再生可能エネルギー対応PoEスイッチPLANET BSP-360

BSP-360 Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch Key FeatuPrheyssical Port • 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port 1 to Port 4) • RJ45 type interface for basic management and setup • USB type A female for setting file backup and restore Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE • Backward compatible with IEEE 802.3af Power over Ethernet Industry-leading Integration of PoE Technology and Renewable • Up to 4 ports of IEEE 802.3af/802.3at devices powered Power System • Supports PoE power up to 30 watts for each PoE port PLANET’s newly-launched Renewable Energy Industrial 802.3at PoE Managed • Auto detects powered device (PD) Ethernet Switch, BSP-360, is designed for deploying a surveillance or wireless • Circuit protection prevents power interference between network and remotely monitoring and managing the IP-based devices. Based ports on its green technology, the BSP-360 can be charged by the inexhaustible and • Remote power feeding up to 100 meters natural source of energy, such as solar, wind and hydroelectric power to conserve • PoE management energy so as to economically power these remote IP cameras and wireless – Total PoE power budget control APs, especially used for such expansive applications as dams, forests, deserts, – Per port PoE function enable/disable national parks, nature/animal protection areas and highways. – PoE port power feeding priority – Per PoE port power limitation – PD alive-check – PoE schedule Battery Management • Battery type option: Nickel-cadmium battery or lead-acid battery • Easy diagnostic of the system operating status via LED indicator • Battery current usage and status Zero-Carbon and Stable Power Supply • Battery capacity and power consumption statistics The BSP-360 utilizes the solar power sourcing and co-works with the common • Low voltage cut-off protection: Send alert and cut off the nickel-cadmium battery or lead-acid battery to form an independent solar power low priority PoE port for the low power battery supply system for outdoor network system. The BSP-360 delivers zero-carbon • Pulse Width Modulation (PWM) Protection and uninterruptible PoE power supply for continuous outdoor wireless and IP – Reverse current protection to prevent the current surveillance applications without the need of any cabling. It can power the client devices and can be charged at the same time during the day to enable to circuits from flowing back to the PV panel continue the operation at night. – Over-current and over-temperature protection – Reverse polarity protection (for battery and charging Renewable Power Source electrodes) 24V~45V DC IN 51V DC PoE+ Industrial Case & Installation • IP30 aluminum case 802.3af/802.3at PoE Compliant PD Device • DIN-rail and wall-mounted design • Supports -10 to 60 degrees C operating temperature 24V Battery IN/OUT 24V DC Output Data Sheet Nickel-cadmium or Lead-acid Battery 1 1

BSP-360 Built-in Unique Power Functions for Battery Management • Supports ESD 6KV DC Ethernet protection As it is the power managed for battery and power consumption, the BSP-360 • Redundant power design features the following special power management functions: – 24V~45V DC wide power input ■ Battery current usage and status ■ Battery capacity statistics ■ Low voltage cut-off protection Switching • Hardware based 10/100Mbps (half/full duplex), Battery Current Usage status and Statistics 1000Mbps (full duplex), auto-negotiation and auto MDI/ The administrator can remotely access the BSP-360 to know the power status of MDI-X the battery and renewable energy, and the estimated time of power consumption. • Features Store-and-Forward mode with wire-speed filtering and forwarding rates 75 100 50 100 • IEEE 802.3x flow control for full duplex operation and 80 back pressure for half duplex operation 0 150 60 Watt 40 • 8K MAC address table size 20 • Automatic address learning and address aging PoE Consumption 0 Router • Internet types: Dynamic IP, static IP, PPPoE, L2TP, 100% PPTP • Static and dynamic (RIP1 and 2) routing 50% • IP/MAC-based bandwidth control 20% • Supports Port Forwarding, DMZ, UPnP and Dynamic Battery Status DNS for various networking applications • 802.1d STP and IGMP Proxy Low Voltage Cut-Off Protection If the power is too low to empower the system and IP devices, the system will Security automatically power off the device with low priority to make sure the system works • Port filtering lets you either allow or prevent which normally, and an alert is then sent to the administrator at the same time. applications can access the Internet. • MAC filtering allows you to include or exclude computers Status A: Normal Operation and devices based on their MAC address DC • URL filtering allows you to control access to Internet websites in an URL list 80% • IP source guard prevents IP spoofing attacks PoE • DoS attack prevention ON Management Status B: Middle Battery Capacity • Switch Management Interface Alarm Notification – IPv4 Web switch management – SNMP v1, v2c • Static and DHCP for IP address assignment DC • System Maintenance – Firmware upload/download via HTTP 50% PoE – Configuration upload/download through HTTP Detect ON – Hardware reset button for system reboot or reset to factory default • NTP Network Time Protocol Status C: Low Battery Capacity • SNMP trap for interface Link Up and Link Down DC notification • Event message logging to remote syslog server • PLANET Smart Discovery Utility Cut Low Priority 20% OFF 2

BSP-360 Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the BSP-360 features the following special PoE management functions: ■ PD alive check ■ Scheduled power recycling ■ PoE schedule ■ PoE usage monitoring Intelligent Powered Device Alive Check The BSP-360 can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the BSP-360 will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden. Step 1 Step 2 No Response...... PD Status PT PoE Camera Good!! Ping Request Ping Request Ping Echo Check alive status for 3 times Step 3 Step 4 Alarm Notification PoE PD Alive!! PoE ON OFF ON ON Restart PoE device if without response Scheduled Power Recycling The BSP-360 allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. Automatically Reboot S M T W T F S Every Friday 23:00 CPU/Buffer Load 85% PoE CPU/Buffer Load 10% ON OFF ON PoE PT Camera PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the BSP-360 can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours. 8AM 5PM 5PM 8AM PoE PoE PoE PoE PoE PoE PoE PoE Power Power Power Power Power Power Power Power Off Off Off On On On On On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Save 24 watts/hr during off-business hours Total consumption of 36 watts/hr Total Saved = 10800 Watts/month PoE 1000BASE-T UTP with PoE 3

BSP-360 PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage Via the power usage chart in the web management interface, the BSP-360 enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the BSP-360 helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication. Called “PoE Power Usage”, the front panel of the BSP-360 has three LED indicators of different power usages. Friendly and Secure Management For efficient management, the BSP-360 is equipped with web and SNMP management interfaces. With the built-in web-based management interface, the BSP-360 offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. 4

BSP-360 Applications Solar PoE Power Supply for Long Distance Wireless Surveillance Solution Providing Plug-and-Play instant Internet service, the BSP-360 can be deployed anywhere in the city where there is no direct AC electricity. With PoE over the Cat5 cable, wireless AP and SFP media converter, you can check the current energy consumption and battery status in your office within the configuration interface of the BSP-360. SOHO / Home-Use Gigabit Ethernet PoE Network Deployment With its expanded home-use feature, the BSP-360 Renewable Energy PoE Switch helps SOHO / home users to create an integrated network where power is so easily utilized for transmission of data and video. It integrates IEEE 802.3at PoE technology and renewable power system. The wireless AP and PoE IP camera devices work perfectly with the BSP-360, which injects power through the Ethernet cables, thus helping SOHO / home users to build a cost-effective and reliable PoE networking environment easily. Power Source DC PoE N N PoE PoE Light PoE PoE Wireless AP DC PoE Battery Door Phone Renewable Energy PoE Switch IP Camera BSP-360 DC Power Line (DC) PoE 1000BASE-T UTP with PoE N 2.4GHz 802.11n 5

BSP-360 Wireless Connection for Outdoor Long-range Application With the four 802.3at/802.3af PoE interfaces, the BSP-360 enables you to install the PoE access point in the outdoors freely. When functioning with a pair of the wireless transmission, the BSP-360 Renewable Energy PoE Switch can be efficiently managed from remote monitor center. It enables the wireless LAN deployment to become more flexible and worry-free from the power outlet locations.** Solar PV PoE Lighting DC Wireless CPE/AP N Outdoor IP Camera PoE PoE PoE Solar PV DC PoE BatteryWireless CPE/AP Battery N BSP-360 PoE PoE PoE Switch PV:3 B 6a Vt.:25V Remote Web Management Control Center DC Power Line (DC) N 5GHz 802.11n 1000BASE-T UTP PoE 1000BASE-T UTP with PoE **To get the best performance, match it with PLANET devices for outdoor wireless bridge applications. Enables Extension of Network Deployment with Fiber Media Converter With the 24VDC out interface, the BSP-360 enables you to supply power to other device, such as PLANET IGT-905A, that fiber media converter where high- speed and stable data transmission can be made to a remote core network. It can extend the distance to Max. 120 kilometers between BSP-360 and control center via Fiber-Optic Link. Wind Power Wind Power DC Power Line (DC) 1000 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP PoE 1000BASE-T UTP with PoE Control Center DC DC 1000 DC:4 B 5a Vt.:24V Fiber Switch Remote Web Management 1000 1000 1000 DC DC DC DC Battery BSP-360 Battery BSP-360 PoE PoE DC DC Outdoor Outdoor IP Camera IP Camera 1000 1000 1000 SFP Media SFP Media Converter Converter 6

BSP-360 Specifications Product BSP-360 Hardware Specifications LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5, bridge mode) Copper Ports WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode) PoE Injector Port 4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port 4) USB 1 USB Type A female for setting backup 4 PoE out 51VDC; max. 30 watts per PoE port Power Output 2 DC out 24@ 1A maximum (four-pin terminal block) * The voltage of DC out is based on the battery. Switch Architecture Store-and-Forward Switch Fabric 10Gbps/non-blocking Switch Throughput@64 bytes 5.95Mpps@64 bytes MAC Address Table 8K entries Shared Data Buffer 512Kbit IEEE 802.3x pause frame for full-duplex Flow Control Back pressure for half-duplex < 5 sec: System reboot Reset Button > 5 sec: Factory default 3 LEDs for System and Power: ■ Green: Power ■ Green: Fault ■ Green: System 4 LEDs for PoE Copper Ports (Port 1~Port 4): LED ■ Green: LNK/ACT ■ Orange: PoE-in-use 1 LED for 10/100/1000T Copper Port (Port 5): ■ Green: LNK/ACT 3 LEDs for PoE Power Usage (W) ■ Green: 50, 100 and 120W Removable 6-pin terminal block Connector Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery 1 Digital Output (DO): Level 0: -24V~2.1V (±0.1V) Alarm Level 1: 2.1V~24V (±0.1V) Open collector to 24V DC, 100mA max. PV in: 24~45V DC Power Requirements Battery in/out: 24V DC 5.04 watts, 17.1BTU (Standby without PoE function) Power Consumption/ Dissipation 6.96 watts, 23.7 BTU (Full loading without PoE function) 135.36 watts, 461.5 BTU (Full loading with PoE function) Dimensions (W x D x H) 84 x 107 x 152 mm Weight 1026g ESD Protection 6KV DC Enclosure IP30 aluminum case Installation DIN-rail kit and wall-mount ear Power over Ethernet PoE Standard IEEE 802.3af/802.3at Power over Ethernet PSE PoE Power Supply Type End-span Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af) PoE Power Output Per port 51V DC, 535mA. Max. 30 watts (IEEE 802.3at) Power Pin Assignment 1/2 (+), 3/6 (-) PoE Power Budget 120 watts (PoE consumption + DC out and depending on power input) Max. Number of Class 2 PDs 4 Max. Number of Class 3 PDs 4 Max. Number of Class 4 PDs 4 Electrical Characteristics System Voltage Rating 24V DC Maximum Charging Current 6A Max. Solar Array VOC 60V DC Max. Operating Voltage 45V DC While operating -32mA Total Current Consumption At idle -11mA 7

BSP-360 100 degrees C disconnect solar and load High Temperature Shutdown 80 degrees C reconnect solar and load Battery Charging Characteristics Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating Charge Algorithm charge with PWM protection. Maximum Output Current 6A ± 40 mV/degrees Celsius for NiCad type batteries; charge cut-off @ 55 degrees C Nickel-cadmium Battery (Temperature compensation baseline@ 25 degrees C) Lead Acid Battery ± 60 mV/degrees Celsius for lead acid type batteries; charge cut-off @ 55 degrees C (Default Setting) (Temperature compensation baseline@ 25 degrees C) Float Charge Voltage DC 27.2V (26.0~30.0V) Absorption Charge Voltage DC 29.2V (28.0~32.0V) LVD (Low Voltage Disconnection) DC 22.2V (21.0~25.0V) LVR (Low Voltage Reconnection) DC 24.8V (23.0~27.0V) Router Features Shares data and Internet access with users, supporting the following internet accesses: ■ PPPoE ■ Dynamic IP Internet Connection Type ■ Static IP ■ PPTP ■ L2TP NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting Port Forwarding, and DMZ Firewall Built-in firewall with IP address/MAC address/Port/ URL filtering Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection Routing Protocol Static/Dynamic (RIP1 and 2) routing VPN Pass-through PPTP, L2TP, IPSec, IPv6 Built-in DHCP server supporting static IP address distribution Supports UPnP, Dynamic DNS LAN Supports IGMP Proxy Supports 802.1d STP (Spanning Tree) IP/MAC-based bandwidth control Management Setup of system/management functions Management Interface Web firmware upgrade SNMP trap for alarm notification of events Power limit by consumption and allocation PoE admin mode Per port power schedule Per port power enable/disable PoE Management Power feeding priority Current per port usage and status Total power consumption PD alive check Scheduled power recycling Battery current usage and status Battery Management Battery capacity statistics Low Voltage Cut-Off Protection Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.3af Power over Ethernet Standards Compliance IEEE 802.3at Power over Ethernet Plus RFC 768: UDP RFC 791: IP RFC 2068 HTTP RFC 1157: SNMP v1 RFC 1902: SNMP v2c RFC 5424: Syslog 8

BSP-360 Environment Temperature: -10 ~ 60 degrees C Operating Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 70 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing) Ordering Information BSP-360 Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch Related PoE Products BSP-300 Industrial Solar Power PoE Switch ICA-E3550V 5 Mega-pixel Bullet IR PoE IP Camera with Extended Support ICA-E5550V 5 Mega-pixel Vandalproof IR PoE IP Camera with Extended Support ICA-E6260 2 Mega-pixel PoE Plus Speed Dome IP Camera with Extended Support ICA-M3380P H.265 3 Mega-pixel Bullet IR IP Camera with Remote Focus and Zoom ICA-M5380P H.265 3 Mega-pixel Vandalproof IR IP Camera with Remote Focus and Zoom ICA-2250VT Industrial PoE Plus Outdoor IR IP Camera ICA-3250 1080p IR Bullet PoE IP Camera ICA-4250 1080p IR Dome PoE IP Camera ICA-W3250V Full HD Outdoor IR Wireless IP Camera ICA-HM620 2 Mega-pixel PoE Plus Speed Dome Internet Camera WNAP-7350 5GHz 300Mbps 802.11a/n Outdoor Wireless Access Point (2 x N-type Connector) WNAP-6350 2.4GHz 300Mbps 802.11n Outdoor Wireless Access Point (2 x N-type Connector) IGT-1205AT Industrial 10/100/1000T to 2-port 100/1000X SFP Media Converter IGT-805AT Industrial 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter (-40~75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City BSP-360 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 9