工業用イーサネットスイッチ PLANET WGS-4215-8T2S

WGS-4215-8T2S Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP Wall-mount Managed Switch Physical Port • 8-port 10/100/1000BASE-T Gigabit RJ45 copper • 2 100/1000BASE-X mini-GBIC/SFP slots Industrial Case / Installation • Compact size, wall-mounted, magnetic wall mount and DIN- rail design • IP30 metal case protection • Supports -40 to 75 degrees C operating temperature • Supports EFT protection of 6KV DC for power line • Supports ESD 6KV DC Ethernet protection Easily-deployed and Expanded Network • Redundant power design Designed to be installed in a wall enclosure or simply mounted on a wall at any – 12V~48V DC/24V AC terminal block/12V~48V DC jack convenient location, PLANET WGS-4215-8T2S, an innovative, Industrial 8-port power input 10/100/1000T + 2-port 100/1000X SFP Wall-mount Managed Switch, offers IPv6/IPv4 – 12V~48V DC input range for booting with polarity reverse dual stack management, intelligent Layer 2 management functions, and user-friendly protect function interface. The WGS-4215-8T2S is able to operate reliably, stably and quietly in any environment without affecting its performance. Featuring ultra networking speed and Switching operating temperature ranging from -40 to 75 degrees C in a compact but rugged IP30 • Hardware based 10/100Mbps, half/full duplex and 1000Mbps metal housing, the WGS-4215-8T2S is an ideal solution to meeting the demand for the full duplex mode, flow control and auto-negotiation and auto following network applications: MDI/MDI-X • Features Store-and-Forward mode with wire-speed filtering • Building/Home automation network and forwarding rates • Internet of things (IoT) • IEEE 802.3x flow control for full duplex operation and back • IP surveillance pressure for half duplex operation • Wireless LAN • 8K MAC address table size • 9K iumbo frame 10/100/1000BASE-T RJ45 Port • Automatic address learning and address aging 3-pin Terminal Block • Supports CSMA/CD protocol Input DC 12V-48V Input DC 12V-48V AC 24V AC 24V Ground Ground V - V 1 2 3 4- V+ Layer 2 Features V+ PWR Power LED 9 SFP DC Input Range • Supports VLAN 12V-48V 10 100/1000X SFP 1000 LNK ACT 100 LNK ACT LNK/ACT Status DC Input Range 12V-48V – IEEE 802.1Q tagged VLAN DC Jack Industrial 8-Port 10/100/1000T +2-Port 100/1000X SFP Managed Switch – Provides bridging (VLAN Q-in-Q, IEEE 802.1ad) support WGS-4215-8T2S – Protocol VLAN 1000 LNK ACT 10/100 LNK ACT – Voice VLAN SFP 9 10 5 6 7 8 – Private VLAN (Protected port) – Management VLAN 100/1000X SFP Slot 10/100/1000BASE-T RJ45 Port Data Sheet 1 1

WGS-4215-8T2S Innovative Wall-mount Installation The WGS-4215-8T2S is specially designed to be installed in a narrow environment, – GVRP such as wall enclosure or electric weak box. The compact, flat and wall-mounted design • Supports Spanning Tree Protocol fits easily in any space-limited location. It adopts the user-friendly “Front Access” design, – STP (Spanning Tree Protocol) making the installing, cable wiring, LED monitoring and maintenance of the WGS-4215- – RSTP (Rapid Spanning Tree Protocol) 8T2S placed in an enclosure very convenient for technicians. The WGS-4215-8T2S can – MSTP (Multiple Spanning Tree Protocol) be installed by fixed wall mounting, magnetic wall mounting or DIN rail, thereby making – STP BPDU Guard, BPDU Filtering and BPDU Forwarding its usability more flexible. • Supports Link Aggregation – IEEE 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) – Maximum 4 trunk groups, up to 8 ports per trunk group • Provides port mirror (many-to-1) • Loop protection to avoid broadcast loops Quality of Service • Ingress/Egress Rate Limit per port bandwidth control • Traffic classification – IEEE 802.1p CoS – TOS/DSCP/IP precedence of IPv4/IPv6 packets • Strict priority and Weighted Round Robin (WRR) CoS Dual Power Input for High Availability Network System policies The WGS-4215-8T2S features a strong dual power input system (12V~48V DC or 24V AC) incorporated into customer’s automation network to enhance system reliability and Multicast uptime. In the example below, when the 3-pin terminal block fails to work, the hardware • Supports IPv4 IGMP snooping v2 and v3 failover function will be activated automatically to keep powering the WGS-4215-8T2S • Supports IPv6 MLD snooping v1, v2 via the DC plug power alternatively without any loss of operation. • IGMP querier mode support • IGMP snooping port filtering • MLD snooping port filtering AP IP Camera AP IP Camera Security • Storm Control support – Broadcast/Unknown unicast/Unknown multicast • Authentication – IEEE 802.1X port-based network access authentication – Built-in RADIUS client to co-operate with the RADIUS servers DC DC DC DC – DHCP Option 82 – RADIUS/TACACS+ authentication • Access Control List Router PC Router PC – IPv4/IPv6 IP-based ACL 12V~48V DC 12V~48V DC Power Power 12V~48V DC 12V~48V DC – IPv4/IPv6 IP-based ACE DC Power Line (DC) – MAC-based ACL 1000BASE-T UTP – MAC-based ACE 2

WGS-4215-8T2S Environmentally Hardened Design With IP30, flat but rugged metal housing protection, the WGS-4215-8T2S provides a • MAC Security high level of immunity against electromagnetic interference and heavy electrical surges – Static MAC which are usually found on plant floors or in curb side traffic control cabinets without air – MAC filtering conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, • Port security for source MAC address entries filtering the WGS-4215-8T2S can be placed in almost any difficult environment. • DHCP snooping to filter distrusted DHCP messages • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding IPv6 / IPv4 Dual Stack Management • IP source guard prevents IP spoofing attacks Supporting both IPv6 and IPv4 protocols, the WGS-4215-8T2S helps the SMBs to step in • DoS attack prevention the IPv6 era with the lowest investment as its network facilities need not be replaced or • SSH / SSL overhauled if the IPv6 FTTx edge network is set up. Management Robust Layer 2 Features • IPv4 and IPv6 dual stack management • Switch Management Interface The WGS-4215-8T2S can be programmed for advanced switch management functions – IPv4 / IPv6 Web switch management such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning – Telnet Command Line Interface Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via – SNMP v1, v2c and v3 the link aggregation, the WGS-4215-8T2S allows the operation of a high-speed trunk to – SSH and SSL secure access combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well. • User privilege levels control Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help • Built-in Trivial File Transfer Protocol (TFTP) client discover basic information about neighboring devices on the local broadcast domain. • Static and DHCP for IP address assignment • System Maintenance – Firmware upload/download via HTTP / TFTP – Configuration upload/download through HTTP / TFTP MSTP LACP – Hardware reset button for system reboot or reset to Q-in-Q QoS LLDP factory default MLD IGMP • SNTP Network Time Protocol L2/L4 L2/L4 • Cable diagnostics Managed Switch Managed Switch • Link Layer Discovery Protocol (LLDP) Protocol and LLDP- MED • SNMP trap for interface Link Up and Link Down notification Efficient Traffic Control • Event message logging to remote Syslog server The WGS-4215-8T2S is loaded with robust QoS features and powerful traffic • Four RMON groups (history, statistics, alarms and events) management to enhance services to business-class data, voice, and video solutions. The • PLANET Smart Discovery Utility functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance at VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. 3

WGS-4215-8T2S Friendly and Secure Management For efficient management, the WGS-4215-8T2S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the WGS-4215-8T2S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the WGS- 4215-8T2S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. Advanced Network Security PLANET WGS-4215-8T2S offers a comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, the WGS- 4215-8T2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discarded ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Flexibility and Long-distance Extension Solution The two mini-GBIC slots built in the WGS-4215-8T2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The WGS-4215-8T2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage. Ready to Go with IoT Generation Internet is very popular the world over as users surf online daily with their mobile devices, such as smart phones, tablets, or laptop computers. However, users expect more from the convenience of Internet, like how to use their mobile devices to control something via the Internet, thus making life more convenient. The WGS-4215-8T2S is based on such concept to help users implement the Internet of things (IoT) on the SOHO/Home network. Home automation is no longer a dream as Gigabit network can easily cloud IoT equipment, making it a smart home. 4

WGS-4215-8T2S Applications Security Building Automation Switch Suitable for buildings where security is strictly to be enforced, the WGS-4215-8T2S Industrial Wall-mount Managed Switch offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-4215-8T2S, a tightly-controlled network can be easily had in no time. IP Camera Wireless AP Ethernet Switch 1000 Core Fiber Switch WGS-4215-8T2S |O|O| 1000 1000BASE-SX/LX Fiber-optic 100BASE-TX UTP 1000BASE-T UTP Security Gate Serial Server Access Control IP Camera |O|O| Serial Line (RS-XXX) FTTX / MAN Application The WGS-4215-8T2S adopts the double tag VLAN (Q-in-Q) technology to provide low cost and easy operation for service providers carrying traffic for multiple customers across their networks. With two dual-speed SFP slots built in, the deployment distance of the WGS-4215-8T2S can be extended up to 120 kilometers (single-mode fiber), which provides a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP and Bidi (WDM) transceivers are optional for customers. For security and various applications, the 8 Gigabit ports of the WGS-4215-8T2S can be configured with VLAN settings and connected to different units, offices, floors, houses and departments. FTT Curb FTT Building IP Camera 802.1x QoS Q-in-Q VLAN WGS-4215-8T2S ACL 1000 UTM Security Gateway Wireless AP 1000 1000 1000 1000 1000 1000 Metro Switch Administration Building 1000 1000Base-SX/LX Fiber-optic 1000Base-T UTP 5

WGS-4215-8T2S Redundant Connection for Continuous Data Transmission The WGS-4215-8T2S features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates Multiple Spanning Tree Protocol (802.1s MSTP) into customer’s automation network to enhance system reliability and uptime. Station 1 Mountain Station 2 -40 ℃ Station 3 1000 1000 1000 Up to 120km Up to 120km 1000 1000 Up to 120km Up to 120km WGS-4215-8T2S Redundant Connection 75 ℃ 1000 1000 1000 Up to 120km WGS-4215-8T2S WGS-4215-8T2S Control Center Factory 1000 1000Base-SX/LX Fiber-optic Industrial Area Switch for Data Collection and Forwarding The WGS-4215-8T2S is equipped with 8 10/100/1000Mbps ports offering auto MDI/MDIX feature and 2 Gigabit SFP interfaces (port 9 and port 10), providing 20Gbps non-blocking switch fabric and the 8K MAC address table so that the WGS-4215-8T2S can perform wire-speed packets transfer without the risk of packet loss. The WGS-4215-8T2S with the slim type IP30 metal case is ideal for most heavy industrial demanding environments. Control Center WGS-4215-8T2S Serial over IGT-1205AT Ethernet Device 20km PLC 100 I/O Outdoor IGT-805AT I/O IP Camera I/O 1000 50km 1000 Robot IGT-1205AT 120km Robot Subway 2 Maintenance Shop Outdoor IP Camera Subway 1 100 100BASE-FX Fiber-optic 100BASE-TX UTP 1000 1000BASE-SX/LX Fiber-optic I/O DI/DO 6

WGS-4215-8T2S Product Specifications Product WGS-4215-8T2S Hardware Specifications Copper Ports Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports SFP/mini-GBIC Slots Two 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode Switch Architecture Store-and-Forward Switch Fabric 20Gbps/non-blocking Switch Throughput@64 bytes 14.8Mpps @64 bytes MAC Address Table 8K entries Shared Data Buffer 4.1 megabits Flow Control IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex Jumbo Frame 9216 bytes Reset Button < 5 sec: System reboot> 5 sec: Factory default System: Power (Green) LED 10/100/1000T RJ45 Interfaces (Port 1 to Port 8):1000 LNK / ACT (Green), 10/100 LNK/ACT (Orange) 100/1000Mbps SFP Interfaces (Port 9 to Port 10): 1000 LNK / ACT (Green), 100 LNK/ACT (Orange) • Removable 3-pin terminal block for power input Connector – Pin 1/2 for DC Power (Pin 1: v+ / Pin 2: V-)– Pin 3 for earth ground • DC power jack with 2.0mm central pole Power Requirements 12V~48V DC,1A / 24V AC,1A terminal block 12V~48V, 1A DC jack power input Power Consumption/ Dissipation Max. 7.9 watts/26BTU Dimensions (W x D x H) 178 x 25 x 134 mm Weight 663g ESD Protection 6KV DC EFT Protection 6KV DC Enclosure Metal Installation Wall mount, magnetic wall mount and DIN-rail kit Layer 2 Functions Port Mirroring TX/RX/BothMany-to-1 monitor 802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) VLAN Voice VLANProtocol VLAN Private VLAN (Protected port) GVRP Management VLAN Link Aggregation IEEE 802.3ad LACP and static trunkSupports 4 groups with 8 ports per trunk STP, IEEE 802.1D Spanning Tree Protocol Spanning Tree Protocol RSTP, IEEE 802.1w Rapid Spanning Tree ProtocolMSTP, IEEE 802.1s Multiple Spanning Tree Protocol STP BPDU Guard, BPDU Filtering and BPDU Forwarding IPv4 IGMP (v2/v3) snooping IGMP Snooping IGMP querier Up to 256 multicast groups MLD Snooping IPv6 MLD (v1/v2) snooping, up to 256 multicast groups Access Control List IPv4/IPv6 IP-based ACL / MAC-based ACLIPv4/IPv6 IP-based ACE / MAC-based ACE 8 mapping ID to 8 level priority queues – Port Number QoS – 802.1p priority– DSCP/IP precedence of IPv4/IPv6 packets Traffic classification based, strict priority and WRR Ingress/Egress Rate Limit per port bandwidth control 7

WGS-4215-8T2S IEEE 802.1X port-based authentication Built-in RADIUS client to co-operate with RADIUS server RADIUS/TACACS+ authentication IP-MAC port binding MAC filtering Static MAC address Security DHCP snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard Storm control support – Broadcast/Unknown unicast/Unknown multicast Management Functions Web browser/Telnet/SNMP v1, v2c, v3 Firmware upgrade by HTTP/TFTP protocol through Ethernet network Configuration upload/download through HTTP/TFTP Basic Management Interfaces Remote/Local SyslogSystem log LLDP protocol SNTP PLANET Smart Discovery Utility Secure Management Interfaces SSH, SSL, SNMP v3 RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB SNMP MIBs RFC 2674 Bridge MIB ExtensionsRFC 2737 Entity MIB (Version 2) RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port Trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging Standards Compliance IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 Standards Conformance Operating Temperature: -40 ~ 75 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -40 ~ 75 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Accessories • Quick Installation Guide x 1 • 3-pin Terminal Block Connector x 1 • Wall-mounted Kit x 1 Standard Accessories • DIN-rail Kit x 1 • Magnet Kit x 1 • RJ45 Dust Cap x 8 • SFP Dust Cap x 2 8

WGS-4215-8T2S Drawing Input DC 12V-48V AC 24V Ground V - 1 2 3 4 V+ PWR 9 SFP DC Input Range 12V-48V 10 1000 LNK ACT 100 LNK ACT Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch WGS-4215-8T2S 1000 LNK ACT 10/100 LNK ACT SFP 9 10 5 6 7 8 Reset 9 10 Dimensions ( unit = mm ) 9

WGS-4215-8T2S Ordering Information WGS-4215-8T2S Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP Wall-mount Managed Switch (-40~75 degrees C) Accessories PWR-40-24 40W 24V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C) PWR-60-24 60W 24V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C) PWR-75-24 75W 24V DC Single Output Industrial DIN-rail Power Supply (-10 ~ 60 degrees C) Related Products WGS-4215-8T Industrial 8-Port 10/100/1000T Wall-mount Managed Switch (-40~75 degrees C) WGS-803 Industrial 8-Port 10/100/1000T Wall-mounted Gigabit Ethernet Switch (-10~60 degrees C) WGS-804HP Industrial 8-Port 10/100/1000T Wall-mounted Gigabit Ethernet Switch with 4-Port PoE+ (-10~60 degrees C) Available Gigabit SFP Modules MGB-GT SFP-Port 1000BASE-T Module MGB-SX SFP-Port 1000BASE-SX mini-GBIC module - 550m MGB-SX2 SFP-Port 1000BASE-SX mini-GBIC module - 2km MGB-LX SFP-Port 1000BASE-LX mini-GBIC module - 10km MGB-L30 SFP-Port 1000BASE-LX mini-GBIC module - 30km MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module - 50km MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module - 70km MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km MGB-TSX SFP-Port 1000BASE-SX mini-GBIC module - 550m (-40 ~ 75 degrees C) MGB-TLX SFP-Port 1000BASE-LX mini-GBIC module - 10km (-40 ~ 75 degrees C) MGB-TL30 SFP-Port 1000BASE-LX mini-GBIC module - 30km (-40 ~ 75 degrees C) MGB-TL70 SFP-Port 1000BASE-LX mini-GBIC module - 70km (-40 ~ 75 degrees C) Available 100Mbps Modules MFB-FX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km MFB-F20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km MFB-F40 SFP-Port 100BASE-FX Transceiver (1310nm) - 40km MFB-F60 SFP-Port 100BASE-FX Transceiver (1310nm) - 60km MFB-FA20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) - 20km MFB-FB20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) - 20km MFB-TFX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km (-40 ~ 75 degrees C) MFB-TF20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km (-40 ~ 75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City WGS-4215-8T2S 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2015 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 10