産業用PoEスイッチ PLANET IGS-5225-4P2S

IGS-5225-4P2S L2+ Industrial 4-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Ethernet Switch Physical Port • 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection • One RJ45 console interface for basic management and setup Advanced Manageable PoE Solution for Hardened Environment Power over Ethernet PLANET IGS-5225-4P2S L2+ Industrial Managed PoE+ Switch, featuring 4 • Complies with IEEE 802.3at Power over Ethernet Plus/end- 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 2 100/1000X fiber ports in an IP40 rugged but compact-sized case, span PSE can be installed in any difficult environment without space limitation. It provides • Up to 4 IEEE 802.3af/802.3at devices powered user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 • Supports PoE power up to 36 watts for each PoE port switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 • Auto detects powered device (PD) ERPS Ring technology to improve the rapid self-recovery capability and PLANET • Circuit protection prevents power interference between intelligent PoE functions for controlling the PoE outdoor IP surveillance and ports wireless network applications. It is able to operate reliably, stably and quietly in the • Remote power feeding up to 100m temperature range from -40 to 75 degrees C. • PoE management features – Total PoE power budget control – Per port PoE function enable/disable – PoE admin-mode control – PoE port power feeding priority – Per PoE port power limit – PD classification detection • Intelligent PoE features – Temperature threshold control Redundant Ring, Fast Recovery for Critical Network Applications – PoE usage threshold control The IGS-5225-4P2S supports redundant ring technology and features strong, – PD alive check rapid self-recovery capability to prevent interruptions and external intrusions. – PoE schedule It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant Industrial Protocol power input system into customer’s industrial automation network to enhance • Modbus TCP for real-time monitoring in a SCADA system system reliability and uptime in harsh factory environments. In a simple Ring • IEEE 1588v2 PTP (Precision Time Protocol) network, the recovery time of data link can be as fast as 10ms. Office Industrial Case and Installation Factory • IP40 metal case 1000 Industrial MAN Switch • DIN-rail and wall-mount designs Industrial MAN Switch • 48~56V DC, redundant power with polarity reverse protect 1000 ERPS Ring for Metropolitan Area Network Application Recovery Time < 10ms function 1000 • Supports 6000V DC Ethernet ESD protection Highway PoE • -40 to 75 degrees C operating temperature PoE PoE PoE 1000 8-Port MAN Switch 1000 Industrial PoE Switch Industrial PoE Switch Control Center 1

IGS-5225-4P2S Cybersecurity Network Solution to Minimize Security Risks Layer 2 Features The cybersecurity feature that virtually needs no effort and cost to have includes • High performance of Store-and-Forward architecture, and the protection of the switch management and the enhanced security of the runt/CRC filtering eliminates erroneous packets to optimize mission-critical network. Both SSH and SSL protocols are utilized to provide strong protection against advanced threats. The network administrator can now construct the network bandwidth highly-secure corporate networks with considerably less time and effort than before. • Storm Control support – Broadcast/Multicast/Unicast Convenient and Smart ONVIF Devices with Detection Feature • Supports VLAN PLANET has newly developed an awesome feature -- ONVIF Support -- which is – IEEE 802.1Q tagged VLAN specifically designed for co-operating with video IP surveillances. From the IGS- – Up to 255 VLANs groups, out of 4094 VLAN IDs 5225-4P2S’ GUI, you just need one click to search and show all of the ONVIF – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) devices via network application. In addition, you can upload floor images to the – Private VLAN Edge (PVE) switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can – Protocol-based VLAN be controlled from the GUI. – MAC-based VLAN – Voice VLAN – GVRP (GARP VLAN Registration Protocol) • Supports Spanning Tree Protocol – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) – Maximum 2 trunk groups with 2 ports per trunk group – Up to 4Gbps bandwidth (duplex mode) • Provides port mirror (many-to-1) • Port mirroring to monitor the incoming or outgoing traffic on a particular port • Loop protection to avoid broadcast loops • Supports ERPS (Ethernet Ring Protection Switching) • Compatible with Cisco Uni-directional link detection(UDLD) that monitors a link between two switches and blocks the Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the ports on both ends of the link if the link fails at any point IGS-5225-4P2S features the following special PoE management functions: between the two devices ■ PD alive check • Link Layer Discovery Protocol (LLDP) ■ Scheduled power recycling ■ PoE schedule Layer 3 IP Routing Features ■ PoE usage monitoring • Supports maximum 32 static routes and route summarization Intelligent Alive Check for Powered Device The IGS-5225-4P2S PoE Switch can be configured to monitor connected PD’s Quality of Service status in real time via ping action. Once the PD stops working and responding, the • Ingress Shaper and Egress Rate Limit per port bandwidth IGS-5225-4P2S will recycle the PoE port power and bring the PD back to work. It control also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. • 8 priority queues on all switch ports 2

IGS-5225-4P2S Step 1 Step 2 • Traffic classification PD Status PT PoE Camera No Response...... – IEEE 802.1p CoS Good!! – IP TOS/DSCP/IP precedence Ping Request Ping Request – IP TCP/UDP port number Ping Echo Check alive status for 3 times – Typical network application Step 3 Step 4 • Strict priority and Weighted Round Robin (WRR) CoS Alarm Notification policies PoE PD Alive!! PoE • Supports QoS and In/Out bandwidth control on each port ON OFF ON ON • Traffic policing on the switch port Restart PoE device if without response • DSCP remarking PoE Schedule for Energy Saving Multicast Under the trend of energy saving worldwide and contributing to environmental • Supports IPv4 IGMP snooping v1, v2 and v3 protection on the Earth, the IGS-5225-4P2S can effectively control the power • Supports IPv6 MLD snooping v1 and v2 supply besides its capability of giving high watts power. The built-in “PoE schedule” • Querier mode support function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or • IGMP snooping port filtering enterprises save power and money. • MLD snooping port filtering • MVR (Multicast VLAN Registration) 8 AM 5 PM 5 PM 8 AM Security • Authentication – IEEE 802.1x Port-based/MAC-based network access authentication PoE PoE PoE PoE PoE PoE PoE PoE – Built-in RADIUS client to cooperate with the RADIUS servers Power Power Power Power Power Power Power Power On On On On Off Off Off On – TACACS+ login users access authentication 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts – RADIUS/TACACS+ users access authentication Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours Total Saved = 10800watts/month • Access Control List PoE 1000BASE-TX UTP with PoE – IP-based Access Control List (ACL) Scheduled Power Recycling – MAC-based Access Control List The IGS-5225-4P2S allows each of the connected PoE IP cameras or PoE • Source MAC/IP address binding wireless access points to reboot at a specific time each week. Therefore, it will • DHCP snooping to filter distrusted DHCP messages reduce the chance of IP camera or AP crash resulting from buffer overflow. • Dynamic ARP Inspection discards ARP packets with invalid Automatically Reboot MAC address to IP address binding S M T W T F S Every Friday 23:00 • IP Source Guard prevents IP spoofing attacks • IP address access management to prevent unauthorized CPU/Buffer Load 85% intruder PoE CPU/Buffer Management Load 10% • IPv4 and IPv6 dual stack management ON OFF ON PoE PT Camera • Switch Management Interfaces – Console/Telnet Command Line Interface SMTP/SNMP Trap Event Alert – Web switch management The IGS-5225-4P2S provides event alert function to help to diagnose the abnormal – SNMP v1 and v2c switch management device owing to whether or not there is a break of the network connection, or the – SSH/SSL and SNMP v3 secure access rebooting response. 3

IGS-5225-4P2S SMTP/SNMP Trap Event Alert • SNMP Management IGS-5225-8P4S – Four RMON groups (history, statistics, alarms, and E-mail Alert events) – SNMP trap for interface Link Up and Link Down Malfunction notification • IPv6 IP address/NTP/DNS management PoE PoE • Built-in Trivial File Transfer Protocol (TFTP) client • BOOTP and DHCP for IP address assignment • System Maintenance – Firmware upload/download via HTTP/TFTP PoE IP Camera PoE IP Camera – Reset button for system reboot or reset to factory default – Dual Images Effective Alarm Alert for Better Protection • DHCP Relay and DHCP Option 82 The IGS-5225-4P2S supports a Fault Alarm feature which can alert the users when • DHCP Server there is something wrong with the switches. With this ideal feature, the users would • User Privilege levels control not have to waste time finding where the problem is. It will help to save time and human resource. • Network Time Protocol (NTP) Fault Alarm Feature • SFP-DDM (Digital Diagnostic Monitor) • Network Diagnositc – ICMPv6/ICMPv4 Remote Ping Mail – Cable diagnostic technology provides the mechanism to detect and report potential cabling issues System Log • PLANET Smart Discovery Utility for deployment or management SNMP TRAP AC/DC Power RJ45/Fiber Connection Failure Link Down Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-4P2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-4P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-4P2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-4P2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 2 trunk groups with 2 ports per trunk group, and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch 4

IGS-5225-4P2S Efficient Management For efficient management, the IGS-5225-4P2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225-4P2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225- 4P2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH Powerful Security The IGS-5225-4P2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP Provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-4P2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 1588 Time Protocol for Industrial Computing Networks The IGS-5225-4P2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Time Synchronization in Network IGS-5225-4P2S Transparent Clock Grand Master Clock Slave Clock 1000 1000 1588 PTP 1588 PTP Base Station 1000 1000BASE-SX/LX Fiber-optic Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-4P2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. 5

IGS-5225-4P2S Intelligent SFP Diagnosis Mechanism The IGS-5225-4P2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Digital Diagnostic Monitor (DDM) Voltage 6 Ammeter 4 8 30 2 10 20 40 0 12 10 50 V 0 60 mA Temperature 50 25 75 0 100 °C 0 -20 20 0 -20 20 -40 40 -40 40 -60 60 -60 60 dBm dBm Power Transceiver Power Receiver Applications Industrial Area Department/Workgroup PoE Switch Providing up to 4 PoE+, in-line power interfaces, the IGS-5225-4P2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 4 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-4P2S makes the installation of IP cameras or wireless AP easier and more efficient. Extending Ethernet Distance Outdoor Outdoor IP Camera IP Camera Ethernet up to PoE PoE Ethernet up to 100 meters 100 meters Network Video Recorder 1000 1000 Fiber Optic Cable Fiber Optic Cable Gigabit Fiber Switch up to 120km up to 120km IGS-5225-4P2S IGS-5225-4P2S 240km 1000 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP PoE 1000BASE-T UTP with PoE 6

IGS-5225-4P2S Specifications Product IGS-5225-4P2S Hardware Specifications Copper Ports 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 2 1000BASE-SX/LX/BX SFP interfaces (Port-5 to Port-6) SFP/mini-GBIC Slots Compatible with 100BASE-FX SFP PoE Injector Port 4 ports with 802.3at/af PoE injector function with Port-1 to Port-8 Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 12Gbps/non-blocking Throughput (packet per second) 8.928Mpps@ 64 bytes packet Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4Mbits IEEE 802.3x pause frame for full duplex Flow Control Back pressure for half duplex Jumbo Frame 9Kbytes <5 sec: System reboot Reset Button >5 sec: Factory default ESD Protection 6KV DC Enclosure IP40 metal case Installation DIN-rail kit and wall-mount kit Removable 6-pin terminal block for power input Connector Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) Ring Owner (Green) LED Indicator Per 10/100/1000T RJ45 PoE+ Ports: PoE-in-Use (Orange) LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Dimensions (W x D x H) 50 x 87.8 x 135 Weight 610g Power Requirements Dual 48~56V DC (>51V DC for PoE+ output recommended) Max. 6.2 watts/26.76BTU (Power on without any connection) Power Consumption Max. 151.8 watts/520.82BTU (Full loading with PoE function) Power Over Ethernet PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget Dual power input: 144W maximum (depending on power input) Max. Number of Class 2 PDs 4 Max. Number of Class 3 PDs 4 Max. Number of Class 4 PDs 4 Layer 2 Function Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Port Configuration Flow control disable/enable Power saving mode control Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX/RX/both Port Mirroring 1 to 1 monitor 7

IGS-5225-4P2S IEEE 802.1Q tag-based VLAN, up to 255 VLAN groups IEEE 802.1ad Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) GVRP Up to 255 VLAN groups, out of 4094 VLAN IDs IEEE 802.3ad LACP/static trunk Link Aggregation Supports 2 trunk groups with 2 ports per trunk group Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IPv4 IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Snooping IPv4 IGMP querier mode support IPv6 MLD (v1/v2) snooping, up to 255 multicast groups MLD Snooping IPv6 MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 123 entries Per port bandwidth control Bandwidth Control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps RFC 1213 MIB-II IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) SNMP MIBs RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Layer 3 Function IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries IPv4 software static routing Routing Protocols IPv6 software static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol Standards Compliance IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 1588 PTPv2 8

IGS-5225-4P2S RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP Standards Compliance RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 ITU G.8032 ERPS Ring Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Diagram Top View Mounting Kit Side View Front View Side View Rear View P1 P2 Fault Ring R.O. Reset PoE Usage 120W Console 90W DIN-Rail Kit115200,N,8,1 1000 LNK ACT 60W 100 LNK ACT 30W 5 6 LNK ACT PoE-in-Use 3 4 1 2 IGS-5225-4P2S Mounting Kit Dimensions ( unit = mm ) 9 Fault max. Input DC 48~56V DC1 Fault DC2 load 1A@24V 28.00 [1.10] 40.00 [1.57] 50.00 [1.97] 18.00 [0.71] 53.50 53.50 18.00 46.50 48.80 39.70 97.10 87.80 87.80 135.00 9.20 15.20 50.00 30.00 107.00 33.55 18.00

IGS-5225-4P2S Ordering Information IGS-5225-4P2S L2+ Industrial 4-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) Related Products IGS-5225-8P4S L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 4-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) IGS-5225-8P2T2S Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T+ 2-Port 100/1000X SFP Managed Ethernet Switch Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP + 2-Port 10G SFP+ Managed Ethernet Switch IGS-5225-8P2S2X (-40~75 degrees C) IGS-5225-4T2S L2+ Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) Related Products ■ 1000Mbps SFP transceiver modules MGB-GT SFP-Port 1000BASE-T Module MGB-SX SFP-Port 1000BASE-SX mini-GBIC module - 550m MGB-SX2 SFP-Port 1000BASE-SX mini-GBIC module - 2km MGB-LX SFP-Port 1000BASE-LX mini-GBIC module - 10km MGB-L30 SFP-Port 1000BASE-LX mini-GBIC module - 30km MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module - 50km MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module - 70km MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km MGB-TSX SFP-Port 1000BASE-SX mini-GBIC module - 550m (-40 ~ 75 degrees C) MGB-TLX SFP-Port 1000BASE-LX mini-GBIC module - 10km (-40 ~ 75 degrees C) MGB-TL30 SFP-Port 1000BASE-LX mini-GBIC module - 30km (-40 ~ 75 degrees C) MGB-TL70 SFP-Port 1000BASE-LX mini-GBIC module - 70km (-40 ~ 75 degrees C) ■ 100Mbps SFP transceiver modules MFB-FX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km MFB-F20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km MFB-F40 SFP-Port 100BASE-FX Transceiver (1310nm) - 40km MFB-F60 SFP-Port 100BASE-FX Transceiver (1310nm) - 60km MFB-FA20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) - 20km MFB-FB20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) - 20km MFB-TFX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km (-40 ~ 75 degrees C) MFB-TF20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km (-40 ~ 75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGS-5225-4P2S 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 10