メディアコンバーター PLANET ICS-2200T/ICS-2400T

ICS-2200T/ICS-2400T Industrial RS232/RS422/RS485 Serial Device Server Serial Interface • Two/four DB9 interfaces support RS232, 2-wire RS485, 4-wire RS485 and RS422 operation • Asynchronous serial data rates up to 921600bps • Data mode including VCOM, RFC2217, TCP Server, TCP Client, UDP, Remote Pair and Serial Telnet modes Ethernet Interface • 2-port 10/100BASE-TX RJ45 interface with auto MDI/MDI-X Cost-effective Solution for RS232/422/485 Serial-to-Industrial Ethernet function Application • Ethernet ports support Ethernet switch or cascading operation PLANET ICS-2x00T Serial Device Server series is specially designed to convert for easy wiring RS232, RS422 or RS485 serial communication to Industrial Fast Ethernet networking so as to extend the network distance efficiently and inexpensively. There are two Management 10/100BASE-TX RJ45 ports available in the ICS-2x00T series for your network needs. The ICS-2x00T series is a time-saving and cost-effective solution for users • IPv4 and IPv6 dual stack management and system integrators to quickly transform their serial devices into the Ethernet • Remote Management Interfaces network with no need of replacing the existing serial devices and software system. – IP-based Web management – Telnet console management – Windows-based VCOM utility supports searching, monitoring and configuration setting • IP NTP (Network Time Protocol) and DNS management • Standard TCP/IP interface and versatile operation modes • Software Protocol supports ARP, ICMP, TCP/IP, UDP, HTTP server, DHCP client, Telnet server/client • Serial Operation mode selected via management interface • Pair Connection mode for connecting two serial devices over Convert Multiple Serial Devices to IP Networking a network IP Networking Serial Devices • Allows a max. of 4 hosts to be accessed as TCP client mode • Firmware upgrade via HTTP protocol Ethernet • Accessible IP security control to prevent illegal users TCP/IP Protocol Serial bus Workstation • Event notification Serial bus – Remote Syslog server RS232/422/485 ICS-2200T/ICS-2400T – SNMP trap Serial Device Server Series – Built-in buzzer – Relay output alarm Remote Management As the ICS-2x00T series provides an easy serial-to-Ethernet connectivity and – Digital Output (ICS-2400T) connection to a TCP/IP network, the remote network system can thus be managed • DHCP client for IP address assignment efficiently via its Web, telnet and VCOM management interfaces. It supports both • PLANET Smart Discovery utility automatically finds the client application and serial operation modes for alarm or IP address connection, which devices on the network saves the network administrator’s time in detecting and locating network problems without visual inspection of the cabling and devices. Multiple connection options are available for large networking environment as well. 1

ICS-2200T/ICS-2400T Remote Management Industrial Case and Installation ICS-2200T/ICS-2400T Serial Device Server Series • IP30 metal case (ICS-2200T) VCOM Utility • IP40 metal case (ICS-2400T) TCP/IP • DIN-rail and wall-mount designs Telnet • Redundant power design – 12 to 48V DC, redundant power with polarity reverse Web Browser protect function Stable Performance under Difficult Environments • Supports 6000 VDC Ethernet ESD protection The ICS-2x00T series provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors • -40 to 75 degrees C operating temperature or in curbside traffic control cabinets. Its operating temperature ranging from -40 • Free fall, shock-proof and vibration-proof for industries to 75 degrees C allows the ICS-2x00T series to be placed in almost any difficult • Supports extensive LED indicators for network diagnosis environment. • Reset button for reset to factory default The ICS-2x00T series, equipped with compact IP30/IP40 standard metal case, Digital Input and Digital Output (ICS-2400T) allows either DIN-rail or wall mounting for efficient use of cabinet space. The • 2 Digital Input (DI) ICS-2x00T series also provides an integrated power supply source with a wide range of voltages (12 to 48V DC) ideally suitable for worldwide operation with high • 2 Digital Output (DO) availability applications requiring dual or backup power inputs. • Integrate sensors into auto alarm system • Transfer alarm to IP network via email and SNMP trap Dual Power Input for High Availability Network System The ICS-2x00T series features a strong dual power input system with wide- ranging voltages (12V~48V DC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when Power Supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the ICS-2x00T series via Power Supply 2 without any break of operation. Non-stop Ethernet Service with Dual Power Input & Auto Failover 12V~48V DC 12V~48V DC 12V~48V DC 12V~48V DC DC DC DC DC Active Active Active Power Power 1 2 Power Power 1 2 Serial Device Serial Device Serial Device Serial Device ICS-2200T ICS-2200T DC Power Line (DC) |O|O| Serial Line (RS-XXX) Effective Alarm Alert for Better Protection The ICS-2x00T series comes with a Fault Alarm feature which can alert the users when there is something wrong with the Serial Device Server. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. The ICS-2x00T series provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. 2

ICS-2200T/ICS-2400T Fault Alarm Feature PWR1 PWR2 Buzzer DC DC or System Log SNMP TRAP DC/DC Power Failure RS232 Connection Failed via DCD/DSR Digital Input and Digital Output for External Alarm With digital input and digital output on its front panel, an external alarm can help users via the digital input to detect and log external device status (such as door intrusion detector), and then immediately send an event alarm to the administrator. The digital output can be used to alarm the administrator if the ICS-2400T serial port shows DCD, changed DSR or power failure. Applications Access Control System – Traditional System Application Most of the enterprises and government use access control plate and Mifare or RFID to authorize entrance identity. Traditionally, the access control machines use RS232 or RS485 serial interface with their cables connecting to login server. By applying the ICS-2x00T Serial Device Server series, the access control machine is able to extend the network over longer distances via Ethernet interfaces. In addition, the ICS-2x00T series can be linked to an xDSL router to get the internet access capability so that the access control can be set and monitored over the internet. 11F I/O Access Control Administration Department ICS-2400T Access I/O Control Ethernet Switch Account Authentication Server B1F I/O Access Control ICS-2200T 100BASE-TX UTP |O|O| Serial Line (RS-XXX) 3

ICS-2200T/ICS-2400T Process Control To monitor, configure and manage the robotic conveyer including other production machines, PLC (Programmable Logical Control) is required to drive the above manufacturing process. The ICS-2x00T series can be set to the TCP Server mode and connected to the PLC. Thus, the administrator can configure and set command settings through Fast Ethernet intranet to remotely control the PLC, without having to stand by the I/O machine. Factory I/O Bulletin Board ICS-2200T RS232/485 Converter Internet - TCP Server Control & Monitoring Center I/O I/O PLC ICS-2400T Conveyor System RS232/485 Converter - TCP Server Surveillance Motion Control – Pair Connection Mode Using pair connection mode via the fiber optical patch cord, the ICS-2x00T series can extend the distance of the deployed devices via RS232, RS422 and RS485 interfaces, making the remote management of these devices from the monitoring center easier and efficient. Remote Monitoring Center Public Area Intranet RS-485 RS-485 Control Keyboard Speed Dome ICS-2200T ICS-2200T Camera 100BASE-TX UTP RS-485 RS-485 4

ICS-2200T/ICS-2400T Drawing Top View Side View Front View Side View Rear View Mounting Kit PWR1 PWR2 Fault SYS E1 LNK/ ACT E2 LNK/ ACT P1 Rx Tx P1 DIN-Rail Kit RS232/422/485 P2 Rx Tx P2 Mounting Kit Bottom View Unit: mm Top View Mounting Kit Side View Front View Side View Rear View PWR1 PWR2 Fault SYS I/O E1 LNK/ ACT E2 LNK/ ACT P1 P3 Rx Tx Rx Tx P1 P3 DIN-Rail Kit RS232/422/485 P2 P4 Rx Tx Rx Tx P2 P4 Bottom View Mounting Kit Unit: mm 5 SYSTEM RESET System Reset Buzzer Reset BUZZER RESET 28.00 [1.10] 40.00 [1.57] 50.00 [1.97] 18.00 [0.71] 40.00 40.00 28.00 48.80 28.00 28.00 18.00 28.00 18.00 28.00 28.00 [1.10] 40.00 [1.57] 50.00 [1.97] 18.00 [0.71] 28.00 53.50 53.50 53.50 53.50 18.00 18.00 46.50 48.80 39.70 46.50 48.80 39.70 97.10 97.10 87.80 87.80 87.80 135.00 40.00 9.20 135.00 DI0 DI1 DO0 DO1 GND GND ICS-2400T 1A@24V 15.20 50.0032.00 V1+ V1- V2+ V2- DC Input: PWR1 Fault PWR2 12-48V , 1A max. V1+ V1- V2+ V2- DC Input: PWR1 Fault PWR2 12-48V , 1A max. 40.00 107.00 33.55 18.00

ICS-2200T/ICS-2400T Specifications Product ICS-2200T ICS-2400T Serial Interface Serial Ports 2 x DB9 male 4 x DB9 male Serial Standards RS232/RS422/4-wire RS485/2-wire RS485 Baud Rate (Data Rate) 50bps to 921Kbps Data Bits 5, 6, 7, 8 Parity Type 1, 1.5, 2 Stop Bit Odd, Even, None, Space, Mark RTS/CTS and DTR/DSR (RS232 only) Flow Control XON/XOFF RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS422: Tx+, Tx-, Rx+, Rx-, GND Signals 4-wire RS485: Tx+, Tx-, Rx+, Rx-, GND 2-wire RS485: Data A (+), Data B (-), GND Pin Assignment 2KV isolation protection Serial Line Protection 1KV (level 2) surge protection 15KV ESD protection Ethernet Interface Ethernet Ports 2 x RJ45 2 x RJ45 Standard 10/100BASE-TX Distance 100m Switch Architecture Store-and-Forward- Address Table 1K ESD Protection 6KV Surge Protection 2KV Hardware Installation DIN-rail kit and wall-mount ear Enclosure IP 30 metal IP40 metal Dimensions (W x D x H) 32 x 97 x 135 mm 56 x 87 x 135 mm Weight 477g 625g System: Power 1, Power 2, Fault, SYS System: Power 1, Power 2, Fault, SYS, I/O LED Indicators TP Port: Link/Active TP Port: Link/Active Serial Port: Tx and Rx Serial Port: Tx and Rx Power Requirements 12~48V DC, redundant power with polarity reverse protection function Full Loading Full Loading 12VDC: 0.326A (3.8 watts) 12VDC: 0.419A (5.1 watts) Power Consumption 24VDC: 0.176A (4.2 watts) 24VDC: 0.227A (5.4 watts) 48VDC: 0.114A (5.4 watts) 48VDC: 0.136A (6.5 watts) Removable 6-pin terminal block for power input Connector Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) DI and DO N/A Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24V DC, 100mA max. 6

ICS-2200T/ICS-2400T Provides one relay output for power failure Alarm Alarm relay current carry ability: 1A @ DC 24V < 5 sec: System reboot Reset Button > 5 sec: Factory default Management Web management Telnet Console management Management Interfaces Windows-based VCOM Utility management PLANET Smart Discovery Utility IP version IPv4 and IPv6 TCP Server TCP Client UDP Client Virtual COM Operation Mode RFC2217 Telnet Server Pair Connection – Remote (Slave) Pair Connection – Local (Master) Windows Base Only: Windows XP Windows Server 2003 Windows 7 Virtual COM Utility Platform Supports Windows Server 2008 Windows 8 (Must install the latest version of WinPcap) Windows Server 2012 (Must install the latest version of WinPcap) Windows 10 Alert Built-in buzzer and RTC Security Allow max. 4 accessible IP address hosts/ranges RFC1213 MIB-II SNMP MIBs RFC1317 RS232-like OIDs Standards Conformances FCC Part 15 Class A, Regulatory Compliance CE Certification Class A IEC60068-2-32 (Free fall) Stability Testing IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x flow control and back pressure RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 854 Telnet RFC 958 NTP Standards RFC 1591 DNS (client only) RFC 1908 SNMPv2c RFC 2068 HTTP RFC 2131 DHCP Client RFC 2732 Format for Literal IPv6 Addresses in URL's RFC 3315 DHCPv6 Client RFC 3513 IPv6 Addressing Architecture RFC 3596 DNSv6 RFC 4443 ICMPv6 EIA/TIA RS232/422/485 Regulatory Approval RoHS Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) 7

ICS-2200T/ICS-2400T Ordering Information ICS-2200T Industrial 2-port RS232/RS422/RS485 Serial Device Server w/ 2KV signal isolation ICS-2400T Industrial 4-port RS232/RS422/RS485 Serial Device Server w/ 2KV signal isolation Related Products ICS-2102 Industrial RS232/RS422/RS485 over 100BASE-FX Media Converter (Fiber, MM/2km) ICS-2102S15 Industrial RS232/RS422/RS485 over 100BASE-FX Media Converter (Fiber, SM/15km) ICS-2105A Industrial RS232/RS422/RS485 over 100BASE-FX Media Converter (Fiber, vary on SFP module) ICS-100 RS232/422/485 over Fast Ethernet Media Converter (RJ-45) – 100m ICS-102 RS232/422/485 over Fast Ethernet Media Converter (SC, MM) – 2km ICS-102S15 RS232/422/485 over Fast Ethernet Media Converter (SC, SM) – 15km ICS-105A RS232/422/485 over Fast Ethernet Media Converter (SFP) – vary on module PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City ICS-2200T/ICS-2400T 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2019 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 8