0 7.0 23.5 1.5 20.0 12.5 17 EGG 2B 2) 18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17 EGG 3B 22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22 EGG 4B 28 34.0 M25x1.0 12.0 35.7 2.5 34.1 23.5 30 E maxi S 1 EGG 5B 40 40.0 M35x1.0 11.0 43.5 3.0 39.6 33.5 – P1 Panel cut-out (page 157) Note: The 5B series is delivered with a tapered washer and a round nut. Note: 1) maximum length with crimp contacts. 2) EGG.2B.304.CLL and EGG.2B.307.CLL are UL 508A under file E119802. ENG Fixed socket with earthing tag, nut fixing, key (G) or keys (A…M) Reference Dimensions (mm) Model Series A B e E L M N1) S1 S3 L maxi ENG 00 8 10.2 M7x0.5 6.0 15.5 1.0 13.7 6.3 9 N ENG 0B 10 12.4 M9x0.6 7.0 20.7 1.2 19.1 8.2 11 S 3 M ENG 1B2) 14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14 ENG 2B 18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17 ENG 3B 22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22 ENG 4B 28 34.0 M25x1.0 12.0 35.7 2.5 34.1 23.5 30 E maxi S 1 P1 Panel cut-out (page 157) Note: 1) maximum length with crimp contacts. 2) for the 1B series the earthing tag is on the same side of the key. EHG Fixed socket, nut fixing, key (G) or keys (A…M and R), and protruding shell Reference Dimensions (mm) Model Series A B e E L M N1) S1 S3 L maxi EHG 00 8 10.2 M7x0.5 2.0 15.5 8.5 13.7 6.3 9 N EHG 0B 10 12.4 M9x0.6 2.0 19.5 12.5 19.1 8.2 11 S 3 M EHG 1B 14 15.8 M12x1.0 4.0 21.7 12.0 21.1 10.5 14 EHG 2B 18 19.2 M15x1.0 5.1 22.7 12.5 24.6 13.5 17 EHG 3B 22 25.0 M18x1.0 7.1 30.7 13.5 30.3 16.5 22 EHG 5B 40 40.0 M35x1.0 2.5 43.5 28.0 38.5 33.5 – E maxi S 1 P1 Panel cut-out (page 157) Note: The 5B series is delivered without locking washer or tapered washer and with a round nut. Note: 1) maximum length with crimp contacts. 1 8 www.lemo.com ø B ø B ø B e e e ø A ø A ø A