Hirose Electric FH62 Series

0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector FH62 Series Dimension diagram : 35 pos. 11.96mm (35 pos.) 1.1mm 4.0mm 0.9mm (width) 0.5mm (guide) Fig.1 Single action lock [Before mating] ■Features 1． Space-saving design ・Space saving design with 0.25mm pitch, 4.0mm width. (Fig.1) 2． Automatic single action lock design ・Easy to use single action lock design by simply inserting FPC after mounting. (Fig.2) (Release the lock by operating or opening the lock lever when removing FPC.) [After mating] ・Operation of the lock lever is not required at the time of mating FPC. Can be operated with one hand. ・Operation of the lock lever is not required at the time of mating FPC. Contributes to assembly time reduction. ・Operation of the lock lever is not required at the time of Just insert it! mating FPC. Fig.2 Lock lever will not be damaged by operation. ・Operation of the lock lever is not required at the time of mating FPC. High FPC retention force through the lock design No lever at insertion eliminates failures due to FPC [FPC being inserted] movement during locking. 3． High FPC retention force [FPC inserted] ・The notches on both sides of FPC are held by the lock lever, generating a high FPC retention force in spite of the small size. (Fig.3) 4． Easy FPC insertion ・Wide guide for easy FPC insertion easy. (Fig.1) 5． Supports 0.3mm-thick FPC ・The design accommodates a rigid 0.3mm-thick FPC, which helps to prevent deformation of the FPC upon Disengagement prevention! Fig.3 insertion. 6． Supports high speed transmission Supports high speed transmission (Differential impedance) ・Supports high speed transmission with excellent 130ps rise time (20-80%) impedance properties. By making a differential pair with the same type of contacts (even number-even number of contacts, odd number-odd-number of contacts) excellent transmission characteristics are achieved, supporting eDP (ver1.4), MIPI (D-PHY) and USB3.0 standards. (Fig.4) 7． Environmental ・Halogen free *As defined by IEC 61249-2-21. Br : 900ppm max, Cl : 900ppm max, Br＋Cl : 1,500ppm max Fig.4 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 2017.9② 1 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector ■Product Specifications Rated current 0.25A Operating temperature range -55ç to +85°C (Note 1) Storage temperature range -10ç to +50°C (Note 2) Rating Relative humidity 90% max. Relative humidity 90% max. Rated voltage 30V AC/DC Operating humidity range (No condensation) Storage humidity range (No condensation) Adaptive FPC/FFC Thickness : = 0.3±0.03mm Gold plated contact traces contact specifications Item Specification Conditions 1. Insulation resistance 50ø min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown 90V AC rms / 1 minute 3. Contact 100mø max. 1mA (AC) resistance * Including FPC conductor resistance 4. Durability Contact resistance : 100mø max. 10 cycles (insertion / withdrawal) No damage, cracks, or parts dislocation No electrical discontinuity of 1µs or more Frequency : 10 to 55Hz, single amplitude of 0.75mm, 5. Vibration Contact resistance : 100mø max. 10 cycles in each of the 3 directions No damage, cracks, or parts dislocation No electrical discontinuity of 1µs or more Acceleration of 981m/s2, duration of 6ms, sine half-wave 6. Shock Contact resistance : 100mø max. waveform, 3 cycles in each of the 3 axes No damage, cracks, or parts dislocation Contact resistance : 100mø max. 7. H umidity 96 hours at temperature of 40ç and humidity of 90% to Insulation resistance : 50Mø min. (Steady state) 95% No damage, cracks, or parts dislocation Contact resistance : 100mø max. Temperature : -55°C / +15ç to +35ç / +85ç / +15ç to +35ç 8. Temperature Insulation resistance : 50Mø min. Time : 30 / 2 to 3 / 30 / 2 to 3 (Minutes) cycle No damage, cracks, or parts dislocation 5 cycles 9. Resistance to No deformation of components affecting Reflow : See recommended temperature profile (Page 8) soldering heat performance Manual soldering: 350 ± 10°C for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity Range covers non-conducting condition of installed connectors in storage, shipment or during transportation. ■Materials / Finish Part Material Color / Finish Remarks LCP Beige Insulator UL94V-0 Polyamide Black Contacts Copper alloy Gold plated –––––– ■Product Number Structure Refer to the chart below when datermining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. FH 62 − 35S − 0.25 SHW (10) ❹ ❺ ❻ Series name：FH Termination type Series Ｎo．：62 　 SHW・・・SMT Horizontal staggered Number of contacts： 35 　　　　 array mounting type Contact pitch：0.25mm Specifications (10)：Standard (5,000pcs/reel) (99)：500pcs/reel 2 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector ■Connector Dimensions A±0.15 (0.25) B±0.15 0.5±0.1 Connect HRS mark Cavity No. (0.22) No.2 Number of contacts ＊＊ ) (180 ° Contact Lot No. Polarity mark No.1 0.5±0.1 (0.22) 0.5±0.1 (0.22) C±0.15 D±0.15 (2.05) 7 Figure -1 1.015±0.1 (E) 4±0.1 (2.6) 2.51±0.1 (1.25) (0.8) (0.68) 0.425±0.1 3.125±0.15 0.45±0.1 Position of the contact point Lock lever tab Position of the contact point Note 1 : The dimension in parentheses are for reference. 2 : Lead co-planarity including reinforced chucking metals shall be 0.1 max. 3 : To be delivered with tape and reel packages. See the packaging specifications for details. 4 : Note that preventive hole for sink mark or slit could be added for improvement. 5 : The quality remains good, even with the dark spots, which could occasionally occur on molded plastic. 6 : This product satisfies halogen free requirements defined as 900ppm maximum chlorine, 900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine. 7 Figure-1 Shows the state of opened lock cover. FPC can be pulled out by opening the lock lever by 45 degrees or more. ■Connector Dimensions Units : mm Part No. HRS No. No. of contacts A B C D E FH62-13S-0.25SHW(**) Under planning (Note 1) 13 6.46 2.5 3 6 4.43 FH62-15S-0.25SHW(**) Under planning (Note 1) 15 6.96 3 3.5 6.5 4.93 FH62-17S-0.25SHW(**) Under planning (Note 1) 17 7.46 3.5 4 7 5.43 FH62-19S-0.25SHW(**) Under planning (Note 1) 19 7.96 4 4.5 7.5 5.93 FH62-21S-0.25SHW(**) Under planning (Note 1) 21 8.46 4.5 5 8 6.43 FH62-23S-0.25SHW(**) Under planning (Note 1) 23 8.96 5 5.5 8.5 6.93 FH62-25S-0.25SHW(**) Under planning (Note 1) 25 9.46 5.5 6 9 7.43 FH62-27S-0.25SHW(**) Under planning (Note 1) 27 9.96 6 6.5 9.5 7.93 FH62-31S-0.25SHW(**) Under planning (Note 1) 31 10.96 7 7.5 10.5 8.93 FH62-35S-0.25SHW(**) 580-4300-0 ** 35 11.96 8 8.5 11.5 9.93 FH62-39S-0.25SHW(**) Under planning (Note 1) 39 12.96 9 9.5 12.5 10.93 FH62-41S-0.25SHW(**) Under planning (Note 1) 41 13.46 9.5 10 13 11.43 FH62-51S-0.25SHW(**) Under planning (Note 1) 51 15.96 12 12.5 15.5 13.93 FH62-55S-0.25SHW(**) Under planning (Note 1) 55 16.96 13 13.5 16.5 14.93 FH62-61S-0.25SHW(**) Under planning (Note 1) 61 18.46 14.5 15 18 16.43 Note 1 : Contact positions without HRS No. are currently under planning. Please contact hirose for detailed information about product variation. 3 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. （FPC： t＝0.3） 0.31±0.1 (0.34) (Pickup area) (2.61) 3.71±0.1 0.29±0.1 1.1±0.1 (3.69)

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector □Recommended PCB Mounting Pattern (0.25) B (n-1)/2× 0.5 0.3 ±0.02 0.02 X Contact No.2 （Connector image） 0.6 0.5 Contact No.1 (n+1)/2× 0.3 ±0.02 0.02 X C ±0.02 X ×4 0.4 ±0.02 F 0.02 X □Recommended Stencil Pattern Recommended stencil thickness： t=0.1 (0.25) B (n-1)/2× 0.5 0.25 ±0.01 0.02 Y 0.6 0.5 （Land pattern image） (n+1)/2× 0.25 ±0.01 C ±0.02 0.02 Y Y ×4 0.35 ±0.01 F 0.02 Y Note 8 : 'n' shows the number of contacts. □Recommended Dimensions of PCB Mounting Pattern and Stencil Pattern Units : mm Part No. HRS No. No. of contacts B C F FH62-13S-0.25SHW(**) Under planning (Note 1) 13 2.5 3 6.1 FH62-15S-0.25SHW(**) Under planning (Note 1) 15 3 3.5 6.6 FH62-17S-0.25SHW(**) Under planning (Note 1) 17 3.5 4 7.1 FH62-19S-0.25SHW(**) Under planning (Note 1) 19 4 4.5 7.6 FH62-21S-0.25SHW(**) Under planning (Note 1) 21 4.5 5 8.1 FH62-23S-0.25SHW(**) Under planning (Note 1) 23 5 5.5 8.6 FH62-25S-0.25SHW(**) Under planning (Note 1) 25 5.5 6 9.1 FH62-27S-0.25SHW(**) Under planning (Note 1) 27 6 6.5 9.6 FH62-31S-0.25SHW(**) Under planning (Note 1) 31 7 7.5 10.6 FH62-35S-0.25SHW(**) 580-4300-0 ** 35 8 8.5 11.6 FH62-39S-0.25SHW(**) Under planning (Note 1) 39 9 9.5 12.6 FH62-41S-0.25SHW(**) Under planning (Note 1) 41 9.5 10 13.1 FH62-51S-0.25SHW(**) Under planning (Note 1) 51 12 12.5 15.6 FH62-55S-0.25SHW(**) Under planning (Note 1) 55 13 13.5 16.6 FH62-61S-0.25SHW(**) Under planning (Note 1) 61 14.5 15 18.1 Note 1 : Contact positions without HRS No. are currently under planning. Please contact hirose for detailed information about product variation. 4 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 0.8±0.02 2.8±0.02 0.8±0.02 0.67±0.01 3.4±0.01 0.77±0.01 (0.175) (0.3) 3.4±0.01 0.63±0.01 0.8±0.02 2.8±0.02

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector □Diagram of a recommended FPC dimension (when using plated lead part) (FPC contact thickness : t=0.30±0.03) Contact No.1 G±0.05 0.7±0.07 C±0.02 0.215±0.02 0.7±0.07 X 0.3±0.03 0.07±0.07 B R 110.2± 0.250 0.07±0.02 (n+1)/2×.0 0.07±0.02 0.28±0.035 0.02 X R0.2±0.05 (R0.1) 0.45±0.05 0.45±0.05 0.15±0.02 0.15±0.02 Contact No.2 (n-1)/2× 0.28±0.03 0.02 X 10 G±0.05 Note 9 Dimension R must be 0.5mm minimum. 10 Indicated tolerance is applicable to the exposed conductor. 11 Both end sides of contact pad on FPC cannot be used for signal transmission. □Recommended FPC dimension (when not using plated lead part) (FPC contact thickness : t=0.30±0.03) G±0.05 0.7±0.07 C±0.02 0.285±0.02 0.7±0.07 Y 0.3±0.03 0.15±0.02 0.07±0.07 B Contact No.1 11 0.25 0.07±0.02 0.43±0.03 (n+1)/2× 0.02 Y R0.2±0.05 (R0.1) 0.45±0.05 0.15±0.02 0.45±0.05 0.15±0.02 Contact No.2 R0 (n-1)/2× .2± 0.28±0.03 0 0.02 Y .05 10 G±0.05 Note 9 Dimension R must be 0.5mm minimum. 10 Indicated tolerance is applicable to the exposed conductor. 11 Both end sides of contact pad on FPC cannot be used for signal transmission. 5 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 2.2±0.3 R (exposed part of the conductor) 0.1 2.2±0.35 R ± (exposed part of the conductor)R0 1.35±0.05 0 0. .1 .1 5 05 5 1.35±0.05 R ±0 0.82±0.1 ±0.0 0.65±0.050.1 .05 5 0.65±0.05 5 ± 0±0.070. 0.4±0.0205 0.07±0.02 0±0.07 0.18±0.02 0.27±0.1 0.5±0.1 0.23±0.1 0.27±0.1 0.82±0.1 0.5±0.1 1.5±0.1 0.82±0.1 1.65±0.1 1.5±0.1 1.65±0.1 9 R 9 R 3.2±0.3 Stiffener 3.2±0.3 Stiffener R0.2±0.0 5 .05 ±0.2 R0

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector □Recommended FPC Dimensions Units : mm Part No. HRS No. No. of contacts B C G FH62-13S-0.25SHW(**) Under planning (Note 1) 13 2.5 3 4.4 FH62-15S-0.25SHW(**) Under planning (Note 1) 15 3 3.5 4.9 FH62-17S-0.25SHW(**) Under planning (Note 1) 17 3.5 4 5.4 FH62-19S-0.25SHW(**) Under planning (Note 1) 19 4 4.5 5.9 FH62-21S-0.25SHW(**) Under planning (Note 1) 21 4.5 5 6.4 FH62-23S-0.25SHW(**) Under planning (Note 1) 23 5 5.5 6.9 FH62-25S-0.25SHW(**) Under planning (Note 1) 25 5.5 6 7.4 FH62-27S-0.25SHW(**) Under planning (Note 1) 27 6 6.5 7.9 FH62-31S-0.25SHW(**) Under planning (Note 1) 31 7 7.5 8.9 FH62-35S-0.25SHW(**) 580-4300-0 ** 35 8 8.5 9.9 FH62-39S-0.25SHW(**) Under planning (Note 1) 39 9 9.5 10.9 FH62-41S-0.25SHW(**) Under planning (Note 1) 41 9.5 10 11.4 FH62-51S-0.25SHW(**) Under planning (Note 1) 51 12 12.5 13.9 FH62-55S-0.25SHW(**) Under planning (Note 1) 55 13 13.5 14.9 FH62-61S-0.25SHW(**) Under planning (Note 1) 61 14.5 15 16.4 Note 1 : Contact positions without HRS No. are currently under planning. Please contact hirose for detailed information about product variation. □FPC Construction (Recommended Specifications) MATERIAL NAME MATERIAL THICKNESS (μm) Covering film layer Polyimide　1mil 25 Cover adhesive 25 Surface 1μm to 6μm nickel underplated treatment 0.2μ （4）m gold plated Copper foil Cu　1oz 35 Base adhesive Heat-hardened adhesive 25 Base film Polyimide 　1mil 25 Reinforcement Heat-hardened adhesive 35 material adhesive Stiffener Polyimide　7mil 175 3. Caution 1. M aterial composition of FPC is a reference example. Please adjust the thickness of the FPC mating section to 0.3±0.03mm in reference to the material composition. 2. For the details of the material composition, please contact each FPC manufacturer. 6 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector □Packaging Specifications ●Embossed Carrier Tape Dimensions ●Embossed Carrier Tape Dimensions (Tape width up to 24mm) (Tape width 32mm and over) 8±0.1 8±0.1 (1.35) 4±0.1 (1.35) 4±0.1 (0.3) (2) (0.3) (2 ) CL Direction of unreeling CL 1.5＋ 0.1 0 ●Reel Dimensions ●Leader, Trailer Dimensions （N： Reel inner width） Direction of Direction of unreeling unreeling 400mm MIN（ Leader） Embossed carrier tape Top cover tape 160mm MIN 100mm MIN （Trailer, empty components） （empty components） （P： Reel outer width） Units : mm Part No. HRS No. No. of contacts K L M N P FH62-13S-0.25SHW(**) Under planning (Note 1) 13 16 - 7.5 17.4 21.4 FH62-15S-0.25SHW(**) Under planning (Note 1) 15 FH62-17S-0.25SHW(**) Under planning (Note 1) 17 FH62-19S-0.25SHW(**) Under planning (Note 1) 19 FH62-21S-0.25SHW(**) Under planning (Note 1) 21 FH62-23S-0.25SHW(**) Under planning (Note 1) 23 FH62-25S-0.25SHW(**) Under planning (Note 1) 25 24 - 11.5 25.4 29.4 FH62-27S-0.25SHW(**) Under planning (Note 1) 27 FH62-31S-0.25SHW(**) Under planning (Note 1) 31 FH62-35S-0.25SHW(**) 580-4300-0 ** 35 FH62-39S-0.25SHW(**) Under planning (Note 1) 39 FH62-41S-0.25SHW(**) Under planning (Note 1) 41 FH62-51S-0.25SHW(**) Under planning (Note 1) 51 FH62-55S-0.25SHW(**) Under planning (Note 1) 55 32 28.4 14.2 33.4 37.4 FH62-61S-0.25SHW(**) Under planning (Note 1) 61 Note 1 : Contact positions without HRS No. are currently under planning. Please contact hirose for detailed information about product variation. 7 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. （Ø13） (Ø380) (Ø80) M±0.1 1.75±0.1 +0.3 K -0.1 1.7＋0.15 0 M±0.1 1.75±0.1 L±0.1 K±0.3 .1 ＋0 5 0 1.Ø ＋0 .1 0 1.5 Ø

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector □Temperature Profile MAX 250℃ Applicable Conditions 245 Reflow method : IR/Hot air 220℃ Reflow environment : Room air Solder : Paste type Sn/3.0Ag/0.5Cu 200 180℃ ( M705-GRN360-K2-V made by Senju Metal Industry Co.) 150 Test PCB : PCB material and size 150℃ Glass epoxy 32.85×18.3×0.8mm L and size, per recommended on page 4. 100 Metal mask : Thickness and opening size Per recommended on page 4. 20 to 40 sec. 50 Peak temperature This temperature profile is based on the above conditions. 25℃ 120±5 sec. 60 to 90 sec. It may vastly depending on solder paste type, manufacturer, Preheating time Soldering time PCB size and mounting materials. Please use only after 0 checking the mounting conditions. Start Time（ sec.） 8 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Temperature（ ℃）

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector □Connector operation and points to note [Operation method] As this connector is a small-sized, thin product, care needs to be taken when handling. Please check the following before use. 1. Initial condition ❶The product is delivered with the lock lever closed, you do not need to operate it except for when removing the FPC. 2. How to insert FPC ❶Insert FPC with the conductor surface facing upwards, horizontal to the board surface. [Caution] ・ During FPC insertion, do not twist the FPC to up and down, right and left or an angle. It may cause deformation of the contacts and contact failure. Lock lever (closed) FPC (horizontal) Lock lever (closed) FPC (horizontal) NG NG NG Lock lever (closed) Lock lever (open) FPC diagonal FPC (diagonal) 3. Check the inserted state of FPC When FPC is completely inserted, visually inspect the status. OK NG NG The outer shapes of FPC and the lock lever are FPC is not inserted deep enough. FPC is inserted diagonally. parallel and inserted to the end. 9 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector □Connector operation and points to note [Operation method] 4. How to remove FPC ❶Push up the lock lever slowly, and release the lock. [Caution] ・ The lock lever can't be opened over 180°. ・ After releasing the lock lever, do not touch the contact. ・ Do not raise, pull, or twist the lock lever. OK NG NG NG 180° Do not touch the contact. Load is concentrated on the rotation axis, Excessive load is Rotational axis and leads to breakage. applied to the lock lever. ❷After releasing the lock lever, remove the FPC in the horizontal direction. ❸After remove of the FPC, close the lock lever. [Caution] ・ Do not pull out FPC while the lock lever is not opened to 45° or more. ・ Ensure both ends of the lock lever are closed. Lock lever (open) OK 45° or more 45° FPC can be removed without letting the lock lever interfere with FPC. OK OK Close the both ends of the lock lever. NG FPC diagonal FPC diagonal 10 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector □Connector operation and points to note [Operation methods] 5. FPC routing after connection qDepending on a FPC rounding, a load is applied to connector, and a contact failure may occur. To prevent a failure, take the following notes into a consideration during mechanism design. [Caution] • Make sure that FPC and stiffener do not contact chassis. • Avoid applying forces to FPC in vertical or horizontal directions. In addition, avoid pulling up and down on the FPC. • When fixing FPC after FPC cabling, avoid pulling FPC, and route the wire FPC with slack. In this regard, the stiffener is parallel to the PCB. • Do not mount other components touching to the FPC underneath the FPC stiffener. OK NG NG NG Stiffener Stiffener The state where a load is applied to FPC Mounting parts interfer with FPC The state where a load is applied to FPC [Cautions when Mounting PCB] SWarp of PCB Minimize warp of the PCB as much as possible. Lead co-planarity including reinforced metals is 0.1mm or less. Too much wrap of the PCB may result in a soldering failure. SFlexible board design Please make sure to put a stiffener on the backside of the flexible board. We recommend a glass epoxy material with the thickness of 0.3mm MIN. SLoad to Connector Do not add 1.0N or greater external force when unreel or pick and place the connector etc, or it may get broken. In addition, do not insert the FPC or operate the connector before mounting. SLoad to PCB Connector • Splitting a large PCB into several pieces FPC • Screwing the PCB (for mounting connector) Avoid the handling described above so that no force is exerted on the PCB during the assembly process. Otherwise, the connector may become defective. SInstructions on manual soldering Follow the instructions shown below when soldering the connector manually during work, etc. ❶Do not perform any reflow or hand soldering operation while FPC is inserted in the connector. ❷Do not apply extreme heat, or allow the soldering iron to touch anything other than the connector lead. This could cause the connector to be deformed or melted. ❸Do not supply excessive solder (flux). If excessive solder (flux) is applied to the contact, the solder or flux could adhere on the contact point and cause contact failure. 11 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

FH62 Series●0.25mm pitch, 1.1mm high, Top Contact Single Action Lock, High FPC Retention Force FPC connector USA: USA: USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 2300 Warrenville Road, Suite 150, 2841 Junction Ave, Suite 200 17197 N. Laurel Park Drive, Suite 253, Downers Grove, IL 60515 San Jose, CA. 95134 Livonia, MI 48152 Phone : +1-630-282-6700 Phone : +1-408-253-9640 Phone : +1-734-542-9963 http://www.hirose.com/us/ Fax : +1-408-253-9641 Fax : +1-734-542-9964 http://www.hirose.com/us/ http://www.hirose.com/us/ USA: THE NETHERLANDS: GERMANY: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE HIROSE ELECTRIC EUROPE B.V. HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH 300 Brickstone Square Suite 201, Hogehillweg #8 1101 CC Amsterdam Z-O Schoenbergstr. 20, 73760 ostfildern Andover, MA 01810 Phone : +31-20-6557460 Phone : +49-711-456002-1 Phone : +1-978-662-5255 Fax : +31-20-6557469 Fax : +49-711-456002-299 http://www.hirose.com/eu/ http://www.hirose.com/eu/ GERMANY: GERMANY: FRANCE: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Bayernstr. 3, Haus C 30855 Langenhagen, Germany 130 Avenue Joseph Kessel, Bat E, 78960 Phone : +49-911 32 68 89 63 Phone : +49-511 97 82 61 30 Voisins le Bretonneux, France Fax : +49-911 32 68 89 69 Fax : +49-511 97 82 61 35 Phone : +33-1-85764886 http://www.hirose.com/eu/ http://www.hirose.com/eu/ Fax : +33-1-85764823 http://www.hirose.com/eu/ UNITED KINGDOM: CHINA: CHINA: HIROSE ELECTRIC EUROPE BV (UK BRANCH) HIROSE ELECTRIC (SHANGHAI) CO., LTD. HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH 4 Newton Court, Kelvin Drive, Knowlhill, 18, Enterprise Center Tower 2, 209# Gong He A1001, Ocean International Center, Building 56# East 4th Milton Keynes, MK5 8NH Road, Jing’an District, Shanghai, CHINA 200070 Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +44-1908 202050 Phone : +86-21-6391-3355 Phone : +86-10-5165-9332 Fax : +44-1908 202058 Fax : +86-21-6391-3335 Fax : +86-10-5908-1381 http://www.hirose.com/eu/ http://www.hirose.com/cn/ http://www.hirose.com/cn/ CHINA: HONG KONG: TAIWAN: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377 Phone : +86-755-8207-0851 Phone : +852-2803-5338 Fax : +886-2-2555-7350 Fax : +86-755-8207-0873 Fax : +852-2591-6560 http://www.hirose.com/tw/ http://www.hirose.com/cn/ http://www.hirose.com/hk/ KOREA: SINGAPORE: INDIA: HIROSE KOREA CO.,LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE 143, Gongdan 1-daero, Siheung-si, 03, Anson Road, #20-01, Springleaf Tower, Office NO.552, Regus-Green Boulevard, Level5, Tower C, Gyeonggi-do, 15084, Korea Singapore 079909 Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +82-31-496-7000 Phone : +65-6324-6113 Phone : +91-12-660-8018 Fax : +82-31-496-7100 Fax : +65-6324-6123 Fax : +91-120-4804949 http://www.hirose.co.kr/ http://www.hirose.com/sg/ http://www.hirose.com/sg/ INDIA: MALAYSIA: THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Lepas Penang, 11950, Malaysia Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +91-80-4120 1907 Phone : +604-648-5536 Phone : +66-2-686-1255 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ Fax : +66-2-686-3433 http://www.hirose.com/sg/ http://www.hirose.com/sg/ ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 12 The contents of this catalog are current as of date of 09/2017. Contents are subject to change without notice for the purpose of improvements. Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.