1/3ページ
ダウンロード(502.6Kb)
4ポート10/100Base-TX+1ポート100Base-FX,-40-75℃
このカタログについて
ドキュメント名 | 工業用イーサネットスイッチ PLANET ISW-511T/511TS15 |
---|---|
ドキュメント種別 | 製品カタログ |
ファイルサイズ | 502.6Kb |
登録カテゴリ | |
取り扱い企業 | サンテックス株式会社 (この企業の取り扱いカタログ一覧) |
この企業の関連カタログ
このカタログの内容
Page1
ISW-511T / ISW-511TS15
4-Port 10/100Base-TX + 1-Port 100Base-FX Industrial Ethernet Switch
with Wide Operating Temperature (-40~75 degrees C)
Physical Port
• 4-port 10/100Base-TX RJ-45 with auto MDI / MDI-X function
for ISW-511T series
• 1-port 100Base-FX interface on ISW-511T for up to 2km
(multi-mode fiber 62.5/125μm, 50/125µm) transmission
distance
• 1-port 100Base-FX interface on ISW-511TS15 for up to 15km
(single-mode fiber 9/125µm) transmission distance
Layer 2 Features
• Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX,
Highly Convenient and Feasible Industrial Robust Switch
100Base-FX Ethernet standard
PLANET has upgraded two models named ISW-511T and ISW-511TS15 for use in
• Supports auto negotiation and 10/100Mbps half / full duplex
environments with wide operating temperature. The capital ‘T’ (ISW-511T and ISW-
511TS15) shown in the model names means that they can support and operate under mode for each copper port
WIDE-TEMPERATURE environment ranging from -40 up to 75 degrees C. As we know • High performance Store and Forward architecture
the temperature in many places and countries of the world are lower than -10 degrees • Prevents packet loss with back pressure (half-duplex) and
C, these two new models, ISW-511T and ISW-511TS15, will be the right products IEEE 802.3x pause frame flow control (full-duplex)
for Transportation, Manufacturing, Security and Surveillance network deployments in • Backplane (Switching Fabric): 1Gbps
those harsh environments. The ISW-511T / ISW-511TS15 also provides a high level of
• Integrated address look-up engine, supporting 2K absolute
immunity against electromagnetic interference and heavy electrical surges which are
usually found on plant floors or in curb side traffic control cabinets. MAC addresses
• 1Mbit on-chip frame buffer
• Automatic address learning and address aging
Flexibly Extendable Distance • CSMA / CD Protocol
They (the ISW-511T and ISW-511TS15) each include four 10/100Base-TX auto-
negotiation ports and one 100Base-FX port. The ISW-511T is equipped with 100Base-
FX multi-mode SC interfaces for transmission distance up to 2km while the ISW- Industrial Case / Installation
511TS15 is equipped with 100Base-FX single-mode SC interfaces for transmission • IP30 metal case / protection
distance up to 15km. Users can choose either model suitable for network deployment, • DIN rail and wall mount design
either for a long-distance (ISW-511TS15) or short-distance (ISW-511T) transmission.
• 12 to 48V DC, redundant power with polarity reverse
Easy Installation and Wide Range of Power Usages protection and connective removable terminal block for master
The ISW-511T and ISW-511TS15 are designed with a compact case that allows either and slave power
DIN rail or panel mounting for the efficient usage of cabinet space. It provides an • Supports EFT protection 6KV DC for power line
integrated power supply with a wide range of voltages for worldwide operation. It also • Supports 6KV DC Ethernet ESD protection
offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for • -40 to 75 degrees C wide operating temperature
high availability applications requiring dual or backup power inputs.
Data Sheet
1 1
Page2
ISW-511T / ISW-511TS15
Applications
Industrial Switch for High Performance Data Collection and Forwarding
The ISW-511T and ISW-511TS15 are equipped with four 10/100Mbps ports offering auto MDI / MDIX feature and one 100Base-FX optic-fiber SC interface
providing 1Gps non-blocking switch fabric and the 2K MAC address table so that they can perform wire-speed packets transfer without risk of packet loss.
The ISW-511T / ISW-511TS15, which come in the slim type IP30 metal, is ideal for the most heavy industrial demanding environments.
Weather Station Desert
IP Camera
ISW-511TS15 15km ISW-511TS15
IP Camera
100 100
15km
IP Camera IP Camera
Fiber
Switch
15km
100
Data Center
15km
ISW-511TS15 100 IP Camera
15km
100 ISW-511TS15
ISW-511TS15
Winter season of Country Steel Factory ISW-511T
100 100Base-FX Fiber-optic
100Base-TX UTP
Specifications
Model ISW-511T / ISW-511TS15
Hardware Specifications
Ports 4 x 10/100Base-TX, auto negotiation, auto-MDI / MDI-X
10Base-T : 2-pair UTP Cat. 3, 4, 5 cable (100meters, max.)
Cable
100Base-TX : 2-pair UTP Cat. 5 cable (100meters, max.)
Port 1 x 100Base-FX
ISW-511T: 50/125μm / 62.5/125μm fiber
Cable
ISW-511TS15: 9/125μm fiber
ISW-511T: Multi-mode
Mode
ISW-511TS15: Single-mode
Copper Interface ISW-511T: 2km
Distance
ISW-511TS15: 15km
ISW-511T: 1310nm
Wavelength
ISW-511TS15: 1310nm
ISW-511T: Max. -14dBm, Min. -20dBm
Launch Power
ISW-511TS15: Max. 0dBm, Min. -20dBm
ISW-511T: -32dBm
Receive Sensitivity
ISW-511TS15: -32dBm
ISW-511T: -14dBm
Max. Input Power
ISW-511TS15: 0dBm
Dimensions (W x D x H) 135 x 97 x 32 mm
Weight 436g
12~48V DC
Power Requirements
Redundant power with polarity reverse protection function
2
Page3
ISW-511T / ISW-511TS15
Power Consumption / Dissipation 13.7 watts / 46 BTU
Installation DIN rail kit and wall mount ear
Provides one relay output for power failure
Alarm
Alarm relay current carry ability: 1A @ DC 24V
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Buffer 1Mbit
Back pressure for half duplex,
Flow Control
IEEE 802.3x pause frame for full duplex
Switch Fabric 1Gbps
Throughput (Packet Per Second) 0.74Mpps @ 64Bytes
Standards Conformance
IEEE 802.3 Ethernet, 10Base-T
Standards Compliance IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX
IEEE 802.3x Flow Control
Operating: -40~75 degrees C
Temperature
Storage: -40~85 degrees C
Operating: 5~90%
Operating Humidity
Storage: 5~90% (Non-condensing)
Regulation Compliance FCC Part 15 Class A, CE
IEC60068-2-32 (Free fall)
Stability Testing IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Dimensions Side View
ISW-511T / ISW-511TS15
Front View
Bottom View Top View Rear View
P1 P2 FAULT
Mounting Kit
TX
100
5
LNK/ACT RX
DIN-Rail Kit
4
3
2
1
10/100
LNK/ACTISW-511T
Mounting Kit Dimensions ( unit = mm )
Ordering Information
ISW-511T 4+1 100FX Port Multi-mode Industrial Ethernet Switch - 2km (-40 ~ 75 degrees C operating temperature)
ISW-511TS15 4+1 100FX Port Single-mode Industrial Ethernet Switch - 15km (-40 ~ 75 degrees C operating temperature)
Related Product
ISW-621T 4+2 100FX Port Multi-mode Industrial Ethernet Switch ─ 2km (-40~75 degrees C operating temperature )
ISW-621TS15 4+2 100FX Port Single-mode Industrial Ethernet Switch ─ 15km (-40~75 degrees C operating Temperature )
ISW-621TF 4+2 100FX SFP Industrial Ethernet Switch (-40~75 degrees C operating Temperature )
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City C-ISW-511T / ISW-511TS15
231, Taiwan (R.O.C.)
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2014 PLANET Technology Corp. All rights reserved.
Email: sales@planet.com.tw www.planet.com.tw
3
40.00
28.00 48.80
28.00 18.00 28.00
53.50 53.50
18.00
46.50 48.80 39.70
97.10
87.80
39.77 25.80
9.20 135.00
87.80 7.00
15.20
32.00
30.00