PoEエクステンダー PLANET IPOE-E172

IPOE-E172 Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender Physical Port • 3 10/100/1000BASE-T Gigabit RJ45 interfaces – 1-port data + power input – 2-port data + power output Power over Ethernet • 1-port data + power input – Complies with IEEE 802.3bt/at Power over Ethernet end- span/mid-span PD – Supports PoE input power up to 95 watts Ultra PoE Solution for Breaking RJ45 100m Limitation • 2-port data + power output PLANET IPOE-E172 is an industrial IP63-rated 1-port Ultra PoE to 2-port 802.3bt/at Gigabit PoE Extender designed especially for point to multipoint PoE – Complies with IEEE 802.3af/802.3at/802.3bt Power over application. The IPOE-E172 can obtain a maximum of 95-watt PoE power from Ethernet/end-span + mid-span PSE ultra PoE input port and supplies a maximum of 60-watt PoE power budget – Up to 1 IEEE 802.3bt device powered for 2 PoE output ports, extending both the Gigabit Ethernet Data and IEEE – Up to 2 IEEE 802.3af/802.3at devices powered 802.3bt/802.3at Power over Ethernet over the UTP cable. The IPOE-E172 – Supports total PoE budget up to 60 watts for 2 PoE provides a simple solution for adding PoE ports without running more cabling and output ports achieves more flexible network applications without requiring an external power adapter. – Auto detects powered device (PD) • Extends the range of PoE to an additional 100 meters 60W 1 In 1 Out 50W (328ft.) Power • Forwards both Ethernet data and PoE power to remote UPoE Data 100m IEEE 802.3bt device 802.3bt PoE+ Injector/Switch 100m PoE PTZ IP Camera PoE Extender Layer 2 Features 25W+25W 60W 1 In 2 Out • Hardware-based 10/100Mbps, half/full duplex and 1000Mbps Power IEEE 802.3at full duplex mode, flow control, auto-negotiation and auto UPoE 100m Data 100m MDI/MDI-XIEEE 802.3at 802.3bt PoE+ Injector/Switch 100m • Features Store-and-Forward mode with wire-speed filtering PoE Extender PoE Dome IP Camera and forwarding rates • IEEE 802.3x flow control for full duplex operation and back 10W+10W 30W 1 In 2 Out pressure for half duplex operation Power IEEE 802.3af • Integrates address look-up engine, supporting 2K absolute PoE+ 100m MAC addresses Data 100m IEEE 802.3af 802.3at PoE+ Injector/Switch 100m • 9K jumbo frame support in 1000Mbps duplex mode PoE Extender PoE Dome IP Camera • Automatic address learning and address aging • Supports CSMA/CD protocol Data Sheet 1 1

IPOE-E172 Weather-proof RJ45 Ethernet Connector and Shielded Plug Industrial Case and Installation The IPOE-E172 is ideal for installing an extended range of outdoor PoE devices • IP63-rated aluminum case such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor • Wall-mount design PoE IP intercoms and much more. The IPOE-E172 is equipped with 3-port • Waterproof and dustproof 10/100/1000BASE-T auto-negotiation weather-proof RJ45 connectors and 3 • Supports 2000 VDC Ethernet ESD protection shielded RJ45 plugs for direct attach applications. These shielded RJ45 plugs can make the general UTP cable weather-proof. When connected to the weather-proof • -40 to 75 degrees C operating temperature RJ45 connector, it provides tight and strong connection, and ensures it comes with • No external power cable required for installation the industrial protection rating of IP63 capable of withstanding humidity, dirt, dust, • Plug and Play installation shock, vibrations, heat and cold. + + = Environmentally Hardened Design With industrial-level IP63-rated aluminum case, the IPOE-E172 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment. 2

IPOE-E172 Intelligent PoE Power Budget Alert The IPOE-E172 helps users to monitor the current status of PoE power usage easily via its advanced LED indication, which is called “Budget Alert” on the front panel of the IPOE-E172. When the PoE output power reaches 50 watts, this Budget Alert LED will light up. Plug and Play, and Easy Cabling Installation The IPOE-E172 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD). The IPOE-E172 injects power to the PD without affecting the data transmission performance. The IPOE-E172 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The IPOE-E172 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other two "PoE OUT" ports on the other side function as PoE (Data and Power) output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD. Applications One Power Sourcing for Multi Powered Devices Solution To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET IPOE-E172 is quite a useful device for users who have most of their network already set up, and wish to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow. Control Center PoE 802.3at/bt PSE/PoE+ Switch 100m IPOE-E172 PoE PoE PoE 100m 100m PoE PoE IP Camera IP Camera 3

IPOE-E172 The IPOE-E172 industrial 1-port ultra PoE to 2-port 802.3bt/at Gigabit PoE Extender, powered by a PSE over standard RJ45 cable, requires very little installation time and does not require any additional setup or programming. The ultra PoE injector port of the PSE supplies IEEE 802.3bt PoE power to the IPOE-E172 and then the IPOE-E172 converts the power for 2 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional power adapter for IP cameras and wireless access points is not necessary. PoE PoE 20m 20m PoE PoE PoE 802.3af/at PoE+ Out 802.3at/bt PoE+ In IPOE-E172 PoE 100m Specifications Model IPOE-E172 Hardware Specifications PoE In Port 1 x 10/100/1000BASE-T Ethernet with 802.3bt/at PoE “Data + Power” in, auto MDI/MDI-X, auto-negotiation RJ45 connector Network Connector PoE Out Port 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at/bt PoE “Data + Power” out, auto MDI/MDI-X, auto-negotiation RJ45 connector Switch Architecture Store-and-Forward switch architecture MAC Address Table 2K MAC address table with auto learning function Data Buffer 1Mbit Switch Fabric 6Gbps Switch Throughput 4.46Mpps @ 64 bytes IEEE 802.3x pause frame for full duplex Flow Control Back pressure for half duplex Jumbo Frame 9KB ESD Protection 2KV DC Enclosure IP63 aluminum case Installation Wall-mount kit System: PWR (green) Budget Alert (Red) PoE Input Port: LNK/ACT (green) LED Display 1000 (green) Per PoE Output Port: LNK/ACT (green) PoE-in-Use (orange) 4

IPOE-E172 Twisted-pair cable : 10BASE-T: 2-pair UTP Cat3, 4, 5 up to 100 meters Cable 100BASE-TX: 2-pair UTP Cat5, 5e up to 100 meters 1000BASE-T: 4-pair UTP Cat5e, 6 up to 100 meters Dimensions (W x D x H) 199.6 x 81 x 40 mm Weight 373g Power Consumption 60 watts/204BTU (Full loading with PoE function) Power over Ethernet PoE In Port IEEE 802.3bt/at Power over Ethernet end-span/mid-span PD class 4 PD Per PoE Out Port PoE Standard IEEE 802.3bt 4-pair Power over Ethernet end-span + mid-span PSE IEEE 802.3at Power over Ethernet Plus end-span + mid-span PSE IEEE 802.3af Power over Ethernet end-span + mid-span PSE PoE In Port 44~57V DC, max. 95 watts PoE Power Supply Type Per PoE Out Port 44~55V DC, max. 60 watts PoE In Port 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) Power Pin Assignment Per PoE Out Port 1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-) Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet Standards Compliance IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt 4-pair Power over Ethernet Environment Temperature: -40 ~ 75 degrees C Operating Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -40 ~ 85 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing) Accessory User’s Manual x 1 Standard Accessories Waterproof RJ45 Connector x 3 Wall-mounted Kit x 1 5

IPOE-E172 Three View Diagram PoE 1 Out PoE 2 Out LNK ACT PoE In-use Ordering Information IPOE-E172 Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IPOE-E172 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 6 PoE IN Budget Alert 1000 10/100/1000T LNK/ACT PWR IPOE-E172