Hirose Electric HR30 Series

Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and 6 pos. 42.1 10 and 12 pos. Fig.1 Features Lock/release operation 1. Small-size with low profile 3, 6 contacts : M aximum outer diameter Ø12.6mm Push-pull- single action lock Mated length 32.3mm (from the panel surface) 10, 12 contacts : Maximum outer diameter Ø15.5mm Mated length 42.1mm (from the panel surface) These small, compact connectors offer unique Fig.2 features available only from Hirose. 2. Waterproof construction IP67 and 68 waterproof construction in the mated state IP67 : Left submerged in water at a depth of 1m for 30 minutes Alignment marks IP68 : Left submerged in water at a depth of 2m for 14 days 3. Push/pull lock Waterproof connectors feature an easy to operate Push-pull locking collar push/pull locks developed with our exclusive technology. 4. Light weight 3 and 6 contacts: 6g (plug + receptacle) 10 and 12 contacts: 9g (plug + receptacle) 5. Clamp structure Our proprietary clamping method allows clamping the cable by simply tightening the cord ring. 6. Easy mating operation The plug can be securely locked while holding it in your hand while mating. (Fig.2) Polarized interface 7. Mis-insertion prevention Fig.3 Mating portions are polarized to avoid improper mating and connector damage. 8. Mating mark Both the plug and the receptacle feature a white index mark on them which is used to quickly align the two interfaces for proper mating.(Fig.3) 9. Complies with the RoHS requirements In consideration of environmental issues, we use only materials that comply with the RoHS Directive. In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 2020.9⑥ 1 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Ø12.6 Ø15.5

HR30 Series●Miniature Waterproof Plastic Connectors Product Specifi cations 5A (3 pos.) Current rating Operation Temperature Range -25ç to +85ç 2A (6,10,12 pos.) Ratings 100V AC,140V DC(3,6 pos.) Voltage rating StorageTemperature Range -10ç to +60ç 30V AC,42V DC(10,12 pos.) Characteristic Specifi cation Conditions 5mø max. (3 pos.) 1.C ontact 15mø max. (Solder type : 6, 10, and 12 pos.) 1A DC resistance 30mø max. (Through hole type: 6 and 12 pos.) 2. Insulation 1000Mø min. 100V DC resistance 3.W ithstanding No fl ashover or insulation breakdown 300V AC / 1minute voltage Frequency : 10 to 55 Hz, single amplitude of 0.75mm, 4. Vibration No electrical discontinuity of 10µs or more 1 cycle= 5min, 10 cycles in each of the 3 directions. Contact resistance 10mø min.(3 pos.) 5. Durability Contact resistance 30mø min. (Solder type: 6, 10, and 12 pos.) 1000 cycles (mating/un-mating) Contact resistance 100mø min. (Through hole type: 6 and 12 pos.) (-55ç : 30 minutes → Room temperature : 10 to 15 6. Temperature Insulation resistance 100Mø min. minutes → +85ç : 30 minutes → Room temperature : cycle 10 to 15 minutes) for 5 cycles Insulation resistance 7.H umidity 96 hours at temperature of 40ç and humidity of 10Mø min. (when humidity high) resistance 90% to 95% 100Mø min. (when dry) 8.W aterproof While mated with corresponding or protective cap No water penetration inside. performance submerged at depth of 1m for half hour. Material / Finish Assembly Component Material Finish Remarks PPS Black UL94V-0 Insulator PBT Black UL94V-0 Polyacetal Natural ---------- Silicone rubber, chloroprene Plug Gasket Red/Black ---------- rubber Brass, phosphor bronze, Contacts Gold plated ---------- Copper compound metal Spring Stainless steel ---------- ---------- Insulator PPS Black UL94V-0 Gasket Chloroprene rubber Black ---------- Brass, phosphor bronze, Receptacles Contacts Gold plated ---------- Copper compound metal Hexagonal nut Zinc alloy Chromate ---------- Washer Phosphor bronze Nickel plated ---------- Crimp contact Contacts Phosphor bronze Selective gold plated ---------- (male/female) Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. HR30 - 6 P A - 6 S C (* *) q w e r t y u i q Model name : HR30 t Number of Contacts : 3, 6, 10 and 12 w Shell size : Outside diameter/plug mating side y Contact type S : Female contact e Connector type : P : Plug P : Male contact Connector type : R : Receptacle u Contact wiring type Connector type : J : Jack Blank : Solder r Variation C : Crimping Blank : Standard D : Through hole A : Fine wire i Other specifications: B : Over mold type A two-digit character is added to indicate other specifications as needed. 2 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

HR30 Series●Miniature Waterproof Plastic Connectors Plugs Solder Type HR30-6P-6S (31) A(Fully tightened) Applicable cable diameter 6 1 5 2 4 3 (Representative example) Part No. HRS No. A B Applicable cable diameter range Solder pot inner diameter Weight HR30-6P-3S(31) 130-0004-1 31 1.1 mm 29.8 HR30-6P-6S(31) 130-0010-4 31 4.2 to 5 0.8 mm HR30-6P-6P(31) 130-0009-5 31 30.3 12.6 4g HR30-6PA-3S(71) 130-0021-0 71 1.1 mm 29.8 HR30-6PA-6S(71) 130-0019-9 71 3.5 to 4.3 0.8 mm HR30-6PA-6P(71) 130-0020-8 71 30.3 HR30-7P-12S(71) 130-0027-7 71 39.8 15.5 6.2 to 7 0.6 mm 6.7g HR30-8P-12P(71) 130-0026-4 71 Crimp Type HR30-7P-12SC (71) A(Fully tightened) Applicable cable diameter Shown with contacts installed. (Representative example) Part No. HRS No. A Applicable cable diameter range Crimp contact Weight HR30-7P-10SC(71) 130-0013-2 71 HR30-SC-211 HR30-7P-12SC(71) 130-0014-5 71 39.8 6.2 to 7 6g HR30-8P-12PC(71) 130-0015-8 71 HR30-PC-211 3 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. B Ø15.5

HR30 Series●Miniature Waterproof Plastic Connectors Plug for overmolds Solder Type HR30-6PB-6S A Part No. HRS No. A B C Solder pot inner diameter Weight HR30-6PB-3S 130-0034-2 1.1 mm 3.1g 22.7 HR30-6PB-6S 130-0032-7 12.6 5.2 0.8 mm 2.9g HR30-6PB-6P 130-0037-0 23.2 HR30-7PB-12S 130-0035-5 4.7g 25.9 15.5 6.4 0.6 mm HR30-8PB-12P 130-0030-1 4.5g Crimp Type HR30-8PB-12PC 25.9 Part No. HRS No. Crimp contact Weight HR30-7PB-10SC 130-0036-8 HR30-SC-211 4.1g HR30-7PB-12SC 130-0033-0 HR30-8PB-12PC 130-0031-4 HR30-PC-211 4.3g 4 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ØC Ø6.4 ØB Ø15.5

HR30 Series●Miniature Waterproof Plastic Connectors Receptacles Solder Type HR30-6R-6P (71) A Gasket B 1 6 2 5 3 4 E(Thread) F(Hex nut) (Representative example) Part No. HRS No. A B C D E F Solder pot inner diameter Weight HR30-6R-3P(71) 130-1003-4 71 1.1mm 16 HR30-6R-6P(71) 130-1009-0 71 8.3 12 8.9 M8∞0.75 10 2g 0.8mm HR30-6R-6S(71) 130-1008-8 71 18.4 HR30-7R-12P(31) 130-1016-6 31 18.6 9.3 15 11.5 M11∞1 13 0.6mm 3.4g HR30-8R-12S(31) 130-1018-1 31 Crimp Type HR30-7R-12PC (31) 15.5 9.3 Gasket M11X1(Thread) Shown with contacts installed. (Representative example) 13(Hex nut) Part No. HRS No. Crimp contact Weight HR30-7R-10PC(31) 130-1012-5 31 HR30-PC-211 HR30-7R-12PC(31) 130-1013-8 31 3g HR30-8R-12SC(31) 130-1014-0 31 HR30-SC-211 Through hole Type A HR30-8R-12SD (31) B 2 Through hole post (0.2∞0.5) E F(Hex nut) (Representative example) Gasket Part No. HRS No. A B C D E F Weight HR30-6R-6PD(71) 130-1020-3 71 14.9 8.3 12 8.9 M8∞0.75 10 2g HR30-6R-6SD(71) 130-1021-6 71 15.2 HR30-7R-12PD(31) 130-1017-9 31 16 9.3 15 11.5 M11∞1 13 3.4g HR30-8R-12SD(31) 130-1019-4 31 5 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Ø15 C C D Ø11.5 D

HR30 Series●Miniature Waterproof Plastic Connectors Jacks Solder Type HR30-6J-6P (31) B(Fully tightened) Applicable cable diameter 1 6 2 5 3 4 (Representative example) Part No. HRS No. A B Applicable cable diameter range Solder pot inner diameter Weight HR30-6J-6P(31) 130-2009-6 31 4.2 to 5 12 28.8 0.8 mm 3g HR30-6JA-6P(71) 130-2018-7 71 3.5 to 4.3 HR30-7J-12P(71) 130-2020-9 71 5.7g 15 37.3 6.2 to 7 0.6 mm HR30-8J-12S(71) 130-2019-0 71 5.9g Crimp Type HR30-7J-12PC (71) 37.3 (Fully tightened) Applicable cable diameter Shown with contacts installed. (Representative example) Part No. HRS No. Applicable cable diameter range Crimp contact Weight HR30-7J-10PC(71) 130-2015-9 71 HR30-PC-211 HR30-7J-12PC(71) 130-2017-4 71 6.2 to 7 5g HR30-8J-12SC(71) 130-2016-1 71 HR30-SC-211 6 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. A Ø15

HR30 Series●Miniature Waterproof Plastic Connectors Jack for overmolds Solder Type HR30-6JB-6P B Part No. HRS No. A B C Solder pot inner diameter Weight HR30-6JB-3P 130-2029-0 12.7 1.1mm 2.3g HR30-6JB-6P 130-2021-1 12 21.7 5.2 2.2g 0.8mm HR30-6JB-6S 130-2028-0 12.7 2.3g HR30-7JB-12P 130-2023-7 3.6g 15 23.7 6.4 0.6mm HR30-8JB-12S 130-2024-0 4.1g Crimp Type HR30-8JB-12SC 23.7 Part No. HRS No. Crimp contact Weight HR30-7JB-10PC 130-2025-2 HR30-PC-211 HR30-7JB-12PC 130-2022-4 3.1g HR30-8JB-12SC 130-2026-5 HR30-SC-211 7 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. A Ø15 C Ø6.4

HR30 Series●Miniature Waterproof Plastic Connectors Caps For Plugs HR30-6P-C (31) ØD ØE (Representative example) Part No. HRS No. A B C D E Applicable cable diameter Weight HR30-6P-C(31) 130-3000-7 31 13 8.4 8.9 4 8.8 Ø4.2 to 5 1g HR30-7P-C(31) 130-3004-8 31 16 10.4 10.5 6 11.4 Ø6.2 to 7 2g HR30-8P-C(31) 130-3003-5 31 For Receptacle HR30-6R-C (31) ØE ØD (Representative example) Part No. HRS No. A B C D E Remarks Weight HR30-6R-C(31) 130-3001-0 31 12.6 11.8 7.5 12.1 9.1 This cap fi ts each size of 1g HR30-7R-C(31) 130-3002-2 31 15.5 14.8 8.5 15 12.1 the HR30-7R and HR30-8R receptacles Note : When using these caps, do not use the gasket that is normally supplied with the receptacle. The “B” diameter end of the receptacle cap will serve as the gasket. 8 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. C ØA ØA C 0.9 1.4 1 1.4 ØB ØB

HR30 Series●Miniature Waterproof Plastic Connectors Crimp Contacts Male contact Female contact 1.2 1.2 A A A A 11 A-A cross-section 11 A-A cross-section (Representative example) (Representative example) Packaging Packaging Type Part No. HRS No. Weight Type Part No. HRS No. Weight type type Loose contact HR30-PC-111 130-0022-3 100pcs/pack 0.03g/1 pin Loose contact HR30-SC-111 130-0023-6 100pcs/pack 0.03g/1 pin Reel contact HR30-PC-211 130-0016-0 10,000pcs/reel 0.03g/1 pin Reel contact HR30-SC-211 130-0017-3 10,000pcs/reel 0.03g/1 pin Note : Use wire size 26 to 30 AWG with a jacket diameter of 1 mm max. Diagrams of Connectors in Combination Plugs Receptacles HR30-*P-**(71) HR30-*R-**(71) Jacks HR30-*J-**(71) Caps for Receptacle Caps for Plug HR30-*R-C(71) HR30-*P-C(71) Note 1 : P lease use connectors with compatible shell size and number of contacts. If you are using a male contact plug, please also use a corresponding product with a female receptacle and a jack. Note 2 : P lease install the applicable crimping contacts when using the crimping style connectors. (Please refer to the manual for wiring work.) Note 3 : W hen using the cap on the receptacle side, do not use the gasket that is normally supplied with the receptacle. The Hirose cap has the necessary gasket as part of the cap unit. Cap mounting diagram Panel Cable Cap Cap 9 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 0.82 1.15 0.82 1.15

HR30 Series●Miniature Waterproof Plastic Connectors Applicable Tools Cable Assembly Tools Part No. Applicable Connectors HRS No. Shell size Connector type No. of contacts Contact type HR30-6P-3S-T01 150-0220-1 3 Female HR30-6P-6S-T01 150-0214-9 6 Plug Female 6 HR30-6P-6P-T01 150-0221-4 Male HR30-7P-10SC-T01 150-0228-3 10 Female 7 Plug HR30-7P-12SC-T01 150-0223-0 12 Female HR30-8P-12PC-T01 150-0227-0 8 Plug 12 Male HR30-6R-3P-T01 150-0225-5 3 Male Receptacle HR30-6R-6P-T01 150-0218-0 6 Male Jack 6 HR30-6R-6S-T01 150-0222-7 Female HR30-7J-10PC-T01 150-0231-8 10 Male 7 Receptacle HR30-7J-12PC-T01 150-0230-5 Male Jack 12 HR30-8J-12SC-T01 150-0226-8 8 Female Note : Wiring for soldering or disassembly and assembly of plugs and jacks can be accomplished more effi ciently when using the cable assembly tool. Tightening collar for back shell Part No. HRS No. Applicable Connectors HR30-6P-T02 150-0216-4 3 and 6 contacts HR30-8P-T02 150-0224-2 10 and 12 contacts Note : The code ring tightening collar is used to tighten the cord ring to the specifi ed torque. (Please refer to the manual for assembly procedures.) Solder termination fixture Back shell tightening collar HR30-6P-6S-T01 HR30-6R-6P-T01 HR30-6P-T02 10 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

HR30 Series●Miniature Waterproof Plastic Connectors Applicable Tools Type Description Part No. HRS No. Applicable contact Applicable wire HR30-SC-111 Manual Manual crimping tool HT-102/HR30-1 150-0229-6 AWG26 to 30 HR30-PC-111 Automatic crimping machine CM-105C 901-0001-0 –––––– –––––– Automatic HR30-SC-211 Applicator AP105-HR30-1 901-2015-9 AWG26 to 30 HR30-PC-211 HR30-SC-111 –––––– HR30-SC-211 Extraction tool HR30-TP 150-0219-2 HR30-PC-111 –––––– HR30-PC-211 Manual contact crimping tool HT-102/HR30-1 Automatic contact crimping machine CM-105C Contact extraction tool HR30-TP Receptacle, Board Mounting Through Hole Pattern 2.16 2.16 2.16 2.16 0.9 0.9 6-Ø0.65 0.9 0.9 6-Ø0.65 1.44 1.44 1.44 1.44 12-Ø0.65 12-Ø0.65 1 6 5 1 3 1 1 3 2 5 6 7 4 4 7 4 2 10 8 8 10 3 4 3 12 11 11 12 0.9 0.9 0.72 0.72 0.72 0.72 1.81.8 1.52 1.52 6R-6PD 6R-6SD 7R-12PD 8R-12SD Remark : 1.T he receptacle through hole confi guration depicts a view from the mating side of the connector. 2.The above Δ mark indicates the guide key position. 3.The recommended board maximum thickness :1.2mm. 4. Tolerance of +0.03mm is recommended for the plated through hole location. Tolerance of +0.02mm is recommended for the plated through hole diameter. Contact Position Arrangement Panel Cutout Alignment mark Alignment mark A+0.05 0 1 6 5 1 1 3 2 5 64 2 2 3 4 3 HR30-6P-3S(**) HR30-6P-6S(**) HR30-6P-6P(**) ØC + 00 .05 3 2 1 3 2 1 1 2 3 7 6 5 4 4 5 6 7 7 6 5 4 10 9 8 8 9 10 10 9 8 Panel 12 11 11 12 A B C D Thishness HR30-7P-10SC(**) HR30-7P-12SC(**) HR30-8P-12PC(**) 3,6 pos. 1.25 6.45 8.05 3.95 0.7 to 2 10,12 pos. 1.35 9.25 11.05 5.45 0.7 to 3 Remarks : 1. The contact arrangement depicts a view from the wiring side. 2. I nstallation is accomplished by securing the receptacle from the back side of the panel using the supplied hexagon nut. The tightening torque of the hexagon nut should be 0.5 N·m for 3, 6 contacts, and 0.8 N·m for 10, 12 contacts. In addition, in order to prevent loosening, please apply Locktight 263 and Lockprimer 7649 manufactured by Henkel Japan Ltd., Tokyo. 11 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.56 1.56 0.49 1.6 1.35 0.87 0.48 B +0.05 0 2.22 1.83 D+0.05 0 0.87 0.48 2.22 1.83

HR30 Series●Miniature Waterproof Plastic Connectors Assembly Procedures Plug Assembly Sequence Push/pull locking collar Seal bushing Insulator/contact assembly Back shell Spring Strain relief A B Cable 1 A B Solder type : 3 and 6 Contacts. 2mm 5.5mm max. Solder type : 12 Contacts. 2mm 10mm max. Crimp type : 10 and 12 Contacts. 2 -0-0.5mm 15 to 20mm Insert the cable in the following order : 1. Back shell, 2. cord clamp, 3. gasket, 4, spring and 5. locking collar. Prepare the cable end according to the dimensions shown in Table 1. Note : When preparing the cable, use caution not to damage the insulation and conductors of the lead wires. Block end face Insulator/contact assembly Solder termination fixture Solder type 2 Fix the P case block on the cable termination tool, and after preliminary soldering, solder for 3 to 4 seconds with the soldering iron at 350±10ç. Note 1 : T ake care to avoid creating cold solder joints and solder joints with voids or air holes in it. Also check to make sure the solder joint is adequately fused between the lead wires and solder cup. Note 2 : The P case block is a precision unit. Please use caution when soldering the P case block so it does not become damaged. Any damage could result in loss of the waterproof performance. Crimp type After crimping the appropriate contact to the cable lead wire, insert the terminated wire into the correct contact position on the P case block. Note : A fter inserting the crimping wire/contact, slightly pull the lead wire and check if the crimping contact is properly seated into the P case block. 12 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

HR30 Series●Miniature Waterproof Plastic Connectors Fixation Cable Push/pull Back shell Cable locking collar Guide keys Tightening collar for back shell A (Refer to Table-2) Plug insulator body Solder termination fixture Cable View A (2:1) 3 Groove - sealing bushing Front edge of cable jacket Fig.B Fig.C Table-2 Connector Back shell tightening collar size Torque 3 and 6 Contacts. 16mm 0.5N.m 10 and 12 Contacts. 18mm 0.5N.m Insert the cable by fitting the coupling guide to the wire-connected P case block. Then, pass the cable through and assemble in the following order: 1. spring, gasket, 2 cord clamp, and 3. cord tube. Make sure when assembling it with the cord clamp and cord tube, to maintain the positional relations between the cable sheath end face and the concave area of the gasket as shown in Fig.B. Note : Please install the cord tube using the cord tube tightening tool with the cord ring tightening torque shown in Table-2. ln addition, in order to prevent loosening, please apply Locktight 263 and Lockprimer 7649 manufactured by Henkel Japan Ltd., Tokyo. When screwing in the cord tube, use your hand to hold the cable so that the cable will not rotate or twist and apply stress to the soldered wires. However, as the cable tends to be twisted slightly (just over one rotation), we recommend that you twist it in the opposite direction in advance. 13 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

HR30 Series●Miniature Waterproof Plastic Connectors Points to note when using Heat shrink tubing We recommend that you use shrink tubing over the solder connections in order to protect the soldered wires and to enhance insulation. However, please be careful when applying heat in this area when installing the shrink tube so excess heat does not bleed into or affect the resin parts as shown in the figure below. If the product does become heated beyond the area shown and into the resin parts, please make sure to prevent the following. qD eformation of the C ring. This could result in prevention of locking during mating. w Melting of some parts. To prevent the deformation of the C rings of the receptacles and the jack, we recommend heat to be applied after mating with a compatible plug. Before heating, please mate the plug in the receptacle securely, then pull the back shell for checking whether it is locked properly. If it is heated with semi-fitting, C ring may be thermally deformed with shrinking condition and it may not be locked properly. C ring Receptacle Shrinkable tube Heat application area Mated dimensions Compatible plug Receptacle Back shell Heat application area 14 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

HR30 Series●Miniature Waterproof Plastic Connectors General usage notes 1. Mating 2. Un-mating Mounting panel Receptacle Cable D Plug Mounting panel C Push/pull locking collar Cable A Alignment marks D B C When mounting, smooth mating will be achieved by holding When removing the plug from its connected condition, hold plug in any are “A” and aligning the arrow of the plug with the plug by push/pull locking collar (area “B”) and pull that of the receptacle, then pushing the plug straight in. straight off. Precautions 1. Make sure the power is off before mating or un-mating the connector. 2. When mating the connector, push it on with a force of a least 30N. After mating, pull slightly on the connector to check for proper mating and to ensure the connector is fi rmly locked to the receptacle. 3. A fter mating the connector, do not apply a force over 30N to the cable in the directions shown by the arrows. An excessive load can lead to connector damage. 30N max. Panel 30N max. 30N max. 4. To maintain the waterproof performance, cable clamping force and cable stability, please use a cable within the recommended for cable diameters. Because the performance will differ depending on the cable structure, make sure to check all specifi cations of the cable assembly before use or production. 5. Please assemble and install the connector and components with the specifi ed tightening torque. If the tightening torque is too weak or too strong, loosening or breakage can occur. 6. Please contact Hirose if your application requires compliance with the Electrical Appliance and Meterial Safety Act. 7. Please note that the white label on the connector may come off due to solvents such as alcohol. 15 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

HR30 Series●Miniature Waterproof Plastic Connectors USA: USA: USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 2300 Warrenville Road, Suite 150, 2841 Junction Ave, Suite 200 17197 N. Laurel Park Drive, Suite 253, Downers Grove, IL 60515 San Jose, CA. 95134 Livonia, MI 48152 Phone : +1-630-282-6700 Phone : +1-408-253-9640 Phone : +1-734-542-9963 http://www.hirose.com/us/ Fax : +1-408-253-9641 Fax : +1-734-542-9964 http://www.hirose.com/us/ http://www.hirose.com/us/ USA: THE NETHERLANDS: GERMANY: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE HIROSE ELECTRIC EUROPE B.V. HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH 300 Brickstone Square Suite 201, Hogehillweg #8 1101 CC Amsterdam Z-O Schoenbergstr. 20, 73760 ostfildern Andover, MA 01810 Phone : +31-20-6557460 Phone : +49-711-456002-1 Phone : +1-978-662-5255 Fax : +31-20-6557469 Fax : +49-711-456002-299 http://www.hirose.com/eu/ http://www.hirose.com/eu/ GERMANY: GERMANY: FRANCE: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Bayernstr. 3, Haus C 30855 Langenhagen, Germany 130 Avenue Joseph Kessel, Bat E, 78960 Phone : +49-911 32 68 89 63 Phone : +49-511 97 82 61 30 Voisins le Bretonneux, France Fax : +49-911 32 68 89 69 Fax : +49-511 97 82 61 35 Phone : +33-1-85764886 http://www.hirose.com/eu/ http://www.hirose.com/eu/ Fax : +33-1-85764823 http://www.hirose.com/eu/ UNITED KINGDOM: CHINA: CHINA: HIROSE ELECTRIC EUROPE BV (UK BRANCH) HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS) HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH 4 Newton Court, Kelvin Drive, Knowlhill, 18, Enterprise Center Tower 2, 209# Gong He A1001, Ocean International Center, Building 56# East 4th Milton Keynes, MK5 8NH Road, Jing’an District, Shanghai, CHINA 200070 Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +44-1908 202050 Phone : +86-21-6391-3355 Phone : +86-10-5165-9332 Fax : +44-1908 202058 Fax : +86-21-6391-3335 Fax : +86-10-5908-1381 http://www.hirose.com/eu/ http://www.hirose.com/cn/ http://www.hirose.com/cn/ CHINA: HONG KONG: TAIWAN: HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377 Phone : +86-755-8207-0851 Phone : +852-2803-5338 Fax : +886-2-2555-7355 Fax : +86-755-8207-0873 Fax : +852-2591-6560 http://www.hirose.com/tw/ http://www.hirose.com/cn/ http://www.hirose.com/hk/ KOREA: SINGAPORE: INDIA: HIROSE KOREA CO.,LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE 143, Gongdan 1-daero, Siheung-si, 03, Anson Road, #20-01, Springleaf Tower, Office NO.552, Regus-Green Boulevard, Level5, Tower C, Gyeonggi-do, 15084, Korea Singapore 079909 Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +82-31-496-7000 Phone : +65-6324-6113 Phone : +91-12-660-8018 Fax : +82-31-496-7100 Fax : +65-6324-6123 Fax : +91-120-4804949 http://www.hirose.co.kr/ http://www.hirose.com/sg/ http://www.hirose.com/sg/ INDIA: MALAYSIA: THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Lepas Penang, 11950, Malaysia Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +91-80-4120 1907 Phone : +604-648-5536 Phone : +66-2-686-1255 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ Fax : +66-2-686-3433 http://www.hirose.com/sg/ http://www.hirose.com/sg/ ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 16 The contents of this catalog are current as of date of 09/2020. Contents are subject to change without notice for the purpose of improvements. Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.