産業用PoEスイッチ PLANET IGS-5225-8P4S

IGS-5225-8P4S L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 4-Port 100/1000X SFP Managed Ethernet Switch Physical Port • 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector • 4 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection • One RJ45 console interface for basic management and setup Power over Ethernet Advanced Manageable PoE Solution for Hardened Environment • Complies with IEEE 802.3at Power over Ethernet Plus/end- PLANET IGS-5225-8P4S L2+ Industrial Managed PoE+ Switch, featuring 8 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, span PSE and 4 100/1000X fiber ports in an IP30 rugged metal case, can be installed in any • Up to 8 IEEE 802.3af/802.3at devices powered difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management • Supports PoE power up to 36 watts for each PoE port interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, • Auto detects powered device (PD) and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self- • Circuit protection prevents power interference between recovery capability and PLANET intelligent PoE functions for controlling the PoE ports outdoor IP surveillance and wireless network applications. It is able to operate • Remote power feeding up to 100m reliably, stably and quietly in the temperature range from -40 to 75 degrees C. • PoE management features – Total PoE power budget control – Per port PoE function enable/disable – PoE admin-mode control – PoE port power feeding priority – Per PoE port power limit – PD classification detection • Intelligent PoE features – Temperature threshold control – PoE usage threshold control Cybersecurity Network Solution to Minimize Security Risks – PD alive check The new generation of IGS-5225-8P4S has the cybersecurity feature to protect – PoE schedule the switch management and enhance the security for mission-critical network Industrial Protocol without extra deployment cost and effort. The new IGS-5225-8P4S expands its memory and upgrades the kernel of SSH and SSL protocols to provide strong • Modbus TCP for real-time monitoring in the SCADA system protection against advanced threats. It includes a range of cybersecurity features • IEEE 1588v2 PTP (Precision Time Protocol) such as DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x port-based and MAC-based network access control, RADIUS and TACACS+ user Industrial Case and Installation accounts management, SNMPv3 authentication, and so on to complement it as • IP30 aluminum case an all-security solution. The network administrator can now construct highly-secure • DIN rail and wall-mount design corporate networks with considerably less time and effort than before. • 48~56V DC, redundant power with polarity reverse protect Redundant Ring, Fast Recovery for Critical Network Applications function The IGS-5225-8P4S supports redundant ring technology and features strong, • Supports 5000V DC Ethernet ESD protection rapid self-recovery capability to prevent interruptions and external intrusions. 1

IGS-5225-8P4S It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection • -40 to 75 degrees C operating temperature Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance Digital Input and Digital Output system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 20ms. • 2 Digital Input (DI) Office • 2 Digital Output (DO) Factory • Integrate sensors into auto alarm system 1000 • Transfer alarm to IP network via email and SNMP trap Industrial MAN Switch Industrial MAN Switch Layer 2 Features 1000 E.R.P.S. Ring for Metropolitan Area Network Application • Prevents packet loss with back pressure (half-duplex) Recovery Time < 50ms and IEEE 802.3x pause frame flow control (full-duplex) 1000 • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to PoE PoE optimize the network bandwidth 1000 8-Port MAN Switch • Storm Control support 1000 Industrial PoE Switch Industrial Highway PoE Switch Control Center – Broadcast/Multicast/Unicast • Supports VLAN – IEEE 802.1Q tagged VLAN High Power PoE for Security and Public Service Applications – Up to 255 VLANs groups, out of 4094 VLAN IDs To fulfill the demand of High Power PoE for network applications with Gigabit – Provider Bridging (VLAN Q-in-Q) support (IEEE speed transmission under wide temperature, the IGS-5225-8P4S provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) 802.1ad) that combines up to 36-watt power output and data per port over one Cat5E/6 – Private VLAN Edge (PVE) Ethernet cable. As the whole system comes with a total 240-watt PoE budget, the – Protocol-based VLAN IGS-5225-8P4S is designed specifically to satisfy the growing demand of higher – MAC-based VLAN power consuming network PDs (powered devices) such as multi-channel (802.11a/ – Voice VLAN b/g/n) wireless LAN access points, PTZ (pan, tilt, zoom)/speed dome network – GVRP (GARP VLAN Registration Protocol) cameras and other PoE network devices, doubling that of the current conventional • Supports Spanning Tree Protocol 802.3af PoE. – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) Convenient and Smart ONVIF Devices with Detection Feature – IEEE 802.1s Multiple Spanning Tree Protocol PLANET has newly developed an awesome feature -- ONVIF Support -- which (MSTP), spanning tree by VLAN is specifically designed for co-operating with video IP surveillances. From the – BPDU Guard IGS-5225-8P4S GUI, clients just need one click to search and show all of the • Supports Link Aggregation ONVIF devices via network application. In addition, clients can upload floor images to the switch series, making the deployments of surveillance and other – 802.3ad Link Aggregation Control Protocol (LACP) devices easy for planning and inspection purposes. Moreover, clients can get real- – Cisco ether-channel (static trunk) time surveillance’s information and online/offline status; the PoE reboot can be – Maximum 6 trunk groups with 4 ports per trunk controlled from the GUI. group – Up to 8Gbps bandwidth (duplex mode) • Provides port mirror (1-to-1) • Port mirroring to monitor the incoming or outgoing traffic on a particular port • Loop protection to avoid broadcast loops • Supports ERPS (Ethernet Ring Protection Switching) • Compatible with Cisco Uni-directional link 2

IGS-5225-8P4S detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices • Link Layer Discovery Protocol (LLDP) Layer 3 IP Routing Features • Supports maximum 32 static routes and route summarization Quality of Service Intelligent Alive Check for Powered Device • Ingress Shaper and Egress Rate Limit per port The IGS-5225-8P4S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the bandwidth control IGS-5225-8P4S will recycle the PoE port power and bring the PD back to work. It • 8 priority queues on all switch ports also greatly enhances the reliability in that the PoE port will reset the PD power, • Traffic classification thus reducing administrator’s management burden. – IEEE 802.1p CoS Step 1 Step 2 – IP TOS/DSCP/IP precedence – IP TCP/UDP port number PD Status PT PoE Camera No Response...... Good!! – Typical network application Ping Request • Strict priority and Weighted Round Robin (WRR) CoS Ping Request Ping Echo Check alive status for 3 times policies Step 3 Step 4 • Supports QoS and In/Out bandwidth control on each Alarm Notification port PoE PD Alive!! PoE • Traffic-policing on the switch port ON OFF ON ON • DSCP remarking Restart PoE device if without response Multicast • Supports IPv4 IGMP snooping v1, v2 and v3 PoE Schedule for Energy Saving • Supports IPv6 MLD snooping v1 and v2 Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-8P4S can effectively control the power • Querier mode support supply besides its capability of giving high watts power. The built-in “PoE schedule” • IGMP snooping port filtering function helps you to enable or disable PoE power feeding for each PoE port • MLD snooping port filtering during specified time intervals and it is a powerful function to help SMBs or • MVR (Multicast VLAN Registration) enterprises save power and money. Security 8 AM 5 PM 5 PM 8 AM • Authentication – IEEE 802.1x Port-based / MAC-based network access authentication – Built-in RADIUS client to co-operate with the PoE PoE PoE PoE PoE PoE PoE PoE RADIUS servers – TACACS+ login users access authentication – RADIUS / TACACS+ users access authentication Power Power Power Power Power Power Power Power On On On On Off Off Off On • Access Control List 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts – IP-based Access Control List (ACL) Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours Total Saved = 10800watts/month – MAC-based Access Control List PoE 1000BASE-TX UTP with PoE 3

IGS-5225-8P4S Scheduled Power Recycling • Source MAC / IP address binding The IGS-5225-8P4S allows each of the connected PoE IP cameras or PoE wireless • DHCP Snooping to filter un-trusted DHCP messages access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding Automatically Reboot Every Friday 23:00 • IP Source Guard prevents IP spoofing attacksS M T W T F S • IP address access management to prevent CPU/Buffer Load 85% unauthorized intruder PoE CPU/Buffer Management Load 10% • IPv4 and IPv6 dual stack management ON OFF ON PoE PT Camera • Switch Management Interfaces – Console/Telnet Command Line Interface SMTP/SNMP Trap Event Alert – Web switch management The IGS-5225-8P4S provides event alert function to help to diagnose the abnormal – SNMP v1 and v2c switch management device owing to whether or not there is a break of the network connection, or the – SSH/SSL and SNMP v3 secure access rebooting response. • SNMP Management SMTP/SNMP Trap Event Alert – Four RMON groups (history, statistics, alarms, and IGS-5225-8P4S E-mail Alert events) – SNMP trap for interface Link Up and Link Down notification Malfunction • IPv6 IP address/NTP/DNS management PoE PoE • Built-in Trivial File Transfer Protocol (TFTP) client • BOOTP and DHCP for IP address assignment • System Maintenance – Firmware upload/download via HTTP/TFTP – Reset button for system reboot or reset to factory PoE IP Camera PoE IP Camera default – Dual Images Effective Alarm Alert for Better Protection • DHCP Relay and DHCP Option 82 The IGS-5225 series supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users • DHCP Server would not have to waste time finding where the problem is. It will help to save time • User Privilege levels control and human resource. • Network Time Protocol (NTP) Fault Alarm Feature • SFP-DDM (Digital Diagnostic Monitor) DC/DC Power Fiber/RJ45 Connection • Network Diagnositc Failure Link Down – ICMPv6/ICMPv4 Remote Ping – Cable diagnostic technology provides the mechanism to detect and report potential cabling or issues • PLANET Smart Discovery Utility for deployment management SNMP TRAP Mail System Log 4

IGS-5225-8P4S Digital Input and Digital Output for External Alarm The IGS-5225 series supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225 series port shows link down, link up or power failure. Digital Input Security OK!! Alarm Warning Alarm Messaging Uplink I/O I/O I/O I/O Enclosure Enclosure SNMP Door Detector Door Detector TRAP (Door Closed) (Door Open) Mail System Log Digital Output I/O I/O I/O I/O DC Power Failure Fiber Cable RJ45 Cable Link Down Link Down Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225 series not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225 series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225 series provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225 series allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 6 trunk groups with 4 ports per trunk group, and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Efficient Management For efficient management, the IGS-5225 Managed Ethernet Switch series is equipped with console, Web and SNMP management interfaces. With the built- in Web-based management interface, the IGS-5225 series offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225 series can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard- based management software by supporting SNMPv3 connection which encrypts the packet content at each session. 5

IGS-5225-8P4S 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH Powerful Security The IGS-5225 series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP Provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225 series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 1588 Time Protocol for Industrial Computing Networks The IGS-5225 series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Base Station 1000 1000 Slave Grand Master Base Station IGS-5225-8P4S Transparent Clock 1000 1000BASE-SX/LX Fiber-optic Base Station Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-8P4S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. 6

IGS-5225-8P4S Intelligent SFP Diagnosis Mechanism The IGS-5225 series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Digital Diagnostic Monitor (DDM) Voltage 6 Ammeter 4 8 30 2 10 20 40 0 12 10 50 V 0 60 mA Temperature 50 25 75 0 100 °C 0 −20 20 0 −20 20 −40 40 −40 40 −60 60 −60 60 dBm dBm Power Transceiver Power Receiver Applications Industrial Area Department/Workgroup PoE Switch Providing up to 8 PoE+, in-line power interfaces, the IGS-5225-8P4S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-8P4S makes the installation of IP cameras or wireless AP easier and more efficient. Extending Ethernet Distance Outdoor Outdoor IP Camera IP Camera Ethernet up to PoE PoE Ethernet up to 100 meters 100 meters Network Video Recorder 1000 1000 Fiber Optic Cable Fiber Optic Cable Gigabit Fiber Switch up to 120km up to 120km IGS-5225-8P4S IGS-5225-8P4S 240km 1000 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP PoE 1000BASE-T UTP with PoE 7

IGS-5225-8P4S Specifications Product IGS-5225-8P4S Hardware Specifications Hardware Version 2 Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 4 1000BASE-SX/LX/BX SFP interfaces (Port-9 to Port-12) SFP/mini-GBIC Slots Compatible with 100BASE-FX SFP PoE Injector Port 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8 Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 24Gbps/non-blocking Throughput (packet per second) 17.85Mpps@ 64 bytes packet Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4Mbits IEEE 802.3x pause frame for full-duplex Flow Control Back pressure for half-duplex Jumbo Frame 9Kbytes < 5 sec: System reboot Reset Button > 5 sec: Factory default ESD Protection 5KV DC Enclosure IP30 aluminum case Installation DIN rail kit and wall-mount kit Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Connector Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC Level 0: -24V~2.1V (±0.1V) 2 Digital Input (DI) Level 1: 2.1V~24V (±0.1V) DI/DO Input load to 24V DC, 10mA max. 2 Digital Output (DO) Open collector to 24V DC, 100mA max. System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) Ring Owner (Green) LED Indicator DIDO (Red) Per 10/100/1000T RJ45 PoE+ Ports: PoE-in-Use (Orange) LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Dimensions (W x D x H) 72 x 107 x 152 mm Weight 1065g Power Requirements Dual 48~56V DC (>51V DC for PoE+ output recommended) Max. 10.1 watts/34.44BTU (Power on without any connection) Power Consumption Max. 255.9 watts/872.62BTU (Full loading with PoE function) Power Over Ethernet PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget Dual power input: 240W maximum (depending on power input) Max. number of Class 2 PDs 8 Max. number of Class 3 PDs 8 Max. number of Class 4 PDs 8 Layer 2 Function Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c 8

IGS-5225-8P4S Secure Management Interfaces SSH, SSL, SNMP v3 Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Port Configuration Flow control disable/enable Power saving mode control Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX/RX/both Port Mirroring Many-to-1 monitor 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs IEEE 802.3ad LACP/static trunk Link Aggregation Supports 6 trunk groups with 4 ports per trunk group Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IPv4 IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Snooping IPv4 IGMP querier mode support IPv6 MLD (v1/v2) snooping, up to 255 multicast groups MLD Snooping IPv6 MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 123 entries Per port bandwidth control Bandwidth Control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps RFC 1213 MIB-II RFC 2737 Entity MIB IF-MIB RFC 2618 RADIUS Client MIB RFC 1493 Bridge MIB RFC 2933 IGMP-STD-MIB SNMP MIBs RFC 1643 Ethernet MIB RFC 3411 SNMP-Frameworks-MIB RFC 2863 Interface MIB IEEE 802.1X PAE RFC 2665 Ether-Like MIB LLDP RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) MAU-MIB Layer 3 Function IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries IPv4 software static routing Routing Protocols IPv6 software static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3af Power over Ethernet IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3at Power over Ethernet Plus IEEE 802.3z Gigabit SX/LX IEEE 1588 PTPv2 IEEE 802.3ab Gigabit 1000T RFC 768 UDP IEEE 802.3x flow control and back pressure RFC 793 TFTP IEEE 802.3ad port trunk with LACP RFC 791 IP IEEE 802.1D Spanning Tree Protocol RFC 792 ICMP Standards Compliance IEEE 802.1w Rapid Spanning Tree Protocol RFC 2068 HTTP IEEE 802.1s Multiple Spanning Tree Protocol RFC 1112 IGMP v1 IEEE 802.1p Class of Service RFC 2236 IGMP v2 IEEE 802.1Q VLAN tagging RFC 3376 IGMP version 3 IEEE 802.1ad Q-in-Q VLAN stacking RFC 2710 MLD version 1 IEEE 802.1X Port Authentication Network Control FRC 3810 MLD version 2 IEEE 802.1ab LLDP ITU G.8032 ERPS Ring Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) 9

IGS-5225-8P4S Diagram Top View DI0 DI1 DO0 DO1 GND GND 1A@24V Mounting Kit Input DC 48V~56V DC1 Fault DC2 Side View Front View Side View Rear View Console 115200,N,8,1 P1 P2 FAULT Ring R.O. DIDO 1000 LNK ACT 11 100 LNK ACT 11 12 12 PoE Power Usage 240W 9 180W 9 10 10 120W 60W 7 8 5 6 3 4 DIN-Rail Kit LNK ACT 1 2 PoE In-Use 802.3at PoE RESET IGS-5225-8P4S Bottom View Mounting Kit Dimensions ( unit = mm ) Ordering Information IGS-5225-8P4S L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 4-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) Related Products L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Ethernet IGS-5225-8P2T2S Switch (-40~75 degrees C) IGS-5225-8T2S2X L3 Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP + 2-Port 10G SFP+ Managed Ethernet Switch (-40~75 degrees C) L3 Industrial 8-Port 10/100/1000T 802.3at PoE + 4-Port 100/1000X SFP + 2-Port 10G SFP+ Managed Ethernet Switch IGS-5225-8P2S2X (-40~75 degrees C) L2+ Industrial 8-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch IGS-12040MT (-40~75 degrees C) IGS-10020HPT L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGS-5225-8P4S 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 10