LCDスイッチ PLANET WGS-5225-8P2SV

WGS-5225-8P2SV Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch with LCD Touch Screen Physical Port • 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus/end- span PSE • Up to 8 IEEE 802.3af/802.3at devices powered • Supports PoE power up to 36 watts for each PoE port Wall-mount PoE Managed Switch with Advanced L2+/L4 Switching and Security • Auto detects powered device (PD) PLANET WGS-5225-8P2SV is an Industrial Wall-mount PoE Managed Switch with • Circuit protection prevents power interference between LCD Touch Screen featuring PLANET intelligent PoE functions to improve the ports availability of industrial applications. It provides IPv6/IPv4 dual stack management • Remote power feeding up to 100m and built-in L2+/L4 Gigabit switching engine along with eight 10/100/1000BASE-T • PoE management features ports featuring 36-watt PoE and two additional 1000BASE-X SFP ports. With – Total PoE power budget control a total power budget of up to 240 watts for different kinds of PoE applications, – Per port PoE function enable/disable and featuring networking speed and operating temperature ranging from -20 to 70 – PoE admin-mode control degrees C in a compact but rugged IP30 metal housing, the WGS-5225-8P2SV is – PoE port power feeding priority an ideal solution to meet the demand for the following network applications: – Per PoE port power limit ■ Building/Home automation network – PD classification detection ■ Internet of things (IoT) • Intelligent PoE features ■ IP surveillance – Temperature threshold control – PoE usage threshold control – PD alive check – PoE schedule Smart LCD Ground 3-pin Terminal Block Ring PWR V+ R.O. SYS Industrial Case and Installation 9 SFP PoE+ Fiber Managed Magnet Mounting 10 Ground 1000 LNK ACT • Compact size with fixed wall-mounted, magnetic wall-WGS-5225-8P2SV 100 LNK ACT DC Input Range 48-56V 2 4 6 8 mounted or DIN-rail design V+ • IP30 metal case LNK/ACT SFP PoE In-use • Supports -20 to 70 degrees C operating temperature 1 3 5 7 PoE 9 10 DC Input Range 48-56V • Supports ESD 6KV DC Ethernet protection • Dual power input design – 48V~56V DC wide power input with polarity reverse DC Plug-in 10/100/1000BASE-T RJ45 Ports 2 100/1000BASE-X SFP Ports protect function Intuitive LCD Control – 3-pin terminal block or DC jack connector The WGS-5225-8P2SV comes with an intuitive touch panel on its front panel that Layer 2 Features facilitates the Ethernet PoE PD management that greatly promotes management efficiency in large-scale networks, such as enterprises, hotels, shopping malls, • Prevents packet loss with back pressure (half-duplex) and government buildings, and other public areas. It also features the following special IEEE 802.3x pause frame flow control (full-duplex) management and status functions: • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth 1

WGS-5225-8P2SV • Storm Control support ■ IP address, VLAN and QoS configuration – Broadcast/Multicast/Unicast ■ PoE management and status ■ Port management and status, and SFP information • Supports VLAN ■ Troubleshooting: cable diagnostic and remote IP ping – IEEE 802.1Q tagged VLAN ■ Maintenance: reboot, factory default and save configuration – Up to 255 VLANs groups, out of 4094 VLAN IDs – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE) – Protocol-based VLAN – MAC-based VLAN – Voice VLAN • Supports Spanning Tree Protocol – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) Redundant Ring, Fast Recovery for Critical Network Applications – Maximum 2 trunk groups with 2 ports per trunk group The WGS-5225-8P2SV supports redundant ring technology and features strong, – Up to 2Gbps bandwidth (duplex mode) rapid self-recovery capability to prevent interruptions and external intrusions. • Provides port mirror (1-to-1) It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection • Port mirroring to monitor the incoming or outgoing traffic on Switching) technology, Spanning Tree Protocol (802.1s MSTP), and dual power a particular port input system into customer’s industrial automation network to enhance system • Loop protection to avoid broadcast loops reliability and uptime in harsh factory environments. In a certain simple ring • Supports ERPS (Ethernet Ring Protection Switching) network, the recovery time of data link can be as fast as 10ms. Layer 3 IP Routing Features Office • Supports maximum 32 static routes and route Factory summarization 1000 Industrial MAN Switch Quality of Service Industrial MAN Switch • Ingress Shaper and Egress Rate Limit per port bandwidth 1000 control ERPS Ring for Metropolitan Area Network Application Recovery Time < 10ms • 8 priority queues on all switch ports • Traffic classification 1000 – IEEE 802.1p CoS – IP TOS/DSCP/IP precedence PoE PoE PoE PoE – IP TCP/UDP port number 1000 8-Port MAN Switch – Typical network application 1000 Industrial PoE Switch Industrial • Strict priority and Weighted Round Robin (WRR) CoS Highway PoE Switch Control Center policies • Supports QoS and In/Out bandwidth control on each port • Traffic-policing on the switch port • DSCP remarking 2

WGS-5225-8P2SV Convenient and Smart ONVIF Devices with Detection Feature Multicast PLANET has newly developed an awesome feature -- ONVIF Support -- which is • Supports IGMP snooping v1, v2 and v3 specifically designed for co-operating with video IP surveillances. From the WGS- • Supports MLD snooping v1 and v2 5225-8P2SV’s GUI, you just need one click to search and show all of the ONVIF • Querier mode support devices via network application. In addition, you can upload floor images to the • IGMP snooping port filtering switch and can remotely monitor or inspect an assembly line. Moreover, you can • MLD snooping port filtering get real-time surveillance information and online/offline status; the PoE reboot can • MVR (Multicast VLAN Registration) be controlled from the GUI. Security • IEEE 802.1x Port-based/MAC-based network access authentication • Built-in RADIUS client to cooperate with the RADIUS servers • TACACS+ login users access authentication • RADIUS/TACACS+ users access authentication • IP-based Access Control List (ACL) • MAC-based Access Control List • Source MAC/IP address binding • DHCP snooping to filter distrusted DHCP messages • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks • IP address access management to prevent unauthorized intruder Management • Switch Management Interfaces – Telnet Command Line Interface Convenient and Smart ONVIF Devices with Detection Feature – Web switch management Built-in Unique PoE Functions for Powered Devices Management – SNMP v1 and v2c switch management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the – SSH/SSL and SNMP v3 secure access WGS-5225-8P2SV features the following special PoE management functions: – 2.4-inch color LCD touch screen ■ PD alive check • Four RMON groups (history, statistics, alarms, and events) ■ Scheduled power recycling ■ PoE schedule • IPv6 IP address/NTP/DNS management ■ PoE usage monitoring • Built-in Trivial File Transfer Protocol (TFTP) client • BOOTP and DHCP for IP address assignment Intelligent Powered Device Alive Check • Firmware upload/download via HTTP/TFTP The WGS-5225-8P2SV can be configured to monitor connected PD status in • DHCP Relay and DHCP Option 82 real time via ping action. Once the PD stops working and responding, the WGS- • User Privilege levels control 5225-8P2SV will resume the PoE port power and bring the PD back to work. It • Network Time Protocol (NTP) will greatly enhance the network reliability through the PoE port resetting the PD’s • Link Layer Discovery Protocol (LLDP) power source and reducing administrator management burden. • SFP-DDM (Digital Diagnostic Monitor) Step 1 Step 2 • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues PT PoE Camera No Response......PD Status Good!! • Reset button for system reboot or reset to factory default Ping Request • PLANET Smart Discovery Utility for deployment Ping Request Ping Echo Check alive status for 3 times management Step 3 Step 4 Alarm Notification PoE PD Alive!! PoE ON OFF ON ON Restart PoE device if without response 3

WGS-5225-8P2SV Scheduled Power Recycling The WGS-5225-8P2SV allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. Automatically Reboot S M T W T F S Every Friday 23:00 CPU/Buffer Load 85% PoE CPU/Buffer Load 10% ON OFF ON PoE PT Camera PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the WGS-5225-8P2SV can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours. 8AM 5PM 5PM 8AM PoE PoE PoE PoE PoE PoE PoE PoE Power Power Power Power Power Power Power Power Off Off Off On On On On On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Save 24 watts/hr during off-business hours Total consumption of 36 watts/hr Total Saved = 10800 Watts/month PoE 1000Base-T UTP with PoE Innovative Wall-mount Installation The WGS-5225-8P2SV is specially designed to be installed in a narrow environment, such as wall enclosure or electric weak box. The compact, flat and wall-mounted design fits easily in any space-limited location. It adopts the user-friendly “Front Access” design, making the installing, cable wiring, LED monitoring and maintenance of the WGS-5225-8P2SV placed in an enclosure very convenient for technicians. The WGS-5225-8P2SV can be installed by fixed wall mounting, magnetic wall mounting or DIN rail, thereby making its usability more flexible. 4

WGS-5225-8P2SV SMTP/SNMP Trap Event Alert The WGS-5225-8P2SV provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. SMTP/SNMP Trap Event Alert WGS-5225-8P2SV E-mail Alert Malfunction PoE PoE PoE IP Camera PoE IP Camera Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the WGS-5225-8P2SV not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The WGS-5225-8P2SV can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The WGS-5225-8P2SV provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the WGS-5225-8P2SV allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 2 trunk groups with 2 ports per trunk group, and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Efficient Management For efficient management, the WGS-5225-8P2SV is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the WGS-5225-8P2SV offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the WGS-5225-8P2SV can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH 5

WGS-5225-8P2SV Powerful Security The WGS-5225-8P2SV offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the WGS-5225-8P2SV can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. Flexibility and Extension Solution The additional two mini-GBIC slots built in the WGS-5225-8P2SV support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single- mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The WGS-5225-8P2SV supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Digital Diagnostic Monitor (DDM) Voltage 6 4 Ammeter8 2 10 30 20 40 0 12 V 10 50 0 60 mA Temperature 50 25 75 0 100 °C 0 −20 20 −40 40 0 −20 20 −60 60 −40 40 dBm −60 60 dBm Power Transceiver Power Receiver 1588 Time Protocol for Industrial Computing Networks The WGS-5225-8P2SV is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. 6

WGS-5225-8P2SV Applications Security Building Automation Switch Suitable for buildings where security is strictly to be enforced, the WGS-5225-8P2SV offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-5225-8P2SV, a tightly-controlled network can be easily had in no time. PoE Wireless AP PoE IP Camera PoE VoIP Gigabit Ethernet Switch PoE PoE PoE Internet 1000 Core WGS-5225-8P2SV Fiber Switch PoE PoE PoE 1000BASE-T UTP with PoE |O|O| 1000BASE-T UTP 100BASE-TX UTP 1000 1000BASE-SX/LX Fiber-optic |O|O| Serial Line (RS-XXX) Security Serial Server PoE Access PoE IP Camera Gate Wireless AP Control Different Networks Managed by One Control Center Providing up to 8 PoE+, in-line power interfaces, the WGS-5225-8P2SV can centrally manage power supplying to an industrial network system where IP phones, IP cameras, wireless APs and more are built. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the WGS-5225-8P2SV makes the installation of IP cameras and wireless APs easier and more efficient. Extending Ethernet Distance Outdoor Outdoor IP Camera IP Camera Ethernet up to PoE PoE Ethernet up to 100 meters 100 meters Network Video Recorder 1000 1000 Fiber Optic Cable Fiber Optic Cable Gigabit Fiber Switch up to 120km up to 120km WGS-5225-8P2SV WGS-5225-8P2SV 240km 1000 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP PoE 1000BASE-T UTP with PoE 7

WGS-5225-8P2SV Specifications Product WGS-5225-8P2SV Hardware Specifications Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 to Port-10) SFP+ Slots Compatible with 100BASE-FX SFP PoE Injector Port 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8 Switch Architecture Store-and-Forward Switch Fabric 20Gbps/non-blocking Throughput (packet per second) 14.88Mpps@ 64 bytes packet Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4Mbits IEEE 802.3x pause frame for full duplex Flow Control Back pressure for half duplex Jumbo Frame 9Kbytes < 5 sec: System reboot Reset Button > 5 sec: Factory default ESD Protection 6KV DC Enclosure IP30 metal case Installation DIN rail kit and wall-mount Removable 3-pin terminal block for power input - Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-) Connector - Pin 3 for earth ground DC power jack with 2.0mm central pole System: PWR(Green) Ring (Green) Ring Owner (Green) Per 10/100/1000T RJ45 PoE+ Ports: LED Indicator PoE-in-Use (Orange) LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Dimensions (W x D x H) 180 x 24.4 x 140 mm Weight 686g Power Requirements Dual 48~56V DC (>51V DC for PoE+ output recommended) Max. 7.2 watts/24.7BTU (Power on without any connection) Power Consumption Max. 251 watts/861.2BTU (Full loading with PoE function) Management Function PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget 240W maximum (depending on power input) Max. number of Class 2 PDs 8 Max. number of Class 3 PDs 8 Max. number of Class 4 PDs 8 Layer 2 Function Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Port Configuration Flow control disable/enable Power saving mode control Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX/RX/both Port Mirroring 1 to 1 monitor 8

WGS-5225-8P2SV 802.1Q tag-based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs IEEE 802.3ad LACP/static trunk Link Aggregation Supports 2 trunk groups with 2 ports per trunk group Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Snooping IGMP querier mode support MLD (v1/v2) snooping, up to 255 multicast groups MLD Snooping MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 256 entries Per port bandwidth control Bandwidth Control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps RFC 1213 MIB-II IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) SNMP MIBs RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Layer 3 Function IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries IPv4 software static routing Routing Protocols IPv6 software static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.1ab LLDP IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3af Power over Ethernet IEEE 802.3z Gigabit SX/LX IEEE 802.3at Power over Ethernet Plus IEEE 802.3ab Gigabit 1000T ITU-T G.8032 Ethernet Ring Protection Switching IEEE 802.3x flow control and back pressure RFC 768 UDP IEEE 802.3ad port trunk with LACP RFC 793 TFTP Standards Compliance IEEE 802.1D Spanning Tree Protocol RFC 791 IP IEEE 802.1w Rapid Spanning Tree Protocol RFC 792 ICMP IEEE 802.1s Multiple Spanning Tree Protocol RFC 2068 HTTP IEEE 802.1p Class of Service RFC 1112 IGMP v1 IEEE 802.1Q VLAN tagging RFC 2236 IGMP v2 IEEE 802.1X Port Authentication Network Control 9

WGS-5225-8P2SV Environment Operating Temperature -20 ~ 70 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Drawing Smart LCD Ground Ring PWR V+ R.O. SYS 9 SFP PoE+ Fiber Managed Magnet Mounting 10 1000 LNK ACT WGS-5225-8P2SV 100 LNK ACT DC Input Range 48-56V 2 4 6 8 LNK/ACT SFP PoE In-use 1 3 5 7 PoE 9 10 Reset 9 10 Dimensions (unit = mm) 10

WGS-5225-8P2SV Ordering Information Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch with LCD Touch WGS-5225-8P2SV Screen Related Products WGS-5225-8T2SV Industrial L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Wall-mount Managed Switch with LCD Touch Screen WGS-5225-8P2S Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City WGS-5225-8P2SV 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 11