産業用PoEスイッチPLANET IPOE-171-60W

IPOE-171-60W Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts, -40~75 degrees C, 48~56V DC) Interface • 2 RJ45 interfaces – 1-port Data + Power output – 1-port Data input • 1 terminal block for master and slave power input. (Power Range: 48 ~ 56V DC redundant power) • 1 PoE mode (standard/legacy) DIP switch Advanced Industrial 802.3bt Ultra PoE Network Solution PLANET IPOE-171-60W is a Single-Port, Industrial 802.3bt Power over Power over Ethernet Ethernet Injector with a maximum of up to 60 watts of power output over • Complies with IEEE 802.3af/at/bt PoE end-span/mid-span Ethernet cables. PSE • Supports PoE power up to 60 watts for PoE port • Auto-detection of PoE IEEE 802.3at/bt equipment and devices from being damaged by incorrect installation • Monitors the status of the total PoE usage in real time • Remote power feeding up to 100m • Auto-detection of DC input voltage Hardware • IP30 slim-type metal case It is designed specifically to meet the demand for growing higher power required network equipment such as: • LED indicators for Power LED , PoE-in-Use LED and PoE Usage LED – Lighting – All-in-one touch PC – Remote digital signage display Industrial Case and Installation – Other network devices that need higher power to work normally • Solid wall mount or DIN-rail mount installation • Supports 6KV DC Ethernet ESD protection • -40 to 75 degrees C operating temperature 802.3bt 60~95W Thin POS Digital Health Lighting Client System Signage Care 802.3at 30W Door PTZ 11ac Phone Camera Wi-Fi AP 802.3af 15W IP Phone IP Camera 1

IPOE-171-60W The IPOE-171-60W delivers the Ethernet digital data with DC power over the twisted-pair cables as a 60-watt Power over Ethernet Injector, and the connected ultra Power over Ethernet splitter, the IPOE-171S, will separate the digital data and the power into three optional outputs (12V/24V DC) with distance up to 100 meters. 60 watts of Power over 4-pair UTP The IPOE-171-60W and IPOE-171S Ultra PoE solutions use the same cabling standard such as IEEE 802.3af/at PoE. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling. IPOE-171-60W Power End-span 10/100/1000Mbps Data Mid-span Cat 5E: 4-pair UTP 60W Power over Ethernet 10/100/1000Mbps Data Ultra PoE Injector 12V/24V Ultra PoE Splitter PoE Standard IEEE 802.3af (802.3at Type 1) IEEE 802.3at (802.3at Type 2) IEEE 802.3bt(802.bt Type 3) Maximum Power delivered by PSE 15.4 watts 30 watts 60 watts Power Available at PD 12.95 watts 25.5 watts 51 watts Voltage Range 48V 50~57V 50~57V Twisted-pair Used 2-pair 4-pair Supported Modes End-span or Mid-span End-span + Mid-span Supported Cabling Cat. 3/5/5e/6 Cat. 5e/6 Intelligent LED Indicator for Power Input and Real-time PoE Usage The IPOE-171-60W helps users to monitor the current status of power input and PoE power usage easily and efficiently via its advanced LED indication. “Power Input” allows user to know the status of power input. “PoE Power Usage” displayed on the panel of the IPOE-171-60W has three LED indicators of different power usages. Via the power usage LED, the IPOE-171-60W enables the administrator to monitor the status of the power usage of the connected PDs in real time. 2

IPOE-171-60W High compatibility and Compact Size Design Without It is easy to install the PoE injector by way of Plug and Play and comes with simple troubleshooting, making it easy for industrial users to own it. Besides, the IPOE-171-60W comes in compact housing, and provides two DC redundant power inputs, two power LEDs, fault LED and PoE-in-use LED. Two RJ45 ports -- Ethernet port and Ethernet + DC port – are on the front panel. Moreover, the IPOE-171-60W, when switched to the legacy mode, provides power to those PD devices which do not fully follow the IEEE 802.3at/bt standard. It is helpful to enhance the compatibility of IPOE-171-60W with other PDs. Simply plug in the Ethernet cables and DC power wire, and the IPOE-171-60W is ready to provide high-speed network communication and the 802.3bt PoE injector functions simultaneously with no need of software configuration. Redundant Power Input 48~56V DC 10/100/1000BASE-T 802.3af/at/bt 45~53V DC PoE PoE Compliant PD Device 10/100/1000BASE-T Redundant Power of 48~56V DC Input to 45~53V DC PoE Output 10/100/1000Mbps Ethernet Data Rate Quick and Easy Cabling Installation for PoE Network Deployment Backward compatible with both 802.3af/at PoE standards, the IPOE-171-60W allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The IPOE-171-60W frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time. Power Powered Device PoE IP Camera PDoawtaer 10/100/1000Mbps Ethernet Switch 60W PoE Wireless AP Power PDoawtaer RJ45 UTP Cable IPOE-171-60W Ultra PoE Splitter 3

IPOE-171-60W Stable Operating Performance under Difficult Environments Today, the PoE demand expands from commercial applications to many critical networks in the harsh environment. The IPOE-171 series will be one of the ideal solutions that provide a high level of immunity against electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curb-side traffic control cabinets. The IPOE-171 series can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network. The IPOE-171 series is also equipped with a compact IP30 standard metal case that allows either DIN-rail or wall mounting for efficient use of cabinet space. Non-PoE IP Camera DC IPOE Splitter Monitor IPOE-171-60W Gigabit Switch PoE Power Data 100 meters DC Power Line (DC) 1000BASE-T UTP PoE 1000BASE-T UTP with PoE Applications Installation of 802.3bt PoE Injector Due to the backward capability of IEEE 802.3af/at PoE standard, the IPOE-171-60W can directly connect with any IEEE 802.3af/at end-nodes, such as PTZ (Pan, Tilt & Zoom) speed dome IP cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. 100 meters DC Input Power DC Supply Power 75 ℃ -40 ℃ Data Power Data PoE PTZ Industrial PoE IP Camera Switch IPOE-171 Series 1000BASE-T UTP PoE 1000BASE-T UTP with PoE DC Power Line (DC) 4

IPOE-171-60W Installation of 802.3bt PoE Injector and Splitter For a place which is hard to find the power inlet, the IPOE-171-60W and IPOE-171S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input, such as PTZ network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points installed on the top of the building or used in enterprise office or home. 100 meters DC Input Power DC Supply Power 75 ℃ -40 ℃ Industrial 802.3bt PoE Splitter Data Power Data Digital Signage Industrial PoE Switch Data IPOE-171 Series DC Power 1000BASE-T UTP 12V/24V DC Output PoE 1000BASE-T UTP with PoE DC Power Line (DC) Extended Installation of IEEE 802.3bt Injector and PoE Network Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and also the long-distance IP camera distribution, the IPOE-171-60W and PLANET PoE Extender, IPOE-E172, can be a quick and cost-effective option. In the simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the IPOE-171-60W. The IPOE-171-60W delivers PoE power over the first 100 meters to the PoE Extender over UTP cables, and then the PoE Extender forwards the Ethernet data and remaining PoE power to the remote PoE IP cameras. 100 meters 100 meters DC Input Power DC Supply Power 75 ℃ -40 ℃ Data Power Data Power Data Industrial PoE PoE Switch IPOE-171 Series Industrial 802.3bt PoE PTZ PoE Extender IP Camera 1000BASE-T UTP PoE 1000BASE-T UTP with PoE DC Power Line (DC) 5

IPOE-171-60W Specifications Product IPOE-171-60W Hardware Specifications Input Port 1 x RJ45 STPData In Interface Output Port 1 x RJ45 STPPoE (Data + Power) Out Input power terminal block 1 Twisted-pair cable up to 100 meters (328ft) Network Cable 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 System: Power 1 (Green), Power 2 (Green), Fault (Red) LED Indicator PoE Port: PoE-in-Use x 1 (Orange) PoE Usage: PoE Usage x 3 (Orange) Data Rate 10/100/1000Mbps Dimensions (W x D x H) 135 x 87.8 x 32 mm Weight 430g Power Requirements DC 48~56V, 2A max. Unit Output Voltage DC 45~53V Power Consumption 75 watts max. No. of devices that can be powered 1 Installation DIN-rail kit or wall-mount ear Alarm Provides one relay output for power failureAlarm Relay current carry ability: 1A @ DC 24V Enclosure IP30 slim-type metal case Power over Ethernet PoE Standard IEEE 802.3at/bt Ultra PoE PSE PoE Power Output Budget DC 50~54V / 60-watt PoE via 4-pairDC 48~49V / 30-watt PoE via 2-pair PoE Power Output Max. 60W@1m cableMax. 51W@100m cable PoE Power Supply Type End-span + Mid-span Power Pin Assignment Pair 1 End-span: 1/2 (-), 3/6 (+)Pair 2 Mid-span: 4/5 (+), 7/8 (-) PoE mode Standard: To provide power to the PD device that follows the IEEE 802.3af/at/bt standard.Legacy: To provide power to the PD device that does not fully follow the IEEE 802.3af/at/bt standard. Standards Conformance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet Standards Compliance IEEE 802.3ab 1000BASE-T Gigabit EthernetIEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Regulatory Compliance FCC Part 15 Class A, CE Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Operating Humidity 5 ~ 90%, relative humidity, non-condensing Storage Humidity 5 ~ 90%, relative humidity, non-condensing Standard Accessories IPOE-171-60W Package Contents User's manualWall-mount kit Dust cap Ordering Information IPOE-171-60W Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts, -40~75 degrees C, 48~56V DC) 6

IPOE-171-60W Related Products POE-171A-60 Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts) POE-171A-95 Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95 Watts) IPOE-171-95W Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95 Watts, -40~75 degrees C, 24~48V DC) IPOE-162 Industrial IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-span) IPOE-171S Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter IPOE-E172 Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender IPOE-E174 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender ICA-E6265 2 Mega-pixel IR PoE Plus Speed Dome IP Camera with Extended Support PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IPOE-171-60W Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 7