産業用PoEスイッチPLANET IGS-604HPT-M12

IGS-604HPT-M12 Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) Physical Port • 6-port 10/100/1000BASE-T waterproof and dustproof M12 connectors with 4-port IEEE 802.3at/af Power over Ethernet Injector function Hardware Conformance • Complies with IEEE 802.3at Power over Ethernet Plus end- span PSE • Complies with IEEE 802.3af Power over Ethernet end-span PSE • Up to 4 ports of IEEE 802.3af/802.3at devices powered • Supports PoE Power up to 36 watts for each PoE port • Auto detects powered device (PD) Suitable for Industrial Environment • Circuit protection prevents power interference between ports PLANET IGS-604HPT-M12, an Industrial Layer 2+ Managed Ethernet Switch, • Remote power feeding up to 100 meters • PoE Management comes with an IP67-rated industrial case, 4-port 10/100/1000T 802.3at PoE, 2-port – Total PoE power budget control 10/100/1000T, and static Layer 3 routing, providing a high level of immunity against – Per port PoE function enable/disable electromagnetic interference and heavy electrical surges which are usually found on – PoE Port Power feeding priority plant floors or in curb-side traffic control cabinets. The IGS-604HPT-M12 can be easily – Per PoE port power limitation mounted on a DIN rail or wall taking up less space. Each of the four Gigabit PoE+ ports – PD classification detection provides 36 watts of power, which means a total power budget of up to 144 watts can – PD alive check be utilized simultaneously without considering the different types of PoE applications – PoE schedule – PD scheduled power recycling being employed. It also provides a quick, safe and cost-effective Power over Ethernet network solution to IP security surveillance for small businesses and enterprises. Hardware Conformance • IP67-rated aluminum case • Redundant power design IP67 Rugged Case – 48 to 56V DC, redundant power with polarity reverse protect function – Active-active redundant power failure protection 2 x Waterproof Gigabit M12 – Backup of catastrophic power failure on one supply – Fault tolerance and resilience • DIN-rail and wall-mount design • Supports 6000V DC Ethernet ESD protection 4 x Waterproof Gigabit PoE+ M12 • -40 to 75 degrees C operating temperature Layer 3 IP Routing Features 48~56V DC Waterproof Redundant Power Input • Supports maximum 32 static routes and route summarization Layer 2 Features • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) 1

IGS-604HPT-M12 Waterproof and Dustproof M12 Ethernet Connector The IGS-604HPT-M12 is equipped with a 6-port 10/100/1000BASE-T auto-negotiation • High performance of Store-and-Forward architecture, and runt/ waterproof and dustproof M12 connector with 4-port IEEE 802.3at PoE+ (Port 3 to Port 6); CRC filtering that eliminates erroneous packets to optimize each PoE port provides 36-watt PoE output. The M12 connector provides tight and strong the network bandwidth connection and guarantees stable Ethernet operation performance under high vibration • Storm control support and shock environment and ensures it comes with the industrial protection rating of IP67 – Broadcast/Multicast/Unicast capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold. • Supports VLAN – IEEE 802.1Q tagged VLAN – Up to 255 VLANs groups, out of 4095 VLAN IDs – Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE) – Protocol-based VLAN – MAC-based VLAN – IP subnet-based VLAN – Voice VLAN • Supports Spanning Tree Protocol – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) Environmentally Hardened Design – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), The IGS-604HPT-M12 is able to protect itself from dust and water ingress, and to operate spanning tree by VLAN under the temperature range from -40 to 75 degrees C. All these features ensure the – BPDU Guard highest level of reliability for mission-critical applications in any difficult environment. • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) – Maximum 3 trunk groups, with 2 ports for each trunk – Up to 4Gbps bandwidth (full duplex mode) • Provides port mirror (many-to-1) • Port mirroring monitors the incoming or outgoing traffic on a particular port • Loop protection to avoid broadcast loops • Supports E.R.P.S. (Ethernet Ring Protection Switching) • IEEE 1588 and synchronous Ethernet network timing Quality of Service Dual Power Input for High Availability Network System • Ingress shaper and egress rate limit per port bandwidth The IGS-604HPT-M12 features a strong dual power input system (Dual 48V~56V DC) control incorporated into customer’s automation network to enhance system reliability and • 8 priority queues on all switch ports uptime. For example, when DC Power 1 fails to work, the hardware failover function • Traffic classification will be activated automatically to keep powering the IGS-604HPT-M12 via DC Power 2 – IEEE 802.1p CoS alternatively without any loss of operation. – ToS/DSCP/IP precedence of IPv4/IPv6 packets – IP TCP/UDP port number Centralized Power Management for Gigabit Ethernet PoE Networking – Typical network application To fulfill the needs of higher power required PoE network applications with Gigabit speed • Strict priority and Weighted Round Robin (WRR) CoS policies transmission, the IGS-604HPT-M12 features high-performance Gigabit IEEE 802.3at • Traffic-policing policies on the switch port PoE+ (up to 36 watts) on all ports. It perfectly meets the power requirements of PoE VoIP • DSCP remarking phone, PoE Wireless AP and all kinds of PoE IP cameras such as IR, PTZ, speed dome Multicast cameras and even box type IP cameras with a built-in fan and heater for high power consumption. The IGS-604HPT-M12’s PoE capabilities also help to reduce deployment • Supports IGMP snooping v1, v2 and v3 • Supports MLD snooping v1 and v2 costs for network devices as a result of freeing from restrictions of power outlet locations. • Querier mode support Power and data switching are integrated into one unit, delivered over a single cable and • IGMP snooping port filtering managed centrally. It thus eliminates cost for additional AC wiring and reduces installation time. 2

IGS-604HPT-M12 Built-in Unique PoE Functions for Surveillance Management As a managed PoE Switch for surveillance network, the IGS-604HPT-M12 features the • MLD snooping port filtering following intelligent PoE management functions: • MVR (Multicast VLAN Registration) • PD Alive Check • Scheduled Power Recycling Security • SMTP/SNMP Trap Event Alert • Authentication • PoE Schedule – IEEE 802.1x port-based/MAC-based network access authentication Intelligent Powered Device Alive Check – IEEE 802.1x authentication with guest VLAN The IGS-604HPT-M12 can be configured to monitor a connected PD (Powered Device) – Built-in RADIUS client to cooperate with the RADIUS status in real time via ping action. Once the PD stops working and it is without response, servers the IGS-604HPT-M12 will resume the PoE port power and bring the PD back to work. It will – RADIUS/TACACS+ users access authentication greatly enhance the network reliability through the PoE port resetting the PD’s power source, • Access Control List thus reducing administrator management burden. – IP-based Access Control List (ACL) – MAC-based Access Control List (ACL) • Source MAC/IP address binding • DHCP Snooping to filter distrusted DHCP messages Step 1 Step 2 • Dynamic ARP Inspection discards ARP packets with invalid PT PoE Camera No Response......PD Status MAC address to IP address binding Good!! • IP Source Guard prevents IP spoofing attacks Ping Request • IP address access management to prevent unauthorized Ping Request Ping Echo intruderCheck alive status for 3 times Step 3 Step 4 Management Alarm Notification PoE PD Alive!! • IPv4 and IPv6 dual stack management PoE • Switch Management Interfaces ON OFF ON ON – Telnet command line interface Restart PoE device if without response – Web switch management – SNMP v1, v2c, and v3 switch management – SSH/SSL secure access Scheduled Power Recycling • IPv6 address/NTP management The IGS-604HPT-M12 allows each of the connected PDs to reboot at a specified time each • Built-in Trivial File Transfer Protocol (TFTP) client week. Therefore, it will reduce the chance of PD crash resulting from buffer overflow. • BOOTP and DHCP for IP address assignment • System Maintenance – Firmware upload/download via HTTP/TFTP Automatically Reboot – Reset button for system reboot or reset to factory default Every Friday 23:00 – Dual imagesS M T W T F S • DHCP relay and option 82 CPU/Buffer • User privilege levels control Load 85% • NTP (Network Time Protocol) • Link Layer Discovery Protocol (LLDP) and LLDP-MED PoE CPU/Buffer • Network diagnostic Load 10% – Cable diagnostic technology provides the mechanism to detect and report potential cabling issues ON OFF ON PoE PT Camera – ICMPv6/ICMPv4 remote ping • SMTP/Syslog remote alarm • Four RMON groups (history, statistics, alarms and events) SMTP/SNMP Trap Event Alert • SNMP trap for interface link up and link down notification Though most NVR or camera management software offers SMTP email alert function, the • System Log IGS-604HPT-M12 further provides event alert function to help to diagnose the abnormal • PLANET Smart Discovery Utility for deployment management device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by the PD Alive Check process. 3

IGS-604HPT-M12 SMTP/SNMP Trap Event Alert IGS-604HPT-M12 E-mail Alert Malfunction PoE PoE IP Camera IP Camera PoE Schedule for Energy Saving Besides being used for IP surveillance, the IGS-604HPT-M12 is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the IGS-604HPT-M12 can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save energy and budget. 8AM 5PM 5PM 8AM PoE PoE PoE PoE PoE PoE PoE PoE Power Power Power Power Power Power Power Power Off Off Off On On On On On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Save 24 watts/hr during off-business hours Total consumption of 36 watts/hr Total Saved = 10800 Watts/month PoE 1000Base-T UTP with PoE Redundant Ring, Fast Recovery for Critical Network Applications The IGS-604HPT-M12 supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain, simple Ring network, the recovery time of data link can be as fast as 20ms. Office Factory 1000 Industrial MAN Switch Industrial 10G Switch 1000 E.R.P.S. Ring for Metropolitan Area Network Application Recovery Time < 50ms PoE PoE PoE PoE 8-Port MAN Switch IGS-604HPT-M12 Control Center Highway 4

IGS-604HPT-M12 IPv6/IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the IGS-604HPT-M12 helps data centers, campuses, telecoms, and more to experience the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management The IGS-604HPT-M12 not only provides ultra high transmission performance, and excellent Layer 2 and Layer 4 technologies, but also layer 3 IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed and simple networking application. Robust Layer 2 Features The IGS-604HPT-M12 can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. Via the link aggregation of supporting ports, the IGS-604HPT-M12 allows the operation of a high-speed trunk to combine with multiple fiber ports and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Powerful Security The IGS-604HPT-M12 offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user, and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The IGS-604HPT-M12 also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Excellent Traffic Control The IGS-604HPT-M12 is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission. Efficient and Secure Management With built-in Web-based management interface, the IGS-604HPT-M12 L2+ Managed Switch offers an easy-to-use, platform-independent management and configuration facility which includes Web and SNMP management interfaces. The SNMP can be managed via any management software based on the standard of SNMP Protocol. For reducing product learning time, it offers Cisco-like command via Telnet and customer does not need to learn new console command. Moreover, it also offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. IGS-604HPT-M12 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH 5

IGS-604HPT-M12 Applications High Availability Networking Solution for Surveillance System The IGS-604HPT-M12 features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) into customer’s automation network to enhance system reliability and uptime. The IGS-604HPT-M12 is the ideal solution for surveillance system to build redundant connection and establish high bandwidth for public transmission system and railway transmission. Control Center IGS-604HPT-M12 IGS-604HPT-M12 IGS-604HPT-M12 Dual Band AP Dual Band AP PoE ERPS Ring PoE Recovery time <50 ms PoE PoE IP Camera IP Camera Railway Platform PoE 100BASE-TX UTP with PoE 1000BASE-T UTP PoE 1000BASE-T UTP with PoE Layer 3 VLAN Routing and PoE Application With the built-in, robust Layer 3 routing protocols, the IGS-604HPT-M12 ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 32 routing entries. The IGS-604HPT-M12, certainly an ideal solution for industries, offers greater security, control and bandwidth conservation, and high-speed uplink. Railway Transmission System Passenger Information System PoE IP Camera Entertainment System Next Stop PoE PoE Laptop N IP Surveillance Domain Wireless AP Domain N AP 192.168.10.x/24 Industrial IP67-rated 192.168.20.x/24 Content Server IGS-604HPT-M12PoE PoE Ethernet Switch NVR IGS-604HPT-M12 PoE PoE PoE PoE IGS-604HPT-M12 PoE IP Camera Dual Band Wireless AP Control Center IGS-604HPT-M12 PoE 100BASE-TX UTP with PoE IGS-604HPT-M12 PoE IP Camera 1000BASE-T UTP PoE IP Camera PoE 1000BASE-T UTP with PoE PoE PoE Industrial Backbone Switch PC VoIP 1000BASE-T UTPPC AP PoE 1000BASE-T UTP with PoE 6

IGS-604HPT-M12 Product Specifications Product IGS-604HPT-M12 Hardware Specifications Copper Ports 6 x M12, 8-pin A-Coded female connector, 10/100/1000BASE-T auto-MDI/MDI-X ports PoE Injector Port 4 ports with 802.3at/af PoE injector function (Port-3 to Port-6) Power Connector 1 x M12, 5-pin A-Coded male connector Switch Architecture Store-and-Forward Switch Fabric 12Gbps/non-blocking Throughput 8.9Mpps@64bytes Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4M bits Flow Control IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex Jumbo Frame 9K bytes Dimensions (W x D x H) 103 x 68.2 x 163 mm Weight 1069g Enclosure IP67 aluminum case Installation Wall-mount kit and DIN rail kit System: PWR1 (Green), PWR2 (Green), Fault (Red) Ring (Green), R.O. (Green) LED 10/100/1000T RJ45 Interfaces (Port 1 to Port 2): LNK/ACT (Green) 10/100/1000T RJ45 Interfaces (Port 3 to Port 6): LNK/ACT (Green) PoE-in-Use (Orange) Power Consumption Max. 165.3 watts/563.7 BTU Power Requirements Dual 48~56V DC (>53V DC for PoE+ output recommended) ESD Protection 6KV DC Power over Ethernet PoE Standard IEEE 802.3af/802.3at PoE/PSE PoE Power Supply Type End-span IEEE 802.3af Standard - Per port 48V~53V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 53V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget 144 watts max. (depending on power input) PD @ 7 watts 4 units PoE Ability PD @ 15.4 watts 4 units PD @ 30.8 watts 4 units Layer 2 Management Functions Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status Port Mirroring TX/RX/BothMany-to-1 monitor 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs Link Aggregation IEEE 802.3ad LACP/static trunk3 groups with 2 ports per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Traffic classification based strict priority and WRR 8-level priority for switching: QoS - Port number - 802.1p priority - 802.1Q VLAN tagging - DSCP/ToS field in IP packet 7

IGS-604HPT-M12 IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast groupsIGMP querier mode support MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groupsMLD querier mode support Access Control List IP-based ACL/MAC-based ACLUp to 256 entries Per port bandwidth control Bandwidth Control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps Layer 3 Functions IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries Routing Protocols IPv4 software static routingIPv6 software static routing Management Basic Management Interfaces Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH/SSL, SNMP v3 RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB SNMP MIBs RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP Power over Ethernet MIB Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) Railway Traffic *EN50155 IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP Standards Compliance IEEE 802.3af Power over EthernetIEEE 802.3at Power over Ethernet Plus IEEE 802.3az EEE (Energy Efficient Ethernet) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) Environment Operating Temperature: -40 ~ 75 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -40 ~ 80 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Standard Accessories 1 x 8-pin A-code M12-to-RJ45 UTP cable, 2m 1 x M12 5-pin A-coded female connector power cable, 1.2m 1 x Wall-mount kit Packet Contents 1 x DIN-rail kit 1 x Quick Installation Guide 6 x M12 Female Dust Cap 1 x M12 Power Waterproof Cap 8

IGS-604HPT-M12 Ordering Information Top View Mounting Kit Side View Front View Side View Rear View LNK/ACT 1 2 LNK/ACT 3 4 PoE LNK/ACT 5 6 PoE V2 V1 2 1 Pin Con V2 V1 3 7 1 DA+ 2 DA 4 6 3 DB+ FAULT 5 8 4 DC+ 5 DC PWR 2 R.O. 6 DB7 DD+ 8 DD PWR 1 Ring INPUT PoE IP67 Mgt. DC 48-56V IGS-604HPT-M12 Mounting Kit Bottom View Dimensions ( unit = mm ) Ordering Information IGS-604HPT-M12 Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) Related Products IGS-604HPT-RJ Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IGS-5226-4P2T Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch(-40~75 degrees C) ISW-800T-M12 Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch (-40~75 degrees C) ISW-804PT-M12 Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch with 4-Port PoE (-40~75 degrees C) Accessories CB-M12A8MRJ-200 8-Pin A-Coding M12 Male to RJ45 Ethernet Cable, 2 meters PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IGS-604HPT-M12 Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 9