PoEエクステンダー PLANET IPOE-E202

IPOE-E202 Industrial IP63-rated 1-Port 802.3at PoE+ to 2-Port 802.3af PoE Extender Physical Port • 3 10/100/1000BASE-T Gigabit RJ45 interfaces – 1-port data + power input – 2-port data + power output Power over Ethernet • 1-port data + power input – Complies with IEEE 802.3at Power over Ethernet Plus end- span/mid-span PD – Supports PoE input power up to 30.8 watts • 2-port data + power output – Complies with IEEE 802.3af/802.3at Power over Ethernet/ end-span PSE – Up to 2 IEEE 802.3af/802.3at devices powered PoE Solution for Breaking RJ45 100m Limitation – Supports PoE power up to 25 watts for each PoE port PLANET IPOE-E202 is an industrial IP63-rated 1-port PoE+ to 2-port 802.3af/at – Auto detects powered device (PD) Gigabit PoE Extender designed especially for point to multipoint PoE application. The • Extends the range of PoE to an additional 100 meters (328ft.) • Forwards both Ethernet data and PoE power to remote device IPOE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for 2 PoE output ports, extending Layer 2 Features both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the • Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/ UTP cable. The IPOE-E202 provides a simple solution for adding PoE ports without MDI-X running more cabling and achieves more flexible network applications without requiring • Features Store-and-Forward mode with wire-speed filtering and forwarding rates an external power adapter. • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation • Integrates address look-up engine, supporting 2K absolute MAC addresses • 9K jumbo frame support in 1000Mbps duplex mode 1 In 1 Out 25W • Automatic address learning and address aging Power • Supports CSMA/CD protocol PoE+/30W Industrial Case and Installation Data 100m IEEE 802.3at/25W PoE Injector/Switch 100m • IP63-rated aluminum case PoE PTZ IP Camera PoE Extender • Wall-mount design • Waterproof and dustproof 12W+12W • Supports EFT protection of 2000 VDC for power line 1 In 2 Out • Supports 2000 VDC Ethernet ESD protection • -40 to 75 degrees C operating temperature Power IEEE 802.3af/12W • No external power cable required for installation PoE+/30W 100m • Plug and Play installation Data 100m IEEE 802.3af/12W PoE Injector/Switch 100m Standard Compliance PoE Extender PoE Dome IP Camera • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3x Flow Control • IEEE 802.3at Power over Ethernet Plus • IEEE 802.3af Power over Ethernet • FCC Part 15 Class A, CE 1

IPOE-E202 Weather-proof RJ45 Ethernet Connector and Shielded Plug The IPOE-E202 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and much more. The IPOE-E202 is equipped with 3-port 10/100/1000BASE-T auto-negotiation weather-proof RJ45 connectors and 3 shielded RJ45 plugs for direct attach applications. These shielded RJ45 plugs can make the general UTP cable weather-proof. When connected to the weather-proof RJ45 connector, it provides tight and strong connection, and ensures it comes with the industrial protection rating of IP63 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold. + + = Environmentally Hardened Design With industrial-level IP63-rated aluminum case, the IPOE-E202 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment. Intelligent PoE Power Budget Alert The IPOE-E202 helps users to monitor the current status of PoE power usage easily via its advanced LED indication, which is called “Budget Alert” on the front panel of the IPOE-E202. When the PoE output power is over 20 watts, this Budget Alert LED will light up. 2

IPOE-E202 Plug and Play, and Easy Cabling Installation The IPOE-E202 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD). The IPOE-E202 injects power to the PD without affecting the data transmission performance. The IPOE-E202 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The IPOE-E202 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other two "PoE OUT" ports on the other side function as PoE (Data and Power) output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD. Applications One Power Sourcing for Multi Powered Devices Solution To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET IPOE-E202 is quite a useful accessory if users have most of their network already set up, and wish to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow. Control Center PoE PSE/PoE Switch 100m IPOE-E202 PoE PoE PoE 100m 100m PoE PoE IP Camera IP Camera The IPOE-E202 industrial 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender requires very little installation time and does not require any additional setup or programming by just using standard RJ45 cable from power sourcing device (PSE). The PoE+ injector port of the PSE supplies IEEE802.3at PoE+ power to the IPOE-E202 and then the IPOE-E202 converts power for 2 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional power adapter for IP cameras and wireless access points is not necessary. PoE PoE 20m 20m PoE PoE PoE 802.3af/at PoE Out 802.3at PoE In IPOE-E202 PoE 100m 3

IPOE-E202 Specifications Model IPOE-E202 Hardware Specifications Hardware Version 2 PoE In Port 1 x 10/100/1000BASE-T Ethernet with 802.3at PoE+ “Data + Power” in, auto MDI/MDI-X, auto-negotiation RJ45 Network Connector connectorPoE Out Port 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + Power” out, auto MDI/MDI-X, auto- negotiation RJ45 connector Switch Architecture Store-and-Forward switch architecture MAC Address Table 2K MAC address table with auto learning function Data Buffer 1Mbit Switch Fabric 6Gbps Switch Throughput 4.46Mpps @ 64 bytes Flow Control IEEE 802.3x pause frame for full duplexBack pressure for half duplex Jumbo Frame 9KB ESD Protection 2KV DC EFT Protection 2KV DC Enclosure IP63 aluminum case Installation Wall-mount kit System: PWR (green) Budget Alert (orange) LED Display PoE Input Port: LNK/ACT (orange)PoE Input Port: 1000 (green) Per PoE Output Port: LNK/ACT (green) Per PoE Output Port: PoE-in-Use (orange) Twisted-pair cable : Cable 10BASE-T: 2-pair UTP Cat3, 4, 5 up to 100 meters100BASE-TX: 2-pair UTP Cat5, 5e up to 100 meters 1000BASE-T: 4-pair UTP Cat5e, 6 up to 100 meters Dimensions (W x D x H) 199.6 x 81 x 40 mm Weight 373g Power Consumption 30 watts/102.3BTU (Full loading with PoE function) Power over Ethernet PoE In Port IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD PoE Standard Per PoE Out Port IEEE 802.3at Power over Ethernet Plus end-span PSE IEEE 802.3af Power over Ethernet end-span PSE PoE In Port PoE Power 50~57V DC, max. 30.8 wattsPer PoE Out Port 44~55V DC, max. 25 watts PoE In Port Power Pin Assignment 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)Per PoE Out Port 1/2 (-), 3/6 (+) Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet Standards Compliance IEEE 802.3ab Gigabit EthernetIEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus Environment Operating Temperature:-40 ~ 75 degrees CRelative Humidity:5 ~ 95% (non-condensing) Storage Temperature:-40 ~ 85 degrees CRelative Humidity:5 ~ 95% (non-condensing) Accessory User’s manual x1 Standard Accessories Waterproof RJ45 Connector x3Waterproof RJ45 Cap x 3 Wall-mounted Kit x 1 4

IPOE-E202 Three View Diagram PoE 1 Out PoE 2 Out LNK ACT PoE In-use Ordering Information IPOE-E202 Industrial 1-Port 802.3at PoE+ to 2-Port 802.3af PoE Extender Related Products IGS-604HPT-RJ Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IPOE-E174 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender POE-E201 IEEE 802.3at Power over Gigabit Ethernet Extender POE-E101 IEEE 802.3af Power over Ethernet Extender PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IPOE-E202v2 Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 5 PoE IN Budget Alert 1000 10/100/1000T LNK/ACT PWR IPOE-E202