SCREWDRIVING
AND FASTENING
SYSTEMS WITH
AUTOMATIC FEEDING
BMS
Fully automatic setting unit
for blind rivet nuts with
patented quality control
Our setting system with force-displacement
measurement for the automatic installation THE ADVANTAGES AT ONE GLANCE:
of blind rivet nuts and blind rivet bolts con- h The patented torque test checks the secure
fitting of the rivet after drawing.
vince thanks to their versatility, performance
h The functionality of the thread is tested for
level and short cycle time of 5 seconds.
ease of movement both when winding in
The compact design with a closed housing and winding out. Rivets that are detected
to protect against dust and the quick tool as faulty when winding in are automatically
change underline our commitment to eco- ejected and replaced. An error message
nomic feasibility. The automated process is issued for threads that are detected as
faulty when winding out.
for setting blind rivet nuts is 100 percent
h The search function for the hexagonal blind
monitored. The system can be used in a rivet nuts facilitates precise positioning in
stationary setting, in transfer systems, the workpiece.
rotary table systems or robot systems. The h Breakage of the drawing tool is
blind rivet nuts are singulated in a feeder immediately detected by the system and
system as bulk materials and automatically reported.
fed into the correct position via a flexible h The drawing tool is a commercially
available standard screw; there is no
feed hose in relation to the setting unit. need for expensive spare parts
h The drawing tool can be changed within
just 10 seconds without the need for any
auxiliary tools
h Automatic feeding of the fastening elements
Technical data
BMS 6252 BMS 6600
Size M5-M10* M5-M14*
Feed stroke 125 mm 125 mm
Drawing force 25 kN 60 kN
Weight 31.5 kg approx. 65 kg
* Standard; other sizes possible
Modules
BMS 6252 BMS 6600
Length ........................................................................... (A) 860 1185
Distance of drawing tool to lower edge approx. approx.
installation plate ....................................................... (B) 50 45
Total feed stroke ....................................................... (C) approx. approx.
125 125 1 Servo drive (for drawing tool)
Setting axle protection ........................................... (D) 180 180 2 Servo drive (for turning)
3 Installation plate
Distance of drawing tool – installation plate ... (E) 53.5 70
4 Integrated load cell
Installation plate width ........................................... (F) 180 215 5 Loading device
6 Setting head with integrated stroke
Minimum distance for twin-spindle implementation 70 105 7 Drawing tool
All data in mm
Tool change functionality
Press the locking bar, pull down the support Remove the screwdriver tool sideward Insert the tool, apply support sleeve and latch
sleeve at the same time into place
CAD data available on www.stoeger.com/en/downloads.html
under file “Setting & riveting”
STÖGER AUTOMATION GmbH Phone: +49 8179 997 67-0
Gewerbering am Brand 1 info@stoeger.com
82549 Königsdorf www.stoeger.com
Stand 11/2017
