1/2ページ
Download(547.8Kb)
Pinhole Inspection Machine - Hydrogen Leak Detector
Product Catalog
Recommended for leak testing of packaging containers! Low cost, safe, high accuracy inspection system using hydrogen gas!
More Details
https://www.yamahafinetech.co.jp/en/fa_products/h_leakdetector/
Document Information
Document Title | Pinhole Inspection Machine - Hydrogen Leak Detector |
---|---|
Document Type | Product Catalog |
File size | 547.8Kb |
Category | |
Company | YAMAHA FINE TECHNOLOGIES CO., LTD. (Documents List) |
Documents related to this company
Document Contents
Page1
Hydrogen Leak Detector
YHLD-100 NEW
Incorporating the all new
YAMAHA developed MEMS※sensor
※ MEMS : Micro Electro Mechanical Systems
Detects from low to high concentration of hydrogen
High resolution with range from 0.5 to 13,000 ppm
Immediate detection alert announcement
If hydrogen concentration is over 13,000ppm (=1.3%), the system alarms & stops
Quick response to both increases and decreases of gas concentration
Fast system reset, so device is ready for next measurement extremely quickly
Consecutive measurement capability
Continuous measurement will not stop as long as hydrogen is present.
Linearity will be maintained & measurement will not become saturated, even during high concentration detection
Ease of use ● Large touch panel color LCD screen● Intuitive interactive set up and operation modes
Page2
Hydrogen Leak Detector
YHLD-100
External dimensions
195mm
320mm (259mm)
400mm
Production specification
Sensor MEMS
Detection gas Hydrogen (Recommended tracer gas ratio: 5%/hydrogen + 95% nitrogen)
Detective gas concentration 0.5-13,000ppm (1.3%)
Response time Within 1 second. (10-90% at 1,000ppm)
Controller Main panel 7.5" color LCD touch panel
(main body) Contents of display Measurement data (Value & bar graph)
Measurement unit ppm, Pa・m³/sec
Level selection Judgment point, set point
Language English or Japanese
Detailed function Line chart (time vs measurement value)
Adjustment Re-zero, "Wake-up" (means recover for sensor)
Speaker Buzzer for alert & measuring for value (concentration & leakage)
SD card Factory tuned sensor parameters are stored on the SD card
Probe Hydrogen status display on probe 9 stage multi-colored LED status indicator on probe handle
Contents of display Probe measuring display & status monitor
Adjustment Re-Zero
Power voltage, power supply AC100-240V, 50/60Hz, 9W
Weight Controller (main body) /6.3kg, probe/0.3kg, Case/0.3kg
Usage environment Temp : 5 - 50℃, Humidity : under 80% (Non-condensing)
Interface Output I/O Dsub 25pin (8/8 point, PC insulation, 12-24V)
Measurement BNC connector (analog output; DC1-5V)
Output RS232C (character, value)
Notice : The contents of this catalog are subject to change without notice.
Notice : This device is NOT classified as explosion proof. For use with under 4% hydrogen mixed air only or in accordance with applicable law.
FA Division Sales section 1 283, Aoya-cho, Minami-ku, Hamamatsu, 435-8568, Japan
FAX +81-53-467-3613 TEL +81-53-467-3601
(188.5mm)
180mm