総合カタログ（英文）

Products Parallel Monitoring Board　SVP-01-U Parallel Image Generator　SVP-01-G Overview Overview SVP-01-U is a parallel image capture board for displaying and SVP-01-G is a parallel image generator board for converting video recording video signals of the parallel interface. This board can signals input via USB3.0 or DisplayPort to parallel interface. output signals to DisplayPort or USB3.0 (UVC/PC). Output timing such as blanking area and frame rate can be set as desired for flexible camera emulation. SV Characteristics Characteristics Support parallel input up to 24bit 150MHz Support parallel output up to 24bit 150MHz series Output to USB3.0 (UVC) or DisplayPort Input from USB3.0 (Vendor Class Driver) or DisplayPort Compatible with parallel output deserializer Compatible with parallel input serializer MIPI Monitoring Board　SVM-06 MIPI Signal Generator　SVO-03-MIPI Overview Overview SVM-06 is a MIPI image capture board for displaying and recording SVO-03-MIPI is a MIPI signal generator board for converting video video signals of the MIPI interface. This board can output signals signals input via USB3.0 or HDMI to MIPI interface. to HDMI monitors and USB 3.0 (UVC/PC). Output timing such as blanking area and frame rate can be set as desired for flexible camera emulation. Characteristics Characteristics Support MIPI CSI-2 up to 1.5Gbps/lane Support MIPI CSI-2 up to 950Mbps/lane Support Embedded Data Capturing Input from USB 3.0 (Vendor Class Driver) or DisplayPort Simultaneous output to USB 3.0 (UVC) and DisplayPort Compatible with MIPI CSI-2 input serializer Compatible with MIPI CSI-2 output deserializer Image Recorder　SVP-01-V Option Boards　※build-to-order Serializer Board ＊GMSL2、FPD-LinkⅢ、GVIF2 etc. Overview SVP-01-V is a parallel signal recorder board for converting video Deserializer Board ＊GMSL2、FPD-LinkⅢ、GVIF2 etc. signals from the parallel interface to USB3.0 (Vendor Class)/PC. GW5 Series Development Board： GW5 Board This board can also output video to DisplayPort monitors. Connection Board for Jetson nano： NV011-D Connection Board for OmniVision MIPI Image Sensors： NV011-V Characteristics Support up to 24-bit video signal recording and 16-bit general parallel signal capturing Output to USB3.0 (Vendor Class Driver) or DisplayPort (Video signal only) Best suited for user custom solutions GMSL Deserializer Board GW5 Board NetVision 3-8-6, KandaKaji-cho, Chiyoda-ku, Tokyo, 101-0045, Japan Tel : +81-3-5577-5662 Mail : sv-support@net-vision.co.jp 2023.03.

CASE 1 CASE 3 5.4MP GMSL2 Camera + GEO Semiconductor GW5410 Output GMSL Camera Image Output to HDMI Monitor/Recorder MIPI CSI-2 Virtual Channel Simultaneous Capturing Parallel Monitoring Board SVP-01-U can output automotive camera images such as GMSL, Using MIPI Monitoring Board SVM-06 with IMX490 and GW5410 allows to display both RAW FPD-LinkⅢ to HDMI or USB3.0 by using with our deserializer boards. As shown below, GMSL video and YUV video. Multiple daisy-chain-connected SVM-06 can capture any virtual camera images are displayed on an HDMI monitor and NINJA2 (HDMI recorder) without a PC. channel stream selectively and simultaneously. With I2C auto-setting function for an image sensor and a deserializer, Two SVM-06 capture RAW(VC0) and YUV(VC1) respectively. camera images can be displayed just by turning on the power. Power supply for the camera is connected to the GW5 board. FT4222 module enables GEO apps to access GW5410. 6V DP→HDMI 12V Active Repeater HDMI GMSL2 Cable Cable Deserializer Board + GW5 Board HDMI GMSL Splitter Camera Module Monitor HDMI 5V Cable USB AC GMSL2 Adapter Camera Module USB Cable Data Input to GMSL + SVP-01-U NINJA2 RAW Image Deserializer Board (HDMI Recorder) PC (VC0) via USB 3.0 SVP-01-U can capture various camera images by changing the initial settings file and the MIPI deserializer board. It can also be used as a logger of automotive camera images while driving. Splitter Board + SVM-06 I2C control is supported with an application when connected with a PC, allowing sensor/SerDes register to read/write easily . It makes ideal as a camera inspection jig. Side View Deserializer Board MIPI GW5 Board MIPI Splitter Board Splitter CASE 2 SVM-06 USB Cable Raspberry Pi Camera Emulation Board YUV Image SVO-03-MIPI + Jetson Nano Video Input (VC1) MIPI Generator SVO-03-MIPI can input video to Jetson Nano instead of a Raspberry Pi camera and check the video on a monitor connected to Jetson Nano. The GW5410 outputs RAW12 and YUV422 8bit data together. You will find that the board can be used universally as a video source in place of a MIPI camera. Each video is 2880x1860, 30fps and both of RAW and YUV are displayed on one PC. Uncompressed AVI file is supported as a video source. Video streamer application is provided free of charge. 【About MIPI Signal Split】 MIPI MIPI Decoder Decode Data Camera Emulation Part MIPI MIPI Encoder USB3.0 MIPI HDMI MIPI Cross Link • SVM-06 can duplicate the MIPI signal in combination with PC SVO-03-MIPI Jetson™ nano MIPI Decoder and Encoder. Monitor UVC • Daisy-chain connection can support not only 2 units but also 3 units or more. SVO-03-MIPI can emulate a camera. • No data loss in MIPI Short / Long packets allows each board You can use it as an alternative video source for debugging the ISP and the ECU, etc. to selectively capture virtual channels and Enbedded Data.