データセンターとOCPソリューションの電源カタログ

data center & ocp solutions belfuse.com/power-solutions

12 V SOLUTIONS Open Compute V2 Power Shelf & V2 Power Module The 6600 W stand-alone V2 Power Shelf is powered from three-phase AC line, hosting three 3300 W (N + 1) hot-swappable single-phase V2 Power Modules and three battery back-up units (BBU). AC PDU DC PDU 48 VDC ToR Switch 12 V Busbar Product Highlights AC/DC PSU • 3x 3300 W Power Supply Units (PSU), hot-pluggable • 3x 3600 W Lithium Ion Battery Back-up Units (BBU), hot-pluggable BBU • Three-Phase 200 - 277 VAC Input to Shelf • Redundant (2+1) Output 6600 W / 12.6 VDC 54 VDC with Active Current Sharing 2 Power • Redundant (2+1) Auxiliary Output 600 W / 54 VDC Shelves • High Efficiency > 95.9 % @ 277 VAC, 50% Load • High Power Quality (Power Factor and THD) • 52.5 V Input Battery Back-up / Charger for Lithium Ion Battery Pack • Digital Control for Improved Performance • RS485 Communication Interface for Control, Programming & Monitoring • Status LED with Fault Signaling AC PDU AC PDU is used to distribute AC voltage in OCP Racks. The AC lines are distributed to the V2 Power Shelves, which provide DC power to the Open Rack IT devices. INPUT SURGE PART NUMBER INPUT VOLTAGE STYLE PLUG TYPE CURRENT PROTECTION YSD.00152 (EU) 240 / 415 VAC (3P) 32 A 1 in / 2 out IEC 60309 Yes YSD.00162 (US) 277 / 480 VAC (3P) 20 A 2 in / 2 out L22-20P Yes YSD.00217 (US) 120 / 208 VAC (3P) 30 A 2 in / 2 out L21-30P No YSD.00218 (US) 277 / 480 VAC (3P) 30 A 1 in / 2 out L22-30P Yes YSD.00219 (US) 277 VAC (1P) 20 A 1 in / 1 out L7-20P No DC PDU DC PDU is used to distribute DC auxiliary power and monitoring signals in Open Racks. The monitoring signals are distributed from the V2 Power Shelves to the rack-monitoring device. SURGE PART NUMBER INPUT VOLTAGE INPUT CURRENT STYLE PLUG TYPE PROTECTION YSD.00134 54 VDC 32 A 0 in / 2 out N/A No

SPSPFE3-XX Power Shelf 18 kW AC-DC power shelf can be configured with up to six hot-swap capable platinum / titanium efficiency AC/DC-DC power supplies. • Holds up to six PFE3000-12-069RA / PFE3600-12-069RA / TET3000-12-069RA PSUs (up to 18 kW) • Dual Three-Phase AC Input • Redundant Configuration (3+3 or 5+1) • Triple (-05G) or Single (-04G, -06G) Busbar for +12 VDC Output • Built-in Controller (-05G, -06G) • Communication via Ethernet and I²C (PMBus®) • OCP Compatible PFE3000-12-069RA Power Supply The PFE3000-12-069RA is a 3000 Watt AC/DC power factor corrected (PFC) and DC-DC power supply that converts standard AC mains power or high voltage DC bus voltages into a main output of 12 VDC. • Input Voltage with PFC 90 - 300 VAC or 240 - 400 VDC • Output Voltage 12.3 V / 244 A • Standby Output (always present) 12 V / 5 A • Output Power 3000 W (Vin > 180 VAC, Vin > 192 VDC); 1400 W (Vin > 90 VAC) • Parallel Operation with Active Analog Current Sharing • Small Form Factor 69 x 42 x 555 mm • I²C Communication Interface with PMBus® Protocol PFE3600-12-069RA Power Supply The PFE3600-12-069RA is a 3600 Watt AC/DC power factor corrected (PFC) and DC-DC power supply that converts standard AC mains power or high voltage DC bus voltages into a main output of 12 VDC. • Input Voltage with PFC 90 - 300 VAC or 192 - 400 VDC • Output Voltage 12.3 V / 244 A • Standby Output (always present) 12 V / 5 A • Output Power 3600 W (Vin > 180 VAC, Vin > 192 VDC); 1400 W (Vin > 180 VAC) • Parallel Operation with Active Analog Current Sharing • Small Form Factor 69 x 42 x 555 mm • I²C Communication Interface with PMBus® Protocol TET3000-12-069RA Power Supply The TET3000-12-069RA is a 3000 Watt AC/DC power factor corrected (PFC) and DC-DC power supply that converts standard AC mains power or high voltage DC bus voltages into a main output of 12 VDC for powering intermediate bus architectures (IBA). • Input Voltage with PFC 90 - 300 VAC or 180 - 410 VDC • Output Voltage 12.3 V / 244 A • Standby Output (always present) 12 V / 3 A • Output Power 3000 W (Vin > 180 VAC) • Titanium Efficiency (>96% efficient at 50% load) • Parallel Operation with Active Analog Current Sharing • Small Form Factor 69 x 40.5 x 555 mm • I²C Communication Interface with PMBus® Protocol Disclaimer: PMBus is a registered trademark of SMIF, Inc.

DC-DC SOLUTIONS SPSPFF3-XX Power Shelf 1 OU / 15 kW N+1 DC-DC power shelf with controller houses six 3 kW DC-DC front end power supplies. DC PDU supplies the shelf in an OCP rack. • Holds up to six PFF3000-12-069RA PSUs (up to 18 kW) • 2x 250 A DC Inputs • Redundant Configuration (3+3 or 5+1) • Single 12 V Output Busbar • Built-in Controller • Communication via Ethernet and I²C (PMBus®) • OCP Compatible PFF3000-12-069RA Power Supply PFF3000-12-069RD is a 3 kW DC/DC front-end converter that provides a main output 12.5 VDC from 40 - 72 VDC bus voltages to power Intermediate Bus Architectures (IBA) in high-performance and high-reliability servers, routers, and network switches. • Input Voltage Range 40 - 72 VDC • Output Voltage 12.5 VDC / 244 A • Standby Output 12 VDC / 2 A • Output Power 3000 W • Parallel Operation with Active Analog Current Sharing • Small Form Factor 69 x 42 x 555 mm • I²C Communication Interface with PMBus® Protocol DC PDU - YSD.00273 This device has been designed to supply a 48 VDC input shelf. Two separate output circuits supply two separate inputs of the shelf. Four connectors, protected with 15 A circuit breakers provide input voltage to auxiliary equipment in the OCP rack. • Two Separate 48 VDC Inputs • Two High Current (250 A) 48 VDC Outputs • Four Auxiliary Outputs (15 A)

HV DC SOLUTIONS SPSPFE3-07 Power Shelf DC-DC power shelf can be configured with up to six hot-swap capable 3 kW platinum / titanium efficiency AC/DC-DC power supplies that convert High Voltage DC Bus power into a main output of 12 VDC for powering intermediate bus architectures (IBA) in high performance and reliability servers, routers and network switches. • Holds up to six PFE3000-12-069RA / PFE3600-12- • Single Busbar for 069RA / TET3000-12-069RA PSUs (up to 18 kW) +12.3 VDC Output output • Two 240 to 380 VDC inputs (nominal 380 VDC) • Built-in Controller (-05G, -06G) • 3 power modules powered from one DC inlet; • Communication via Ethernet and I²C (PMBus®) 2 DC inlets (Input1, Input2) • OCP Compatible • Redundant Configuration (3+3 or 5+1) HV DC PDU - YSU.00218 • Input voltage range from 240 to 380 VDC • Two separate VDC inputs • Two 33 A VDC outputs • Power distribution cables connected with Anderson Power SBS75X connector • Two PE power connections (dual-hole terminal lugs)

48 V SOLUTIONS SPSTET4-XX Power Shelf 24 kW AC-DC power shelf that houses six 4 kW titanium efficiency AC/DC-DC front end power supplies that convert single phase AC mains power into a main output of 54.5 VDC. • Holds up to six TET4000-48-069RA PSUs (up to 24 kW) • Dual Three-Phase AC Input • Redundant Configuration (3+3 or 5+1) • Single 48 V Output Busbar • Built-in Controller • Communication via Ethernet USB2 and CAN Bus • OCP Compatible TET4000-48-069RA Power Supply TET4000-48-069RA is a 4000 Watt AC-DC power factor corrected (PFC) and DC-DC power supply that converts standard AC mains power or high voltage DC bus voltages into a main output of 48 VDC (42 – 58 VDC) for supplying 48 VDC power distribution in high performance and reliability data center equipment, servers, routers and network switches. • Input Voltage with PFC 200 - 277 VAC or 192 - 400 VDC • Main Output 48 VDC with Programmable Voltage Set-Point 42 - 58 VDC • Standby Output 12 VDC / 60 W (Optional) • Output Power 4000 W • Parallel Operation with Active Analog Current Sharing • Small Form Factor 69 x 40.5 x 530 mm • CAN Communication Interface AC PDU - YSU.00210 AC Power Distribution Unit (PDU) has been designed to supply a 54.5 VDC power shelf. AC PDU converts 3-phase input to 3x single phase output. • Input voltage range from 200 to 415 VAC • Used for 54.5 VDC output power shelf • Can accommodate 3-phase Delta or Wye configuration • AC output is manually selected based from input configuration • PDU offers 12 pieces of AC appliance outlets

48 V-to-PoL Power Stamp 12V DC-DC Converter DDR4 DIMM48V BUS MAIN 1.215V VDDQ DDR4 DIMM DDR4 DIMM The main and satellite power stamp are isolated DC-DC 100ASATELLITE DDR4 DIMM converters housed in an industry standard form factor DDR4 DIMM niPoL V�defined by the power stamp alliance. They convert a 48 V 12V BUS DDR4 DIMM niPoL VPP DDR4 DIMM bus voltage into a low voltage suitable for typical server’s DDR4 DIMM motherboard subsystems. Power Stamp models available for: 48V BUS SATELLITE » Intel VR13 HC CPUs 1.8V VccIN » DDR4 memory MAIN 145A » IBM Power PC P9 SATELLITE VccIO VR13 HC CPU • Direct conversion from 48 V or 54 V bus VccSASATELLITE • Open Compute Project Servers for Data Centers 12V BUS VccANA • Storage and data processing equipment niPoL Vcc1P8 • Communication systems niPoL • Low voltage, high current ASICs and FPGAs CPU and DDR railsniPoL niPoL >10W power rails <10W power rails Product Highlights 12V DDR4 DIMM 48V BUS 1.215V MAIN VDDQ DDR4 DIMM• Over 94% efficiency 100A DDR4 DIMM at 1.8 Vout SATELLITE DDR4 DIMM DDR4 DIMM • Over 91% efficiency 12V BUS niPoL V� DDR4 DIMM at 1.0 Vout niPoL VPP DDR4 DIMM DDR4 DIMM • Up to 140 W continuous output power / 200 W peak • Up to 70 A continuous output current / 100 A peak • Wide 40 V to 60 V input voltage range • Power density exceeding 300 W/in3 • Parallel up to six “stamps” with automatic phase shedding • Flat efficiency curve over wide load ranges • Source and sink mode for fast transient response • Isolated power train • Secondary side fully digital control • PMBus® with configurable AVS or Intel SVID interface Input Voltage Output Voltage Output Current Output Current Efficiency Part Number [V] [V] [A] [A peak] (Typical) MAIN Power Stamps STM48-1V8M070-xxx 40 – 60 1.6 – 2.0 70 100 94% STM48-1V2M070-xxx 40 – 60 1.16 – 1.26 70 100 91.6% STM48-1V0M070-xxx 40 – 60 0.9 – 1.1 70 100 91% SATELLITE Power Stamps STM48-1V8S070-xxx 40 – 60 1.6 – 2.0 70 100 94% STM48-1V2S070-xxx 40 – 60 1.16 – 1.26 70 100 91.6% STM48-1V0S070-xxx 40 – 60 0.9 – 1.1 70 100 91% Controller IC STPSA60 - - - - - Evaluation board for the VR13 HC “Ice Lake” reference design is available with P/N STM48-1V8S070-EB. www.powerstamp.org

Network Attached Controller for Power Shelves The NACx006-01 is a shelf level controller providing monitoring and control functions through a 10/100MB base Ethernet port and can be connected directly to the data center management network. It is hot pluggable and supplied via the 12 V standby provided by the power supplies in the shelf. Product Highlights • 2 models available: » NAC1006-01 for AC/DC 240 / 277 VAC Power Shelves » NAC2006-01 for DC/DC (-48 VDC), HVDC/DC (+380 VDC) Power Shelves • 10/100 Mb Ethernet port • HP Auto MDI/MDI-X to reliably detect and correct crossover cables • Web interface for easy setup • SNMPv1/2c/3 protocol with TRAP, SET and GET over Ethernet • Directly supplied from shelf standby voltage; low consumption • Hot-plug capable • Fits in all OCP shelves; front accessible For more information, please contact us: North America +1 408 785 5200 Asia-Pacific +86 755 2988 5888 Europe, Middle East +353 61 225 977 belfuse.com/power-solutions bcb.00164_ac data center & ocp solutions © 2018 Bel Power Solutions & Protection