実験研究用圧力センサ

123 RUGGEDIZED AUTOMOTIVE PRESSURE TRANSDUCERS XTL-123B-190 (M) SERIES • Easy Installation • High Natural Frequency • 10-32 UNF or M 5 x .8 Thread • Wide Temperature Range • Compatible With Most Automotive Fluids • Patented Leadless Technology VIS® Kulite recommends the KSC-2 signal conditioner to maximize the measurement capability of the XTL-123B-190 transducer. .845 (21.5) .15 .312 HEX. (3.8) (7.9) .375 (9.5) .14 (3.5) REFERENCE TUBE GAGE AND DIFFERENTIAL ONLY .15 (3.8) .016 DIA. (.41) .148 .312 DIA. DIA. (3.8) (7.9) “T” "M" SCREEN (STANDARD) # 26 AWG 4 COND. “B” SCREEN SHIELDED VITON CABLE (OPTIONAL) 60" (1524) LONG COLOR DESIGNATION RED + INPUT O - RING .189 (4.8)I.D. x .039 (.99) C.S. P/N "T" BLACK - INPUT MATERIAL: VITON GREEN + OUTPUT 190 10-32 UNF-2A WHITE - OUTPUT 190M M 5 x .8 1.0 1.7 3.5 7 17 35 70 100 210 BAR Pressure Range 15 25 50 100 250 500 1000 1500 3000 PSI Absolute, Operational Mode Gage, Absolute, Sealed Gage, Gage, Differential Absolute, Sealed Gage Differential Over Pressure 2 Times Rated Pressure to a Maximum of 4500 PSI (315 BAR) Burst Pressure 3 Times Rated Pressure to a Maximum of 4500 PSI (315 BAR) Pressure Media Most Liquids and Gases - Please Consult Factory (All Media May Not Be Suitable with O-Ring Supplied) Rated Electrical Excitation 10 VDC Maximum Electrical Excitation 12 VDC Input Impedance 1000 Ohms (Min.), 5000 Ohms (Max.) Output Impedance 2000 Ohms (Max.) Full Scale Output (FSO) 100 mV ± 10 mV Residual Unbalance ± 5mV (Typ.) Combined Non-Linearity, Hysteresis and Repeatability ± 0.1% FSO BFSL (Typ.), ± 0.5% FSO (Max.) Resolution Infinitesimal Natural Frequency of Sensor Without Screen (KHz) (Typ.) Greater Than 175 KHz Acceleration Sensitivity % FS/g Perpendicular 6.5x10-4 5.0x10-4 3.0x10-4 1.5x10-4 1.0x10-4 6.0x10-5 4.5x10-5 3.5x10-5 2.0x10-5 Insulation Resistance 100 Megohm Min. @ 50 VDC Operating Temperature Range -40°F to +400°F (-40°C to +204°C) Compensated Temperature Range -40°F to +350°F (-40°C to +175°C) Thermal Zero Shift ± 1% FS/100°F (Typ.) Thermal Sensitivity Shift ± 1% /100°F (Typ.) Linear Vibration 10-2,000 Hz Sine, 100g. (Max.) Humidity 100% Relative Humidity Mechanical Shock 20g half Sine Wave 11 msec. Duration Electrical Connection 4 Conductor 26 AWG Shielded Viton Cable 60" Long Weight 5 Grams (Nom.) Excluding Cable Pressure Sensing Principle Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon Patented Leadless Technology Mounting Torque 15 Inch-Pounds Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (W) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2014 Kulite Semiconductor Products, Inc. All Rights Reserved. Kulite miniature pressure transducers are intended for use in test and research and development programs and are not necessarily designed to be used in production applications. For products designed to be used in production programs, please consult the factory. KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kulite.com PHYSICAL ENVIRONMENTAL OUTPUT INPUT