メディアコンバーター PLANET IGT-1205AT

IGT-1205AT Industrial 10/100/1000T to 2-port 100/1000X SFP Media Converter Physical Port • 1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function • 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured Fiber Port Redundancy • Link status auto-detect and redundant on dual ports with the same connector type Flexible, Reliable and Industrial-grade Network Distance Extension Solution • Only Primary-Port is active at a time, the Backup-Port is PLANET IGT-1205AT is an Industrial Gigabit Media Converter providing non-blocking blocked wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh • When Primary-Port link failure occurs, the traffic will swap industrial environment. It is equipped with one 10/100/1000Base-T RJ-45 copper and to Backup-Port automatically. two 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case • Once the Primary-Port status is back to link-up, the traffic with redundant power system. The IGT-1205AT is well suited for applications in deploying will swap from Backup-Port to Primary-Port surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from – 40 to 75 degrees C. Layer 2 Features • Supports auto negotiation and 10/100Mbps half / full Fiber-Optic Link Capability Enables Extension of Network Deployment duplex and 1000Mbps full duplex mode The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM • High performance Store and Forward architecture, runt/ through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optic CRC filtering eliminates erroneous packets to optimize the uplink capability guarantees the throughput to all nodes hooked into the network and network bandwidth the Gigabit Ethernet distance can be extended from 550 meters (Multi-mode fiber cable) up to 10/20/30/40/50/70/120 kilometers (Single-mode fiber cable), and also the Fast • Prevents packet loss with back pressure (half-duplex) and Ethernet distance can be extended from 2km (Multi-mode fiber cable) up to 20/40/60 IEEE 802.3x pause frame flow control (full-duplex) kilometers (Single-mode fiber cable). They are well suited for applications within the • 9K Jumbo Frame Size support factory data centers and distributions. • Integrated address look-up engine, support 1K absolute MAC addresses Extending Ethernet Distance • Automatic address learning and address aging Industrial Case / Installation Outdoor Outdoor IP Camera IP Camera • Slim IP30 metal case protection • DIN rail and wall mount design Ethernet up to Ethernet up to 100 meters 100 meters • Redundant Power Design – 12 to 48V DC, redundant power with polarity reverse Network Video Recorder protect function – AC 24V power adapter acceptable Gigabit Fiber Switch • Supports EFT protection 6000 VDC for power line IGT-1205AT IGT-1205AT • Supports 6000 VDC Ethernet ESD protection Fiber Optic Cable Fiber Optic Cable up to 120km up to 120km • -40 to 75 degrees C operating temperature Data Sheet 240km 1 1

IGT-1205AT Adjustable 3-Port Switch Mode or 2 Fiber Redundant Mode Via the built-in DIP switch, the two SFP fiber interfaces of the IGT-1205AT can be configured as Ethernet switch mode or Fiber Redundant mode. With the Ethernet switch mode, it can operate in Store-and-Forward mechanism with high performance; with the 2-port Fiber redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recovering function. If the destination port of a packet is link- down, it will forward the packet to the other port of the backup pair. Site to Site Fiber Link Redundancy — ISP, Bank and Enterprise Primary Link IGT-1205AT 1000Base-X Fiber(Forwarding) IGT-1205AT Redundant Industrial 1000 Redundant Industrial Converter 20Km Converter Redundant Link 1000Base-X Fiber (Disabled) 10/100/1000Base-T UTP 10/100/1000Base-T UTP Gigabit Gigabit Ethernet Switch Ethernet Switch Location A Location B 1000Base-T UTP 1000 1000Base-SX/LX Fiber-optic Environmentally Hardened Design The IGT-1205AT is equipped with the slim-type IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case protection, the IGT-1205AT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGT-1205AT can be placed in almost any difficult environment. The IGT-1205AT also allows either DIN rail or wall mounting for efficient use of cabinet space. Convenient and Reliable Power System To enhance the operation reliability and flexibility, the IGT-1205AT is equipped with two DC power input connectors for redundant power supply installation. It also possesses an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs. Applications Hardened Environment Application PLANET IGT-1205AT Industrial Gigabit Media Converter offers full port Gigabit speed. It provides very high reliability and security features to make sure the continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures can be experienced. Moreover, the IGT-1205AT is also compatible with 100Mbps and 1000Mbps SFP transceivers to provide a strong, stable and long- distance connection and flexible industrial networking deployment. Fiber Switch Serial over IGT-1205AT Ethernet Device 100 20km 50km 1000 IGT-1205AT I/O Control Center 1000 120km PLC I/O Outdoor IP Camera IGT-1205AT Robot ROBOT I/O ROBOT Robot Subway 2 Maintenance Shop Outdoor IP Camera 100BASE-TX UTP 100 100BASE-FX Fiber-optic 1000 1000BASE-SX/LX Fiber-optic Subway 1 I/O DI/DO 2

IGT-1205AT Redundancy Application The IGT-1205AT industrial Gigabit Media Converter provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair. Link Path Redundant to Critical Network Service Server 1000 IGT-1205AT (ATM/Primary Link IP Camera/ 1000Base-X Fiber Redundant Industrial Security Machine) Gigabit (Forwarding) Converter Ethernet Switch Data Server Redundant Link Gigabit 1000Base-X Fiber Ethernet Switch (Disabled) 1000Base-T UTP 1000 1000Base-SX/LX Fiber-optic Product Specifications Model IGT-1205AT Hardware Specifications 1 x 10/100/1000Base-T RJ-45 TP Copper Ports Auto-MDI/MDI-X, Auto-Negotiation 2 1000Base-SX/LX/BX SFP interfaces (Port-1 and Port-2) SFP / mini-GBIC Slots Compatible with 100Base-FX SFP ƒ DIP-1: SFP Port 1 1000Base-X (default) / 100Base-FX DIP Switch ƒ DIP-2: SFP Port 2 1000Base-X (default)/ 100Base-FX ƒ DIP-3: Switch mode / Fiber Redundant mode Removable 6-pin terminal block Connector Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Provides one relay output for power failure Alarm Alarm Relay current carry ability: 1A @ DC 24V 3 x LED for System and Power: ƒ Green: DC Power 1 ƒ Green: DC Power 2 ƒ Green: Power Fault LED 2 x LED for Per Copper Port: ƒ Green:1000 LNK/ACT ƒ Orange:100 LNK/ACT 1 x LED for Per mini-GBIC interface (Port-1 and Port-2) ƒ Green: LNK/ACT ESD Protection 6KV DC EFT Protection 6KV DC Enclosure IP30 type metal case Installation DIN rail kit and wall mount ear Dimensions (W x D x H) 135 x 87 x 32mm Weight 505g DC 12~48V or AC 24V Power Requirements Redundant power with polarity reverses protection function Power Consumption / Dissipation 4.8 watts/16BTU 3

IGT-1205AT Twisted-Pair 10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters 100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters 1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters Fiber-Optic Cable 1000Base-SX: Cable 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m 1000Base-LX: 9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers (vary on SFP module) 100Base-FX: ƒ 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 2 kilometers ƒ 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (vary on SFP module) Switch Specifications Switch Processing Scheme Store-and-Forward Address Table 1K entries Back pressure for half duplex Flow Control IEEE 802.3x pause frame for full duplex Switch fabric 6Gbps Throughput (packet per second) 4.46Mpps@64bytes Maximum Transmit Unit 9216 bytes SX/LX: 2000Mbps (full-duplex) Speed FX: 200Mbps (full-duplex) TP: 10/20Mbps, 100/200Mbps, 2000Mbps Switch Specifications IEEE 802.3 Ethernet / 10Base-T IEEE 802.3u Fast Ethernet / 100Base-TX Standards Compliance IEEE 802.3ab Gigabit Ethernet / 1000Base-T IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX IEEE 802.3x Full-Duplex Flow Control Regulation Compliance FCC Part 15 Class A, CE IEC60068-2-32(Free fall) Stability Testing IEC60068-2-27(Shock) IEC60068-2-6(Vibration) Environment Operating: -40~75 degrees C Temperature Storage: -40~75 degrees C Operating: 5~95% (non-condensing) Humidity Storage: 5~95% (non-condensing) Ordering Information IGT-1205AT Industrial 10/100/1000T to 2-port 100/1000X SFP Media Converter Related Products MFB-Series Transceiver 100Base-FX SFP Transceiver MGB-Series Transceiver 1000Base-SX/LX SFP Transceiver PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGT-1205AT 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2014 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 4