1/36ページ
カタログの表紙 カタログの表紙 カタログの表紙
カタログの表紙

このカタログをダウンロードして
すべてを見る

ダウンロード(7.5Mb)

O&M HEATER 総合カタログ

製品カタログ

シリコーンラバーヒーターを中心とした関連製品総合カタログ

シリコンラバーヒーターの基本情報から用途事例、各種ラインナップ、会社情報すべてが盛り込まれた総合カタログです。これをダウンロードすればほぼすべてがわかります。

<INDEX>
・シリコーンラバーヒーターとは...?
・ヒーター応用例
・標準価格表
・温度調節器
・その他製品
・環境方針
・基本工程
・所要熱量計算
・会社概要・沿革

詳細はダウンロードの上、ご確認ください。

関連メディア

このカタログについて

ドキュメント名 O&M HEATER 総合カタログ
ドキュメント種別 製品カタログ
ファイルサイズ 7.5Mb
登録カテゴリ
取り扱い企業 オーエムヒーター株式会社 (この企業の取り扱いカタログ一覧)

この企業の関連カタログ

この企業の関連カタログの表紙
温度調節器とその他製品
製品カタログ

オーエムヒーター株式会社

この企業の関連カタログの表紙
P&F ヒーター
製品カタログ

オーエムヒーター株式会社

この企業の関連カタログの表紙
温度調節器 EGO
製品カタログ

オーエムヒーター株式会社

このカタログの内容

Page1

柔軟な思考で、明日を築く- Flexible ideas create a better future https://www.om-heater.jp NEW PRODUCT・SILICONE RUBBER HEATER・TEMPERATURE CONTROLLER・OTHERS お問い合わせ・ご注文はフリーダイヤルをご利用下さい。 0120-800-255 「EN9100」 を認証取得いたしました。 オーエムヒーター株式会社は国際的に認められた、航空宇宙産業品質マネジメントシステムである「EN9100」 を認証取得いたしました。(米国では「AS」日本では「JIS Q」)シリコーンラバーヒーターの製造販売にあたり、 当社は、新規技術の研究開発に積極的に取り組み、常に環境に配慮した事業活動を展開し、より高品質で付加 価値の高い製品及びサービスをご提供することでお客様の信頼に応えていきたいと考えております。 「ISO9001」・「ISO14001」認証取得 「EN9100」認証取得 2023.09
Page2

MAP 至春日井 メーカーだからできた 1枚からのイージーオーダー 星ヶ丘 一社 上社 地下鉄東山線 上社IC 至名古屋 至名古屋IC 至今池 至本山 天白川大橋南 植 天 この度は、弊社広告に早速のお問い合わせ有り難うございました。 田 白 302 川 川 中 名 第 植原橋東 原 1北 弊社で製造しております O&Mシリコーンラバーヒーターのご案内をさせて 京 城 一 地下鉄 大 大 楽 1番 学 学 器 戴きたく、カタログを同封致しました。 ヤ 出口 マ 植田駅 最高温度に制約が有る事が(250℃)最大の欠点でありますが、従来の金属性 ハ 原駅 地下鉄鶴舞線 塩釜口駅 原 1 のヒーターとは異なった数々の特性を有しております。又、特性の柔軟性 153 56 故に金属性ヒーターでは考えられなかった場所への使用も可能になるものと 至吹上IC 中道 八事 植田西 天白橋東 平針西口 至平針・豊田 天 考えており、ヒーターのイメージを大幅に変え得るものと確信しております。 白 警 察 飯田街道 本製品の特性をご活用戴き、貴社製品及び生産行程の中にご採用戴ければと 署 平針 5北 切望いたしておりますので、宜しくご検討の程お願い申し上げます。 59 弊社と致しましては、論より証拠、ご使用戴くのが先決と考えており、試作 島田 221 品を短納期でご納品できる態勢でおりますので、数量、形状の大小に拘らず ご用命ください。 至新瑞 至鳴海 至緑区 This catalogue provides information about our entire line of O&M Silicone ■本 社 〒468-0015 名古屋市天白区原 1丁目 601番地 Rubber Heaters. Rubber heaters possess many useful properties which are         TEL(052)804-3140 FAX(052)804 -3146 O&M HEATER CO.,LTD. lacking in metallic heaters. Despite a maximum temperature of 482°F( 250℃)- ■東京営業所 〒115-0045 東京都北区赤羽1-45-3 第3サイードビル2F         TEL(03)3598-4761 FAX(03)3598-4768 its primary weakness-its characteristic flexibility allows use in many situations ■大阪営業所 〒532-0011 大阪市淀川区西中島 3丁目 12-15 where metallic heaters cannot be applied. We believe that this technology has         第 5新大阪ビル 603号 the ability to expand on the traditional uses of heating, and we hope that you         TEL(06)6100-1315 FAX(06)6100-1316 can see for yourself the advantages of our heaters by integrating them with your ■ HEAD OFFICE manufacturing processes. 1-601 HARA, TENPAKU-KU, NAGOYA 468-0015 JAPAN TEL(052)804-3140 FAX(052)804-3146 Of course, talk is cheap. Therefore, we will custom make heaters in any shape and ■ TOKYO OFFICE any quantity, even a single piece, in a short amount of time to prove the benefits of 2 F DAISAN SAIIDO BLDG., 1-45-3 AKABANE, KITA-KU this technology. TOKYO 115-0045 JAPAN TEL(03)3598-4761 FAX(03)3598-4768 ■OSAKA OFFICE 6 03 DAIGO SHIN-OSAKA BLDG., 3-12-15 NISHINAKAJIMA, YODOGAWA-KU, OSAKA 532-0011 JAPAN TEL(06)6100-1315 FAX(06)6100-1316 1002
Page3

INDEX ■O&M SILICONE RUBBER HEATER シリコーンラバーヒーターとは…? ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 What is the SILICONE RUBBER HEATER? ■ヒーター応用例 Heater Application example えっ!こんな所にO&Mヒーター・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 ■標準価格表 Standard price list ・・・・・・・・・・・・・・・・・・・・・・・・・・・10 ■シリコーンラバーヒーター SILICONE RUBBER HEATER 標準タイプ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・11 Standard Type Eタイプ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・12 E Type Hタイプ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・13 H Type MGタイプ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・14 MG Type ストレッチタイプ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・15 Stretch Type ドラム缶用ヒーター・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・16 DRUM HEATER 防滴タイプ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・18 DRIP PROOF Type スパイラル配管用ヒーター・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・19 Spiral Piping Exclusive Use Heater 立体成形 3 dimensional molded 焼付加工・組立加工・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・20 Heat Fusion Construction Process 内面接着加工 Inner Surface Adhesion Process ■温度調節器 TEMPERATURE CONTROLLER デジサーモOT-9 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・21 DIGITHERMO OT-9 デジサーモOT-9 PRO ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・22 DIGITHERMO OT-9 PRO EGO ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・23 EGO ■その他製品 OTHER PRODUCTS P&Fヒーター ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・24 P&F Heater ヒーターホース・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・25 Self Heating Hose F&Cヒーター F&C Heater ヒーター保温カバー・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・26 Heat insulation Cover バンド・プレートヒーター Band/ Plate Heater カートリッジヒーター・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・27 Cartridge Heater 自己融着シリコーンゴムテープ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・28 Self-adhesive Silicone Rubber Tape ■環境方針 Environmental Policy ・・・・・・・・・・・・・・・・・・・・・ 29 ■基本工程 Basic process ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 30 ■所要熱量計算 Quick Reference Chart ・・・・・・・・・・・・・・・ 31 ■会社概要・沿革 Company History ・・・・・・・・・・・・・・・・・・・ 32
Page4

O&M SILICONE RUBBER HEATER 素材からの取り組みと、蓄積した固有の技術が、夢をカタチにする シリコーンラバーヒーターは1965年ごろ、NASA(米国)が初めて月面に行くためのロケット開発から生まれました。当社は早くからこのヒー ターに着目し、このヒーターのもつ良さを尚一層ご利用いただくため、1枚からの製法を開発し、普及に努めております面状発熱体の専業メー カーです。材料もUL認定の米国Rogersより輸入、ご安心いただけるO&Mシリコーンラバーヒーターをよろしくお願い致します。 Since the development of the first silicone rubber flexible heaters to support NASA's Apollo Space Mission during the 1960's O&M Heater has refined and expanded the custom design and manufacture of flexible heaters. O&M holds an international patent on its proprietary process for customizing silicone rubber flexble heaters, engineered from fiberglass cloth calendared with silicone rubber and nickel alloy elements. With O&M's innovative process, flexible heaters can be made in virtually infinite configurations, sizes and shapes−with or without perforations−for a perfect fit with precise temperature control. The greatest advantage of this process is that it allows manufacturing of any quantity of heaters, from a single unit to mass production. This unique capability is not available through any other manufacturer in North America. シリコーンラバーヒーターとは…? What is the Silicone rubber heater? ❶ シリコーンラバーヒーターは従来の金属ヒーターに代わる柔軟性の ❶ Silicone rubber heaters are flexible, thin and flat, and can be ある薄形の面状発熱体です。 used in many situations where metal heaters cannot be used · 上下 2枚のガラスクロスに、シリコーンゴムをカレンダー加工した薄い 2 · Consists of two sheets of calendered silicone rubber and fiberglass 枚のシートで構成されています。 fabric. ·シ リコーンゴムシートは巾広い温度域(-50~ 250℃)に対応する事ができます。 · The silicone rubber sheet is capable of resisting wide range of temperature from -50 to 250℃[ -58°F to 482°F]. · 薄いシート状ですので熱応答性に優れています。(標準厚さ 1.5㎜) · Possesses high thermal response due to low thickness, with a · 柔軟性に優れていますので、曲面、円筒などに巻き付けるなど被加熱物に standard thickness of 1.5mm. 完全にフィットさせることができます。 · Can easily be fit on cylinders, cones, and various curved surfaces ·一 般的な面状発熱体はカーボンが主成分ですが、O&Mシリコーンラバーヒー because of its high flexibility. ターはニッケル合金抵抗線をパターン化していますので、安心してお使い ·U ses safer nickel-alloy wire elements, unlike carbon element heaters. いただけます。 ❷ Silicone rubber heaters can be designed in any shape desired ❷ヒーターの形状が自由に製作できます。 ·C an be made into any shape, from a triangle to a torus, and can be · 一般的なカーボンタイプと異なり、ニッケル合金抵抗体のパターン設計の designed with holes or other perforations, unlike carbon element heaters. ため、被加熱物の形状に合わせて丸形、三角形、穴開きなど自由に製作で · Our internationally patented process allows us to custom design きます。 even a single heater. · 独特な製造方法(製法特許)のため、1枚からでも短納期で製作できます。 ❸ We can design heaters for almost any situation you can imagine ❸ 発想を変えた熱の感覚で設計できます。新製品の開発にお役立て下 さい。 · Our heaters have been used in a wide variety of industries and facilities. · あらゆる業界に機器部品として、あるいは設備用としてご使用いただいて おります。 · Thin, flexible heaters offer a simple solution to problems of weight reduction and miniaturization. ·薄 いシート状で柔軟性があるので軽量化、小型化が可能になります。 *A thermal controller is necessary, since the heating surface is capabel of quick ※昇 heating, but lacks inherent temperature control. 温が早く自己温度制御がありません。必ずヒーターの温度制御を行ってください。 ❹標 準タイプ、Eタイプ、MGタイプ(マグネット)は、連続 200℃で ❹ T he Standard Type, E-type, and MG-type can be used continuously and semi-permanently at 200℃[392°F] 半永久的に使用できます。 · Can easily be adhered to the heated object. · 被加熱物に簡単に接着できます。 Up to 100℃[212°F]- Double sided adhesive tapes. 100℃以下のとき………両面接着テープ 100-150℃[212-302°F]- Silicone Adhesives( RTV) 100℃~150℃のとき…シリコーン接着剤(RTV) · We recommend our fusion process for cont inuous use at · 250℃以上での連続使用では、被加熱物への弊社工場での一体焼付加工を temperatures above 250℃[ 482°F]. お勧めします。 ❺ The H-type can be used continuously at 250℃[ 482°F] ❺ Hタイプ(耐熱)では、最高 250℃で使用できます。 ·W e stock 300℃ heat resistant adhesives KE3418RTV(B) manufactured ·接 着には 300℃耐熱接着剤、KE3418RTV(B)信越化学製を在庫しています。 by Shin-Etsu Chemical. 2
Page5

O&M SILICONE RUBBER HEATER O&Mシリコーンラバーヒーターの用途 Various uses for O&M Silicone Rubber Heaters タンク・パイプの保温、油タンク・ポンプの凍結防止、モーター・発電機の防 Heating for tanks and pipes, Freeze proofing for oil tanks and pumps・ 湿、紙・プラスチックのヒートシール・ラミネート機・ディスペンサー・接着 damp proofing for motors and generators・hardening for papers, plastic 剤の硬化、食品自動販売機、保温板、歯科機械、美容機器、病院の検査台、移 heat-seals, laminators, dispensers, and adhesives・Vending machines・ 動食器車、理化学機器、ホットプレート、各種寒冷地測定機械の凍結防止・保温、 Hot plates・ Dental instruments・Cosmetic instruments・Hospital 金属の溶接予熱装置、熱収縮チューブの加熱、パラボラアンテナ凍結防止、洋 examination stands・ Mobile tableware carts・Laboratory equipment・ 服プレス・合板プレスの熱板、ミサイル、航空機器の保温、航空宇宙分野、暖 Freeze proofing for measuring instruments in cold temperatures・ 房機、バーナー気化装置、セメント凍結防止、ヒーターマット、ヒーターブラ Preheating devices for welding metal ・ Heating for thermal contraction ンケット、CFRP(Carbon fiber reinforced plastics)の成形加工用。 tubes・Freeze proofing for parabolic antennas・ Hot plates for textile and plywood presses・Missiles・Heating for aviation equipment・Heaters・ Burners・Vaporizers・Freeze proofing for cement・Office appliances・ Applied to molding CFRP. ■空気中における表面温度 ■急速加熱形(Eタイプ) Surface temperature in Open Air Sudden Temperature Change アルミ1.0tに焼付 3w/cm2 2W/cm2 1.5W/cm2 1W/cm2 300 150℃温度制御(比例制御) Fused to 1.0t of aluminum, 3w/cm2 150℃ temp. control( proportional control) 250 0.9W/cm2 0.7W/cm2 150 200 0.6W/cm2 0.5W/cm2 150 0.4W/cm2 100 0.3W/cm2 100 0.15W/cm2 50 0.07W/cm2 50 0 1 2 3 4 5 10 15 30 48 60 時間(分) time( min) 時間(秒) time( sec) ※シリコーンラバーヒーター単体を常温空気中にて測定 ●ご注意 使用環境、被加熱物の材質、形状などによりヒーター表面温度は変化します。 液体中に直接投入して使用できません。しかしシリコーンゴムは撥水性が良い ので高温度状態での使用にはその性能をいかんなく発揮します。 * The above graph is the result of a single heater in normal room temperature.The actual surface temperature of heaters may vary ● NOTE:The heater cannot be put into fluid directly. However, it depending on the environment, the materials heated, and the shape of shows a good performance in high humidity, as silicone rubber is water the heated object. repellent. 3 温度(℃) temp(Degrees) 温度(℃) temp(Degrees)
Page6

え!ヒーター応用例 Heater Application example っ こんな所にO&Mヒーター ガス管樹脂コート剥離予熱ヒーター 橋脚溶接予熱用ヒーター 精米機防湿用ヒーター Preheating device to assist removal of resinous coating. Preheating device for welding used in bridge piers. Damp proofing heaters for rice-polishing machines. 鉄鋼・金属製品 Heavy Industry 鉄鋼・金属製品 Heavy Industry 一般機械器具製造業 General Machinery Manufacturer パラボラアンテナ凍結防止ヒーター ポンプ凍結防止ヒーター 集塵機ホッパー(粉体除湿用) Freeze-proofing heaters for parabolic antennas. Freeze-proofing heater for pumps. Dust collector hopper(. For powder dehumidifying) 一般機械器具製造業 General Machinery Manufacturer 一般機械器具製造業 General Machinery Manufacturer 一般機械器具製造業 General Machinery Manufacturer 機械油圧ユニット保温用ヒーター 寒冷地建設機械油圧シリンダー凍結防止ヒーター 生ゴミ処理機(有機発酵保温) Heaters for oil pressure units. Freeze-proofing heaters for hydraulic cylinders in construction equipment. Compost disposer(. Organic fermentation heating) 一般機械器具製造業 General Machinery Manufacturer 一般機械器具製造業 General Machinery Manufacturer 一般機械器具製造業 General Machinery Manufacturer 4
Page7

大型サイロ防湿保温用ヒーター セメント養生シート 各種乾燥機用ヒーター Damp proofing and heating for large silos. Freeze-proofing to protect cement from cracking. Dryers for various uses. 一般機械器具製造業 General Machinery Manufacturer 一般機械器具製造業 General Machinery Manufacturer 一般機械器具製造業 General Machinery Manufacturer 包装機フィルムカットヒーター 樹脂金型予熱用 楽器合板成型プレス用ヒーター For packaging machine film cut. Molds for plastics. Wood-shaping hot presses for musical instruments. 一般機械器具製造業 General Machinery Manufacturer 一般機械器具製造業 General Machinery Manufacturer ゴム・窯業・繊維機器 Natural Materials 織機湿度乾燥用プレートヒーター 捺染機パラフィン乾燥用熱板ヒーター 歯科機械保温水用ヒーター Heating plates for drying in cloth weaving machines. Heaters for paraffin drying in textile-dying machines. Heating water for dental instruments. ゴム・窯業・繊維機器 Natural Materials ゴム・窯業・繊維機器 Natural Materials 医療用機器 Medical Instruments 5
Page8

え Heater Application example っ!ヒーター応用例 こんな所にO&Mヒーター 洋服芯地プレス熱板用ヒーター・電気毛布製造プレス熱板用ヒーター・化粧合板プレス熱板用ヒーター ドラム缶保温用ヒーター・ヒーターホース Hot presses for textile and electric blanket manufacturing, and plywood printing. Drum and hose heaters. 一般機械器具製造業 General Machinery Manufacturer ドラム缶用ヒーターの用途 Automotive 血液検査装置 防犯カメラレンズ曇り止めヒーター Blood test apparatus. Defogger for security camera lenses. 医療用機器 Medical Instruments 電気機械器具 General Machinery Manufacturer オンデマンド・インクジェット印刷システム用ヒーター MRIスキャナー磁場安定用ヒーター On demand printing machine. Magnetic stabilizing for MRI Scanners. OA機器 General Machinery Manufacturer 医療用機器 Medical Instruments 6
Page9

液体注入ディスペンサー保温用ヒーター X線フィルム感光装置用ヒーター Heaters for liquid dispensers. Heated rollers used in X-ray film development. 精密機器 General Machinery Manufacturer 医療用機器 Medical Instruments 理科専用ホットプレートヒーター OAバインダー熱板用ヒーター Hot plate heaters for laboratory equipment. Hot plates for automatic paper binding. 理科学機器 General Machinery Manufacturer OA機器 General Machinery Manufacturer 真空配管保温用ヒーター ディスペンサー装置ノズル保温用ヒーター Temperature maintenance for vacuum pipes. Heaters for dispenser nozzle. 半導体製造装置 Semiconductors 精密機器 General Machinery Manufacturer 7
Page10

え ヒーター応用例 Heater Application example っ!こんな所にO&Mヒーター 宇宙ステーション補給機(HTV) 人工透析器 H-ll Transfer vehicle( HTV) Dialyzer. 航空宇宙機器 Aerospace Instruments 理科学機器 General Machinery Manufacturer 航空機体補修用 ウエハーレジン 加熱板用ヒーター Carbon fiber reinforced plastics repair. Heating surfaces for wafer-resins. 航空宇宙機器 Aerospace Instruments 半導体製造装置 Semiconductors CFRP成型プレス用ヒーター 溶接予熱用ヒーター Heaters for forming CFRP. Preheating device for welding. 航空宇宙機器 Aerospace Instruments 鉄鋼・金属製品 Heavy Industry 8
Page11

車両ドアプレス熱板用ヒーター 畳張り成形用ヒーター Hot presses for vehicle doors. Heater for forming straw mat 一般機械器具製造業 General Machinery Manufacturer 一般機械器具製造業 General Machinery Manufacturer 化学薬品タンク保温用ヒーター 真空貼付用ダイアフラム Heaters for chemical tanks. Diaphragm for Vacuum lamination 一般機械器具製造業 General Machinery Manufacturer 精密機器 General Machinery Manufacturer 警笛凍結防止用ヒーター 連結器カバー用ヒーター Horn Ice Protection Built-in Coupler Heater 輸送機器 Transport Equipment 輸送機器 Transport Equipment 9
Page12

O&M SILICONE TEMPERATURE OTHER RUBBER HEATER CONTROLLER PRODUCTS ■標準価格表(参考) Standard prices list( sample) O&Mシリコーンラバーヒーター O&M Silicone Rubber Heaters 100mm 200mm 300mm 50mm 30W ¥7,310 60W ¥8,340 90W ¥8,600 100mm 60W ¥8,150 120W ¥8,550 180W ¥9,460 200mm 120W ¥8,550 240W ¥11,330 360W ¥12,560 300mm 180W ¥9,460 360W ¥12,560 540W ¥15,790 O&Mラバーヒーターホース(デジサーモOT-9付) O&M Self-heating Rubber Hose with Digithermo OT-9 Temperature Controller サイズ size SR1000 SR2000 SR3000 1/4inch (φ6) ¥128,000 ¥176,000 ¥224,000 3/8inch (φ8) ¥131,000 ¥182,000 ¥233,000 1/2inch(φ13) ¥149,000 ¥218,000 ¥287,000 3/4inch(φ19) ¥168,000 ¥233,000 ¥344,000 1inch(φ25) ¥186,000 ¥285,000 ¥401,000 O&Mドラムヒーター (デジサーモOT-9付) O&M Drum and Pail Can Heaters with Digithermo OT-9 Temperature Controller ドラム缶用ヒーター Heater for drum 250mm× 1780mm 200V 2000W ¥138,500 ペール缶用ヒーター Heater for pail can 200mm× 860mm 200V 800W ¥109,500 O&M温調器     O&M temperature controller DIGITHERMO OT-9 センサー込 ¥45,000 O&M温調器     O&M temperature controller DIGITHERMO OT-9 PRO With a censor ¥45,000 その他のタイプ Other Types 簡易ドラム缶用ヒーター Light type 250mm× 1780mm 200V 1400W ¥51,000 ドラム缶用ヒーターMGタイプ MG type 220mm× 1780mm 200V 2000W ¥92,000 シリコーンゴムテープ Silicone Tape TOM319R TOM325R TOM325B ¥2,700 ¥3,300 ¥3,800 ※各製品 10~19個 10%引き・20~49個 15%引き・50~100個 20%引き *Discount applied to each product.・10% off for 10-19 pieces.・15% off for 20-49 pieces.・20% off for 50-100 pieces. 10
Page13

シリコーンラバーヒーター SILICONE RUBBER HEATER 標準タイプ Standard Type Patent No.1402857 固定サーモ Bimetal Switch 異 型 Variant form R加工(円筒形成形) Cylindrical forming ハトメスプリングタイプ Grommet and spring Type ■特 長 ■ Features · 丸型、三角、台形、穴あきなど複雑な形状も、手ごろな価格で 1枚から製 · Different types of heaters such as round, triangle, or ones with holes 作でき短納期にも対応できます。 offered at reasonable prices. Minimum order of one piece, with a · ヒーター厚はわずか 1.5mmなので熱応答性に大変優れています。(シート quick delivery option. を積層することにより厚みの調整も可能です。) · High thermal response due to low thickness, with a standard · シリコーンラバーの柔軟性をいかし、筒型、円錐など被加熱物のどんな形 thickness of 1.5mm. 状にも完全にフィット可能です。 · Easy fit on cylinders, cones, and various curved surfaces because of · 低温度から 200℃まで使用可能。 its high flexibility. ·低電圧から 100V・200V・240Vなど、各種電圧設計に対応しています。 · Available from low temperature through 200℃ [392°F]. · Different designs including low voltage, 100V, 200V and 240V types ■電力密度 available. · 通常多くの用途に対して 0.6~ 0.8W/cm2が最適ですが、シリコーンラ ■ Power density バーヒーターの取付け状態、温度制御の方法によって大きく変動しますの で、選定に際しましては弊社営業までご照会ください。 · Power density range of 0.6-0.8W/cm2( 3.87-5.16W/in2) is suitable for our standard type in most cases, but this rate may vary ■ UL規格 depending on installation conditions or methods of thermal control. · シリコーンラバーヒーターの材料は Rogers(米国デラウェア州)製で UL Please contact us with questions. 規格ファイル No.E54153を使用しております。 ■ UL Standard · 標準タイプ、Eタイプは UL-94HB対応品ですが、より難燃グレードの高 · The material of the silicone rubber heater, manufactured by Rogers い UL94-V0対応品もご用意しております。 (U.S.A), is complied with UL standard file No. E54153. · イエローカードが必要なときは弊社技術部までご連絡ください。 · S TANDARD Type, and E Type are all UL-94HB supportive, but more fire resistant type of UL94-V0 is available. · Contact our engineering department if yellow card is required. 仕 様 Specifications 対応温度調節器 Correspondence thermoregulator 耐熱温度 連続使用温度 Heat Tolerance 200℃ 別置き対応:OT-9(PID制御) Pt100Ωセンサー Sensor Separated type Heat tolerance K熱電対センサー Thermo-couple 最高温度 Max temperature 250℃ 別置き対応:OT-9 PRO K熱電対 Thermo-couple 容量公差 Capacity Tolerance ±10% 電気特性 別置き対応:EGO 0~40℃・30~110℃・60~200℃ 絶縁抵抗値 Insulation Resistance 100MΩ以上 or over/DC500V Electric properties 耐電圧 Electric Strength 1500V/1分間 min 最 大 Max 800mm×3000mm 温度過昇防止器 Overheat preventer 寸 法 最 小 Min 25mm×50mm 固定サーモ Bimetal Switch 10℃~200℃ 温度選択 Temperature preference Size 厚 さ Thickness 1.5mm 温度ヒューズ Thermal Fuse 77℃~240℃ 温度選択 Temperature preference 11
Page14

シリコーンラバーヒーター SILICONE RUBBER HEATER Eタイプ E Type Eタイプ昇温速度例 Sudden Temperature Change アルミ1.0tに焼付 3w/cm2 150℃温度制御(比例制御) Fused to 1.0t of aluminum, 3w/cm2 150℃ temp. control( proportional control) 150 100 50 30 48 60 時間(秒) time( sec) 従来のシリコーンラバーヒーターがニッケル合金の丸線をパターン化している Silicone rubber heaters have traditionally used wound patterns of round のを、ニッケル合金箔を Etching加工してパターン化したものです。パターン nickel alloy wire. This heater instead uses patterns of etched nickel alloy の正確さ、一定化(量産化)が要求される場合に適しています。 foil. This process is ideal when accuracy and regularity of the pattern are essential, for example, when mass-production is required. ■特 長 · 初期費用は必要ですが、非常に密度の高い設計が可能です。 ■ Features · ヒーター厚はわずか 1.5mmなので熱応答性に大変優れています。 ·T hought the initial cost is incurred, very high power density is allowed. · シリコーンラバーの柔軟性をいかし、筒型、円錐など非加熱物のどんな形 · Possesses high thermal response due to low thickness, with a 状にも完全にフィット可能です。 standard thickness of 1.5mm. · 低温度から 200℃まで使用可能。 · Can easily be fit on cylinders, cones, and various curved surfaces because of its high flexibility. ·低電圧から 100V・200V・240Vなど、各種電圧設計に対応しています。 ·Available from low temperature to 200℃[ 392°F] . · 高ワット密度に製作できます。(3~ 5W/cm2)急速加熱に最適。 · Different designs including low voltage, 100V, 200V and 240V type · 加熱面の温度分布を正確に変化させることが出来ます。ピッチ巻等により、 are available. 温度精度の均一化が可能。(± 3℃―280× 600) ·T his heater allows high power densities of 3-5W/cm2( 19.35- 32.25W/in2) suitable for quick heating. ■電力密度 ·T he temperature distribution of the heating surface can be accurately · 1~ 5W/cm2ヒーターの取付け状態、温度制御の方法によって大きく変 controlled. Temperatures are more precise by pitch-winding(±3℃ for 動しますので、選定に際しましては弊社営業までご照会ください。 280mm × 600mm). ■ UL規格 ■ Power density · シリコーンラバーヒーターの材料は Rogers(米国デラウェア州)製で UL · Power density range of 1-5W/cm2( 6.45-32.25W/in2) is suitable 規格ファイル No.E54153を使用しております。 for our etched type in most cases, but this rate may vary depending on installation conditions or methods of thermal control. Please contact us with questions. ■ UL Standard · The material of the Silicone rubber heater, manufactured by Rogers (U.S.A), is complied with UL standard file No. E54153. 仕 様 Specifications 対応温度調節器 Correspondence thermoregulator 耐熱温度 連続使用温度 Heat Tolerance 200℃ 別置き対応:OT-9(PID制御) Pt100Ωセンサー Sensor Separated type Heat tolerance K熱電対センサー Thermo-couple 最高温度 Max temperature 250℃ 別置き対応:OT-9 PRO K熱電対 Thermo-couple 容量公差 Capacity Tolerance ±10% 電気特性 別置き対応:EGO 0~40℃・30~110℃・60~200℃ 絶縁抵抗値 Insulation Resistance 100MΩ以上 or over/DC500V Electric properties 耐電圧 Electric Strength 1500V/1分間 min 最 大 Max 480mm×1200mm 温度過昇防止器 Overheat preventer 寸 法 最 小 Min 25mm×50mm 固定サーモ Bimetal Switch 10℃~200℃ 温度選択 Temperature preference Size 厚 さ Thickness 1.5mm 温度ヒューズ Thermal Fuse 77℃~240℃ 温度選択 Temperature preference 12 温度(℃) temp (Degrees)
Page15

シリコーンラバーヒーター SILICONE RUBBER HEATER Eタイプ E Type Hタイプ H Type Patent No.1402857 耐熱(250℃) Extreme temperature resistance(250℃) センサーポケット Sensor Poket 押口バンド Adjustable Band センサー Pt100Ω RTD Pt100Ω ハトメスプリング Grommet and spring デジサーモ DIGITHERMO Hタイプはラバーヒーターの中でも高温(連続使用温度 250℃)での使用を Our H-type heater is specially designed for high temperature( heat 考慮して製作されています。 tolerance 250℃) uses. Since this type can be set with higher wattage 又、標準タイプに比べ高いワット密度の設定が出来るので、急速加熱が必要な density compared with the standard type, it is recommended to use this 箇所には Hタイプが適しています。 H-type for any place where quick heating is required. ■特 長 ■ Features · 丸型、三角、台形、穴あきなど複雑な形状も、手ごろな価格で 1枚から製 作でき短納期にも対応できます。 · Different types of heaters such as round, triangle, or ones with holes offered at reasonable prices. Minimum order of one piece, · ヒーター厚はわずか 1.5mmなので熱応答性に大変優れています。 with a quick delivery option. · シリコーンラバーの柔軟性をいかし、筒型、円錐など非加熱物のどんな形 · High thermal response due to low thickness, with a standard 状にも完全にフィット可能です。 thickness of 1.5mm. · 低温度から 250℃まで連続使用可能。 · Easy fit on cylinders, cones, and various curved surfaces because ·低電圧から 100V・200V・240Vなど、各種電圧設計に対応しています。 of its high flexibility. ■電力密度 · Available from low temperature through 250℃[ 482°F]. · 通常多くの用途に対して 0.8~ 1.5W/cm2が適切ですが、ヒーターの取 · Different designs including low voltage, 100V, 200V and 240V types 付け状態、温度制御の方法によって大きく変動しますので、選定に際しま available. しては弊社営業までご照会ください。 ■ Power density ·P ower density range of 0.8-1.5W/cm2( 5.16-9.68W/in2) is suitable for our H type in most cases, but this rate may vary depending on installation conditions or methods of thermal control. Please contact us with questions. 仕 様 Specifications 対応温度調節器 Correspondence thermoregulator 耐熱温度 連続使用温度 Heat Tolerance 250℃ 別置き対応:OT-9(PID制御) Pt100Ωセンサー Sensor Separated type Heat tolerance K熱電対センサー Thermo-couple 最高温度 Max temperature 300℃ 別置き対応:OT-9 PRO K熱電対 Thermo-couple 容量公差 Capacity Tolerance ±10% 電気特性 別置き対応:EGO 0~40℃・30~110℃・60~200℃ 絶縁抵抗値 Insulation Resistance 100MΩ以上 or over/DC500V Electric properties 耐電圧 Electric Strength 1500V/1分間 min 最 大 Max 800mm×3000mm 温度過昇防止器 Overheat preventer 寸 法 最 小 Min 25mm×50mm 固定サーモ Bimetal Switch 10℃~200℃ 温度選択 Temperature preference Size 厚 さ Thickness 1.5mm 温度ヒューズ Thermal Fuse 77℃~240℃ 温度選択 Temperature preference 13
Page16

シリコーンラバーヒーター SILICONE RUBBER HEATER MGタイプ MG Type Patent Pending シリコーンラバーヒーターに磁石(マグネット)の力で着脱楽々 ! Magnetic power makes attaching silicone rubber heaters easier than ever ! シリコーンラバーヒーター 耐熱磁性材(シリコーンラバーMG) silicone rubber heater heat-resisting magnetic material 着磁力(800ガウス) magnetic powe(r 800G) 金属 metal 熱 heat シリコーンラバーヒーターの片面をマグネットシート(ネオジム)で作製して Because silicone rubber heater MG type (Neodymium) has magnet いるので磁石の付く場所であれば簡単に設置、貼り付け保温加熱できます。 sheet on one side, it can be installed easily on any place where メンテナンス時やヒーターの位置合わせ時などの着脱を非常に簡単に行うこと magnet adherence is available. Moreover, this can be installed/ が可能です。 replaced easily for maintenance/alignment of the heater. ■特 長 ■ Features · 丸型、三角、台形、穴あきなど複雑な形状も、手ごろな価格で 1枚から製 · Different types of heaters such as round, triangle, or ones with 作でき短納期にも対応できます。 holes offered at reasonable prices. Minimum order of one piece, · ヒーター厚はわずか 1.5mmなので熱応答性に大変優れています。(シート with a quick delivery option. を積層することにより厚みの調整も可能です。) · High thermal response due to low thickness, with a standard · シリコーンラバーの柔軟性をいかし、筒型、円錐など非加熱物のどんな形 thickness of 1.5mm. 状にも完全にフィット可能です。 · Easy fit on cylinders, cones, and various curved surfaces because · 低温度から 200℃まで使用可能。 of its high flexibility. ·低電圧から 100V・200V・240Vなど、各種電圧設計に対応しています。 · Available from low temperature through 200℃[392°F]. ※200℃使用で約 1割の磁力の低下があります。 · Different designs including low voltage, 100V, 200V and 240V types ※再着磁のサービスも行っております。 available. *( approximately 10 percent magnetic power degradation at 200℃[ 392°F].) * We can remagnetize your heater MG type. 仕 様 Specifications 対応温度調節器 Correspondence thermoregulator 耐熱温度 連続使用温度 Heat Tolerance 200℃ 別置き対応:OT-9(PID制御) Pt100Ωセンサー Sensor Separated type Heat tolerance K熱電対センサー Thermo-couple 最高温度 Max temperature 250℃ 別置き対応:OT-9 PRO K熱電対 Thermo-couple 容量公差 Capacity Tolerance ±10% 電気特性 別置き対応:EGO 0~40℃・30~110℃・60~200℃ 絶縁抵抗値 Insulation Resistance 100MΩ以上 or over/DC500V Electric properties 耐電圧 Electric Strength 1500V/1分間 min 最 大 Max 600mm×3000mm 温度過昇防止器 Overheat preventer 寸 法 最 小 Min 25mm×50mm 固定サーモ Bimetal Switch 10℃~200℃ 温度選択 Temperature preference Size 厚 さ Thickness 1.5mm 温度ヒューズ Thermal Fuse 77℃~240℃ 温度選択 Temperature preference 14
Page17

シリコーンラバーヒーター SILICONE RUBBER HEATER MGタイプ MG Type ストレッチタイプ Stretch Type Patent No.1402857 あらゆる曲面に柔軟密着! This stretch type rubber heater flexibly fits all sorts of curved surfaces ! リード線長 Lead L(ヒーター外寸)(Heater Size) (40) L2(発熱エリア)(Element) (5~7) (2) ガラス繊維を含まないシリコーンゴムを採用し、柔軟度を確保! The silicone rubber without glass fiber assures great flexibility. また導電部に炭素繊維を採用することで、発熱線の折れを防止! The heating elements do not break due to the carbon fiber used. あらゆる曲面・形状に追従し、被加熱物に隙間なく密着することで優れた熱応答 Flexible rubber heater fits every curve and shape of the materials to 性を実現 provide a perfect contact, achieving high thermal response. ■特 長 ■ Features ·独自の製造方法(製造特許)により1枚からでも製作可能。 ·O ur patented method of manufacturing allows fabrication of only a single piece. · 通常のラバーヒーターに比べ三次元曲面に対し被加熱物への密着性が大幅 に ·C ontact to materials has drastically been improved compared with ordinary UP。 rubber heaters. · ニクロム線を使用していない為、発熱線の折れがありません。 ·T he heating wires do not break because nichrome wires are not used. ·航 空機補修時の加温・建築用鋼材溶接時の予熱などの応用分野にも活用可能。 ·A vailable for applications including heating for aircraft repair and preheating ·金 属に比べ、折れによる断線がしにくいですが断線しないものではありません。 for welding of construction steels. ·A lthough carbon fibers are less likely to be broken than nichrome wires, it ■ UL規格 does not mean that carbon fibers are never broken, which please note. · シリコーンラバーヒーターの材料は Rogers(米国デラウェア州)製で UL ■ UL Standard 規格ファイル No.E54153を使用しております。 · The material of the silicone rubber heater, manufactured by Rogers (U.S.A), is complied with UL standard file No. E54153. 仕 様 Specifications 使用例 Heater Application example 耐熱温度 連続使用温度 Heat Tolerance 200℃ 様々な分野で応用・活用が出来ます。 Heat tolerance 最高温度 Max temperature 250℃ 弊社営業までご相談下さい。 容量公差 Capacity Tolerance ±10% Our heaters can be applied in 電気特性 絶縁抵抗値 a wide variety of fields. Please Insulation Resistance 100MΩ以上 or over/DC500V Electric properties contact us with questions. 耐電圧 Electric Strength 1500V/1分間 min 最 大 Max 800mm×1200mm 寸 法 最 小 Min 25mm×50mm Size 厚 さ Thickness 2.4mm 伸び状態 使用範囲 ~150%(当社測定)※ Application range Elongation rate (in-house measurement)* ※パターン方向により変わる場合がございます *Elongation rate differs by heating element pattern. 15 W2(発熱エリア)(Element) W(ヒーター外寸)(Heater Size)
Page18

シリコーンラバーヒーター SILICONE RUBBER HEATER ドラム缶用ヒーター DRUM HEATER Patent No.1402857 標準タイプ Standard type このヒーターは高粘性液、凝固物の取り出しを簡単に行うために開発した装置 です。缶内の接着剤、グリス、アスファルト、ペイント、ワックス、オイル、 各種樹脂原料などを加熱することにより粘度の一定化ができ、ポンプ能力も 小さくすみます。したがって季節に関係なく使用できます。 温度センサー 温度調節器 締付ファスナー 金具取付ベース T温em度pセerンatuサ reー s en so r T em p e  ra tu re Controller fastener adjustment fastener base This heater has been specifically designed to facilitate easy pumping of Temperature sensor various viscous materials from a drum. 締付ファスナー 85 fasシteリnコerン aラdjuバsーtmヒeーntター Heating adhesives, grease, asphalt, paint, wax, oil and various resinous SILICONE RUBBER HEATER materials results in a constant viscosity, maximizing pump efficiency. This heater can be used regardless of seasonal and climatic changes. 脱着用取手 desorptive 金具取付ベース handle fastener base ■特 長 ·シ リコーンラバーヒーターをステンレス板に全面焼付した熱板のため、ドラ デジサーモ DIGITHERMO ム缶、ペール缶、1斗缶などに直接フィットし、熱効率が高くなっています。 ヒーターターミナル heater terminal · 温度調節はセンサーをヒーターの表面に取り付け、直接温度をコントロール しています。 電源コード ヒーター · シリコーンラバーヒーター及び温度調節器が一体化されているので、取り power cord ターミナル 50 heater 150 ラバーヒーター全長 回しが簡単で、また締付け金具がワンタッチ式のため、非常に簡単に取付 terminal rubber heater total length けできます。 1780(ドラム缶drum) 860(ペール缶pail can) 100 250 ■ Features · High heat efficiency, due to the addition of a stainless steel backing, ヒーター熱板( which can directly transfer heat to the can. SUS) heat plate · Temperature controller is located directly on the heated surface, increasing precision of temperature control. 20-50ネジ(SUS)調節 ·H andling is easy due to the integrated design of the Silicone screw adjustment rubber heater and a temperature controller. Additionally, very easy installation is provided with one-touch clamp. 仕 様 Specifications 温度調節器 Temperature Controller ドラム缶用(200ℓ) ペール缶用(20ℓ) 1斗缶用(18ℓ) 一体式または別置き対応: Pt100Ωセンサー Sensor for Drum for Pail can for Itto can OT-9(PID制御)Separated type K熱電対センサー Thermo-couple 寸 法 250mm× 1780mm 200mm× 860mm 250mm× 900mm 一体式または別置き対応:OT-9 PRO K熱電対 Thermo-couple Size 容 量 200V 2000W 200V 800W 200V 1000W 〈標準 EGOタイプ〉 Power Input 温度調節 一体式または別置き対応:EGO 0~40℃・30~110℃・60~200℃ 0-200℃可変 Variable 0-200℃可変 Variable 0-200℃可変 Variable Temperature Control 重 量 約 appro. 5kg 約 appro. 4kg 約 appro. 5kg Weight EGOタイプ EGO type 簡易タイプ Light type ■特 長 ■特 長 · ドラムヒーターの EGO温度調 節器タイプです。 ·ス テンレス板の付かない軽量タイプで、 取り付けもフックスプリングで行います。 ·寸 法:250mm× 1780mm ·寸 法:250mm× 1780mm ·容 量:200V 2000W ·容 量:200V 1400W ■ Features ■ Features · EGO temperature controller type of drum heater. · L ightweight without stainless plate, installed with hook springs. · Size:250mm× 1780mm · Size:250mm× 1780mm · Power Input:200V 2000W · Power Input:200V 1400W 16 100 130 30 30 98 30 43 100 250(200)
Page19

ドラム缶用ヒーター DRUM HEATER MGタイプ MG type 着磁力 800ガウス シリコーンラバーヒーターの片面をマグネットシート(ネオジム)で作製してい Magnetic power 800G るので磁石の付く場所であれば、簡単に設置、貼り付けできます。メンテナンス 時やヒーターの位置合わせ時などの着脱を手軽に簡単に行うことが可能です。 Because silicone rubber heater MG type (Neodymium) has magnet sheet on one side, it can be installed easily on any place where magnet adherence is available. Moreover, this can be installed/ replaced easily for maintenance/alignment of the heater. ■特 長 ·複雑な形状も、1枚から製作でき短納期にも対応できます。 ·ファスナー、フック、スプリングなどの部品を減らす事で低価格化を実現。 · ヒーター厚はわずか 1.5㎜で優れた熱応答性です。(シートを積層すること により厚みの調整も可能) · シリコーンラバーの柔軟性をいかし、筒型、円錐など非加熱物のどんな形 状にも完全にフィットします。 ·多様な経験から用途に応じ最適な保温・加熱方法をご提案します。※1 ·低温度から 200℃まで使用可能 。※2 仕 様  ·低電圧から 100V・200V・240Vなど、各種電圧設計に対応しています。 Specifications ※ 1 磁性シートを利用した用途も一度お問い合わせ下さい。 ドラム缶用(200ℓ) ペール缶用(20ℓ) 1斗缶用(18ℓ) ※ 2 200℃使用で約 1割の磁力の低下があります。 for Drum for Pail can for Itto can 寸  法 Size 220mm× 1780mm 200mm× 860mm 200mm× 865mm ■ Features 容 量 Power Input - 100V 600W 100V 450W · Different types of heaters such as round, triangle, or ones with holes are offered at reasonable prices. Minimum order is one piece, quick 容 量 Power Input 200V 2000W 200V 600W 200V 450W delivery is available. 温度調節 Temperature Control 0~40℃・30~110℃・60~200℃可変 Variable ·C ompared with the old type, low price has been achieved by decreasing 重 量 Weight 約 appro. 2.2kg 約 appro. 1.1kg 約 appro. 1.4kg parts such as fasteners, hooks, and springs. ·H eater thickness is as thin as 1.5mm, with excellent response.( Thickness 過昇防止 Overtemperature ヒーター表面に温度ヒューズ 184℃付 protection Thermal fuse 184℃ is on the surface of the heater can be customized by stacking sheets.) ·C an easily be fitted to cylinders, cones, and various curved surfaces because of its high flexibility. 対応温度調節器 Correspondence thermoregulator ·W ith rich experience, we can offer the most optimized heating/ insulation 一体式:EGO Integrated type 0~40℃・30~110℃・60~200℃ for many applications. *1 ·A vailable from low temperature to 200℃[ 392°F] . *2 別置き対応:OT-9(PID制御) Pt100Ωセンサー Sensor Separated type K熱電対センサー Thermo-couple ·D ifferent designs including low voltage, 100V, 200V and 240V type are available. 別置き対応:OT-9 PRO K熱電対 Thermo-couple *1( For customization of the magnetic sheet application, do not hesitate to contact us. You ·一体式:ヒーターと一体型の表現です。· Integrated type:integrated with the heater. are always welcomed.) ·別置き:ヒーターとコントローラーは別置きの表現です。·Separated type:heater and controller are separated from each other. *2( approximately 10 percent magnetic power degradation at 200℃[ 392°F].) ドラム缶昇温実験 Test on temp. rising of drum 80 ❷ 200V 4000W(ヒーター 2本) 2heater 熱 heat 70 60 ❶ 200V 2000W(ヒーター 1本) 1heater 50 40 シリコーンラバーヒーター silicone rubber heater 30 ラバーヒーター面積サイズ 250×1780(size) 20 実質昇温 50℃(substantial temp. rising) 水 200ℓ入(water 200 L) 1H 2 3 4 5 6 7 8 9 (時間)Hours 17 Degrees(℃)
Page20

シリコーンラバーヒーター SILICONE RUBBER HEATER 防滴タイプ DRIP PROOF Type 防滴素材 Drip-proof material 自由形状 Free form 結露対策 Condensation measures 防滴素材を採用、屋外や水のかかる場所に適しています。 It is ideal for outdoor use because it uses a drip-proof material. ■特 長 · 水がかかっても大丈夫な素材を使用した防滴タイプです。 水滴 drop of water 屋外や水のかかる場所での使用に最適です。 · 丸型、三角、台形、穴あきなど複雑な形状も、手ごろな価格で 1枚から製 シリコーンラバー ヒーター 作でき短納期にも対応できます。 SILICONE RUBBER HEATER · シリコーンラバーの柔軟性を活かし、筒形、円錐など、被加熱物のあらゆ シリコーンラバー る形状にフィットします。 発熱体 (特殊防水素材) heating element silicone rubber ·防 滴素材を使用することで、結露による絶縁抵抗値を保つことが可能です。 (special waterproof material) ※センサーは使用環境にあったものを選定ください。 被加熱物 *Select a sensor that suits the usage environment. the object to be heated 熱 heat ■ Features · Is is a drip-proof material.Even when a water uses fine materials. It is ideal for use in a place where outdoor and water. · Different types of heaters such as round, triangle, or ones with holes offered at reasonable prices. Minimum order of one piece, with a 水中絶縁試験(連続通電) Water insulation test (Continuous power supply) quick delivery option. · Easy fit on cylinders, cones, and various curved surfaces because of its flexibility. ∞ · The use of a drip-proof material, it is possible to keep the insulation resistance due to condensation. 1000 防滴タイプ DRIP PROOF Type 仕 様 Specifications 800 耐熱温度 連続使用温度 Heat Tolerance 200℃ 600 Heat tolerance 最高温度 Max temperature 250℃ 容量公差 Capacity Tolerance ±10% 400 電気特性 絶縁抵抗値 Insulation Resistance 100MΩ以上 or over/DC500V Electric properties 耐電圧 Electric Strength 1500V/1分間 200 通常タイプ min Standard Type 最 大 Max 400mm×800mm 寸 法 最 小 Min 25mm×50mm Size 0 3 6 9 12 15 18 21 24 27 厚 さ Thickness 1.5mm 通電期間 Month(ヶ月) 18 絶縁抵抗値 Insulation Resistance(MΩ)