イーサネットスイッチPLANET IGS-5225-4T2S

IGS-5225-4T2S L2+ Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Ethernet Switch Physical Port • 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection • One RJ45 console interface for basic management and setup Industrial Case and Installation • IP30 metal case • DIN-rail and wall-mount designs For Harsh and Space-limited Environments • 12~48V DC, redundant power with polarity reverse protect PLANET IGS-5225-4T2S, the smallest, fully-managed Gigabit fiber switch for function harsh environments, features 4 10/100/1000Mbps copper ports, 2 100/1000X SFP • 24V AC power input acceptable ports and redundant power system in an IP30 rugged but compact-sized case. The • Supports 5000V DC Ethernet ESD protection IGS-5225-4T2S can be installed in any difficult environment as it can operate stably under the temperature range from -40 to 75 degrees C. With such a slim enclosure, • -40 to 75 degrees C operating temperature it does not need a big space to install. The switch features user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions Layer 2 Features and Layer 3 static routing capability. It allows either DIN-rail or wall mounting for • Prevents packet loss with back pressure (half duplex) and efficient use of cabinet space. With 2 dual-speed SFP fiber slots, it can be flexibly IEEE 802.3x pause frame flow control (full duplex) applied to extend the connection distance. • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth • Storm Control support – Broadcast/Multicast/Unicast • Supports VLAN – IEEE 802.1Q tagged VLAN – Up to 255 VLANs groups, out of 4094 VLAN IDs – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE) – Protocol-based VLAN – MAC-based VLAN – Voice VLAN – GVRP (GARP VLAN Registration Protocol) • Supports Spanning Tree Protocol – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard 1

IGS-5225-4T2S Cybersecurity Network Solution to Minimize Security Risks • Supports Link Aggregation The new generation of IGS-5225-4T2S has the cybersecurity feature to protect the – 802.3ad Link Aggregation Control Protocol (LACP) switch management and enhance the security for mission-critical network without – Cisco ether-channel (static trunk) extra deployment cost and effort. The new IGS-5225-4T2S expands its memory and upgrades the kernel of SSH, TLS and SSL protocols to provide strong – Maximum 4 trunk groups with 4 ports per trunk group protection against advanced threats. It includes a range of cybersecurity features – Up to 8Gbps bandwidth (duplex mode) such as DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x • Provides port mirror (1-to-1) port-based and MAC-based network access control, RADIUS and TACACS+ user • Port mirroring to monitor the incoming or outgoing traffic on accounts management, SNMPv3 authentication, and so on to complement it as a particular port an all-security solution. The network administrator can now construct highly-secure • Loop protection to avoid broadcast loops corporate networks with considerably less time and effort than before. • Supports ERPS (Ethernet Ring Protection Switching) Layer 3 IP Routing Features • Supports maximum 32 static routes and route summarization Quality of Service • Ingress Shaper and Egress Rate Limit per port bandwidth control • 8 priority queues on all switch ports Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-4T2S supports redundant ring technology and features strong, • Traffic classification rapid self-recovery capability to prevent interruptions and external intrusions. It – IEEE 802.1p CoS incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) – IP TOS/DSCP/IP precedence technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input – IP TCP/UDP port number system into customer’s industrial automation network to enhance system reliability – Typical network application and uptime in harsh factory environments. In a certain simple Ring network, the • Strict priority and Weighted Round Robin (WRR) CoS recovery time of data link can be as fast as 10ms. policies Control Center • Supports QoS and In/Out bandwidth control on each port • Traffic-policing on the switch port • DSCP remarking IGS-5225-4T2S Multicast • Supports IPv4 IGMP snooping v1, v2 and v3 IGS-5225-4T2S • Supports IPv6 MLD snooping v1 and v2 IGS-5225-4T2S ERPS RingRecovery time <10ms IP Camera • Querier mode support • IPv4 IGMP snooping port filtering • IPv6 MLD snooping port filtering • MVR (Multicast VLAN Registration) Wireless AP Wireless AP Factory Warehouse 100BASE-TX UTP Security 1000BASE-T UTP • IEEE 802.1X Port-based/MAC-based network access authentication • Built-in RADIUS client to cooperate with the RADIUS servers 2

IGS-5225-4T2S • TACACS+ login users access authentication • RADIUS/TACACS+ users access authentication 4Gbps • IP-based Access Control List (ACL) Intranet Link Aggregation + Intranet Link Redundancy • MAC-based Access Control List Location A Location B • Source MAC/IP address binding • DHCP snooping to filter distrusted DHCP messages • Dynamic ARP Inspection discards ARP packets with invalid 2Gbps MAC address to IP address binding Intranet Link Redundancy Intranet • IP Source Guard prevents IP spoofing attacks • IP address access management to prevent unauthorized Location A Location B intruder Site to Site Fiber Link Redundancy Management SMTP/SNMP Trap Event Alert • Switch Management Interfaces The IGS-5225-4T2S provides event alert function to help to diagnose the abnormal – Console/Telnet Command Line Interface device owing to whether or not there is a break of the network connection, or the – Web switch management rebooting response. It supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users – SNMP v1 and v2c switch management would not have to waste time finding where the problem is. It will help to save time – SSH/SSL and SNMP v3 secure access and human resource. • Four RMON groups (history, statistics, alarms, and events) Fault Alarm Feature • IPv6 IP address/NTP/DNS management • Built-in Trivial File Transfer Protocol (TFTP) client DC/DC Power Fiber/RJ45 Connection • BOOTP and DHCP for IP address assignment Failure Link Down • Firmware upload/download via HTTP/TFTP • DHCP Relay • DHCP Option 82 • User Privilege levels control or • Network Time Protocol (NTP) • Link Layer Discovery Protocol (LLDP) • SFP-DDM (Digital Diagnostic Monitor) • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues • Reset button for system reboot or reset to factory default • PLANET Smart Discovery Utility for deployment management SNMP TRAP Mail System Log Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225 series not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. 3

IGS-5225-4T2S Robust Layer 2 Features The IGS-5225 series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225 series provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-4T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 10 trunk groups with 8 ports per trunk group, and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Efficient Management For efficient management, the IGS-5225 Managed Ethernet Switch series is equipped with console, Web and SNMP management interfaces. With the built- in Web-based management interface, the IGS-5225 series offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225 series can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard- based management software by supporting SNMPv3 connection which encrypts the packet content at each session. 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH Powerful Security The IGS-5225 series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. Flexibility and Extension Solution The additional two mini-GBIC slots built in the IGS-5225-4T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. 4

IGS-5225-4T2S Intelligent SFP Diagnosis Mechanism The IGS-5225 series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Digital Diagnostic Monitor (DDM) Voltage 6 Ammeter 4 8 30 2 10 20 40 0 12 10 50 V 0 60 mA Temperature 50 25 75 0 100 °C 0 −20 20 0 −20 20 −40 40 −40 40 −60 60 −60 60 dBm dBm Power Transceiver Power Receiver 1588 Time Protocol for Industrial Computing Networks The IGS-5225 series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Base Station 1000 1000 Slave Grand Master Base Station IGS-5225-4T2S Transparent Clock 1000 1000BASE-SX/LX Fiber-optic Base Station Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225 series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 5

IGS-5225-4T2S Applications Model that Withstands Harsh Operation The IGS-5225-4T2S is made to withstand any harsh operation in such environments as traffic control cabinets, factory floors, and indoor and outdoor locations where temperatures are extremely high or low. With a non-blocking design and compact size, the installation of the IGS-5225-4T2S is easy and helpful to build a Gigabit high-bandwidth switched network quickly. Extending Ethernet Distance IP Camera IP Camera Ethernet up to Ethernet up to 100 meters 100 meters Network Video Recorder 1000 1000 Fiber Optic Cable Fiber Optic Cable Gigabit Fiber Switch up to 120km up to 120km IGS-5225-4T2S IGS-5225-4T2S 240km 1000 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP Specifications Product IGS-5225-4T2S Hardware Specifications Copper Ports 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 2 1000BASE-SX/LX/BX SFP interfaces (Port-5 to Port-6) SFP/mini-GBIC Slots Compatible with 100BASE-FX SFP Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 12Gbps/non-blocking Throughput (packet per second) 8.9Mpps@ 64 bytes packet Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4Mbits IEEE 802.3x pause frame for full-duplex Flow Control Back pressure for half-duplex Jumbo Frame 9Kbytes < 5 sec: System reboot Reset Button > 5 sec: Factory default ESD Protection Air 8KV, Contact 6KV Enclosure IP30 metal case Installation DIN rail kit and wall-mount kit Removable 6-pin terminal block for power input Connector Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC 6

IGS-5225-4T2S System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) Ring Owner (Green) LED Indicator Per 10/100/1000T RJ45 Ports: 10/100Mbps LNK/ACT (Orange) 1000 LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Dimensions (W x D x H) 32 x 87x 135 mm Weight 456g Dual 12~48V DC Power Requirements 24V AC Max. 6.3 watts/21.6 BTU (Power on without any connection) Power Consumption Max. 8.5 watts/29.2 BTU (Full loading) Layer 2 Function Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Port Configuration Flow control disable/enable Power saving mode control Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX/RX/both Port Mirroring 1 to 1 monitor 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs GVRP IEEE 802.3ad LACP/static trunk Link Aggregation Supports 4 trunk groups with 4 ports per trunk group Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Snooping IGMP querier mode support MLD (v1/v2) snooping, up to 255 multicast groups MLD Snooping MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 123 entries Per port bandwidth control Bandwidth Control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps RFC 1213 MIB-II RFC 2737 Entity MIB IF-MIB RFC 2618 RADIUS Client MIB RFC 1493 Bridge MIB RFC 2933 IGMP-STD-MIB SNMP MIBs RFC 1643 Ethernet MIB RFC 3411 SNMP-Frameworks-MIB RFC 2863 Interface MIB IEEE 802.1X PAE RFC 2665 Ether-Like MIB LLDP RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) MAU-MIB 7

IGS-5225-4T2S Layer 3 Function IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries IPv4 software static routing Routing Protocols IPv6 software static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.1X Port Authentication Network Control IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.1ab LLDP IEEE 802.3z Gigabit SX/LX IEEE 1588 PTPv2 IEEE 802.3ab Gigabit 1000T RFC 768 UDP IEEE 802.3x flow control and back pressure RFC 793 TFTP IEEE 802.3ad port trunk with LACP RFC 791 IP Standards Compliance IEEE 802.1D Spanning Tree Protocol RFC 792 ICMP IEEE 802.1w Rapid Spanning Tree Protocol RFC 2068 HTTP IEEE 802.1s Multiple Spanning Tree Protocol RFC 1112 IGMP v1 IEEE 802.1p Class of Service RFC 2236 IGMP v2 IEEE 802.1Q VLAN tagging ITU G.8032 ERPS Ring IEEE 802.1ad Q-in-Q VLAN stacking Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Dimensions Top View Front View Side View Side View Rear View P1 P2 FAULT Ring R.O. RESET 115200,N,8,1 Mounting Kit 1000 LNK/ACT 6 5 100 LNK/ACT DIN-Rail Kit 4 3 2 1000 LNK/ACT 1 10/100 LNK/ACT Bottom View Mounting Kit Unit: mm 8 V1+ V1- 1A@24V V2+ V2- Input DC12~48V DC1 Fault DC2 AC 24V

IGS-5225-4T2S Ordering Information IGS-5225-4T2S L2+ Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) Related Products L2+ Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP + 2-Port 10G SFP+ Managed Ethernet Switch IGS-5225-8T2S2X (-40~75 degrees C) L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 4-Port 100/1000X SFP + 2-Port 10G SFP+ Managed Ethernet Switch IGS-5225-8P2S2X (-40~75 degrees C) L2+ Industrial 8-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch IGS-12040MT (-40~75 degrees C) L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Ethernet Switch IGS-10020HPT (-40~75 degrees C) L2+ Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Ethernet Switch IGS-10020MT (-40~75 degrees C) Available Modules for IGS-5225-4T2S 1000Mbps SFP transceiver modules MGB-GT SFP-Port 1000BASE-T Module MGB-SX SFP-Port 1000BASE-SX mini-GBIC module - 550m MGB-SX2 SFP-Port 1000BASE-SX mini-GBIC module - 2km MGB-LX SFP-Port 1000BASE-LX mini-GBIC module - 10km MGB-L40 SFP-Port 1000BASE-LX mini-GBIC module - 40km MGB-L80 SFP-Port 1000BASE-LX mini-GBIC module - 80km MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km MGB-TSX SFP-Port 1000BASE-SX mini-GBIC module - 550m (-40 ~ 75 degrees C) MGB-TLX SFP-Port 1000BASE-LX mini-GBIC module - 10km (-40 ~ 75 degrees C) MGB-TL40 SFP-Port 1000BASE-LX mini-GBIC module - 40km (-40 ~ 75 degrees C) MGB-TL80 SFP-Port 1000BASE-LX mini-GBIC module - 80km (-40 ~ 75 degrees C) 100Mbps SFP transceiver modules MFB-FX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km MFB-F20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km MFB-F40 SFP-Port 100BASE-FX Transceiver (1310nm) - 40km MFB-F60 SFP-Port 100BASE-FX Transceiver (1310nm) - 60km MFB-FA20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) - 20km MFB-FB20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) - 20km MFB-TFX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km (-40 ~ 75 degrees C) MFB-TF20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km (-40 ~ 75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGS-5225-4T2S 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2019 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 9