Solving SWaP-C power challenges for MIL-COTS applications

Solving SWaP-C power challenges for MIL-COTS applications Modular solutions for your power system

On the forefront of power architectures Solving the toughest aerospace and defense power delivery challenges Vicor continues to raise the bar by delivering technologically advanced MIL-COTS power solutions that meet demanding SWaP-C requirements with all the robustness and reliability you would expect from a 30 year veteran of the aerospace and defense industry. Vicor has a portfolio of highly reliable modular components that enable military equipment designers to create SWaP-C optimized solu- tions. A good example is our DCM™ family DC-DC converters. When compared to the next-best solutions in brick packages, our innovative ChiP and VIA packages enable solutions with upwards of 2.5X improvement in power density by volume, and over 3X the power density by weight. Tethered inspection UAV Man portable digital radio Airborne equipment Light, compact power supply increases The DCM fixed switching frequency Scalable modular DCM based design, UAV payload and supports a backup (750 kHz) enables a compact EMI filter enables high power, regulated outputs battery. to meet stringent conducted noise with up to 200mF of bulk capacitance. specifications. Autonomous underwater Direct infrared Helicopter gearbox vehicle countermeasures MIL-STD power components withstand A wide-input voltage range allows Direct infrared countermeasure’s optical mechanical stresses caused by vibration full utilization of the battery, which circuitry runs cooler while meeting and acceleration in helicopter gearboxes. extended the range of the UAVs. stringent EMI specs.

MIL-COTS DCM™ isolated-regulated DC-DC converter modules Rugged high power converters for 28V and 270V line inputs The DCM is an isolated, regulated DC-DC converter, operating from an unregulated, wide range input to generate an isolated output. With its high frequency zero-voltage switching (ZVS) topology, the DCM converter delivers high efficiency across its specified input line range. Modular DCM converters used independently or with downstream point-of-load (PoL) products support efficient power distribution, providing superior power system performance and connectivity from a variety of unregulated power sources to the point of load. The DCM VIA module provides a higher level of functionality with integrated EMI filtering, tight output voltage regulation and a secondary- referenced PMBus control interface. The DCM is able to meet MIL-STD-810, MIL-STD-704, MIL- STD-1275, and DO-160 when used in conjunction with the MIL-COTS MFM filter. Features and benefits Up to 500W, Up to 93% Up to 1,032W/in3 OV, OC, UV, short 17.86A continuous peak efficiency power density circuit & thermal protection Input voltage range: Power: 9.0 – 50.0V 2322 ChiP: Up to 60W 16.0 – 50.0V 3623 ChiP: Up to 320W 160.0 – 420.0V 4623 ChiP: Up to 500W Output voltage range: 3414 VIA: Up to 320W 2.97 – 3.63V 3714 VIA: Up to 500W 3.5 – 5.5V Dimensions: 4.0 – 5.5V 2322 ChiP: 24.8 x 22.8 x 7.2mm 7.2 – 13.2V 3623 ChiP: 38.7 x 22.8 x 7.2mm 9.0 – 16.5V 4623 ChiP: 47.9 x 22.8 x 7.2mm 14.4 – 26.4V 3414 VIA: 85.9 x 35.5 x 9.4mm 16.8 – 30.8V 3714 VIA: 95.1 x 35.5 x 9.4mm 22.0 – 30.8V 28.8 – 52.8V A complete list of MIL-COTS DCMs are available at vicorpower.com/mil-cots-dcm

MIL-COTS BCM® isolated fixed-ratio DC-DC bus converter modules High-voltage bidirectional bus converters The MIL-COTS Bus Converter Module (BCM) is a high efficiency (up to 98.7%), fixed ratio module operating from a 270V input voltage and delivering an isolated 28V or 48V nominal output volt- age. The low weight, high efficiency and high power density enable our customers to meet their increasing SWaP-C requirements. The BCMs wide input range help achieve MIL-STD-704 E/F ranges without the need for external clamping. Low noise, high-frequency operation minimizes the size of the filter needed for MIL-STD compliance. The BCM enables system design flexibility and can be paralleled to create multi-kW arrays. Features and benefits MIL-STD-704E/F High efficiency up Power density Can be paralleled compliant to 98.7% >2,342 W/in3, at to create multi- 36.58W/gram kW arrays Input voltage range: Current: 200 – 330V 330 – 365V Full Chip: Up to 25.8A 200 – 400V 360 – 400V 6123 ChiP: Up to 125A 240 – 330V 400 – 700V 4414 VIA: Up to 125A 260 – 410V 500 – 800V Dimensions: Output voltage range: Full Chip: 32.5 x 22.0 x 6.7mm 8.1 – 12.8V 30.0 – 41.25V 6123 ChiP: 63.3 x 22.8 x 7.2mm 10.3 – 11.4V 31.25 – 50.0V 4414 VIA: 110.6 x 35.5 x 9.4mm 11.2 – 12.5V 32.5 – 51.3V 11.8 – 13.0V 33.4 - 55.1V A complete list of BCMs are available at 16.3 – 25.6V 41.3 - 45.6V vicorpower.com/mil-cots-bcm 25.0 – 43.7V 45.0 - 50.0V 25.0 – 50.0V

MIL-COTS VITA-62™ VITA-62 compliant power converters The VITA 62 power supply is a MIL-COTS power supply that is designed for 3U Open VPX systems. This rugged, conduction-cooled model operates from a nominal 28V or 270V DC input, with predefined output voltages ranging from 3.3V to 12V, delivering up to 600W of power. Customers requiring different output voltages or power levels can request a customized power supply to meet their own specifications. This family of products has been fully tested to meet MIL-461F and MIL- 704F. In addition the 28V input version also meets MIL-1275D. Features and benefits 3U 3U open VPX Over-current, MIL-STD 704F, No electrolytic power supply -voltage & -temp 461F, 810G, capacitors protections 1275D Input voltage range: Output power: 18.0 – 50.0V 600W total power 220.0 – 320.0V Dimensions: Output voltage: 3U (3.9 x 6.6 x 1.0in) +12V at 40A +5V at 30A A complete list of VITA-62 power supplies are +3.3V at 20A available at vicorpower.com/vita-62 +3.3V at 6A +12V at 1A -12V at 1A

ZVS buck and buck-boost switching non-isolated DC-DC regulators Wide range direct to PoL regulators This series of regulators offer board-level designers maximum power density and flexibility for high-efficiency point-of-load DC-DC regulation. High performance Zero-Voltage Switching (ZVS) topology increases point-of-load performance, providing best-in-class efficiency up to 98%. They are highly integrated with control circuitry, power semiconductors and support components in a high density System in Package (SiP). It can also be configured to operate in constant-current mode and is available in BGA tin-lead packages with -55°C to +115°C operation. Features and benefits Wide operating Simple to use; High efficiency of Flexible and range fast development over 98% rich feature set ZVS buck regulators ZVS buck-boost regulators Input voltage range: Input voltage range: 8.0 – 18.0V 14.0 – 42.0V 30.0 – 60.0V 8.0 – 60.0V 16.0 – 34.0V 21.0 – 60.0V 8.0 – 36.0V 17.4 – 36.0V 36.0 – 60.0V Output voltage range: 11.0 – 36.0V 20.4 – 36.0V 10.0 – 50.0V 12.0 – 34.0V 21.0 – 36.0V Output voltage range: 36.0 – 54.0V 1.0 – 1.4V 2.2 – 4.0V 4.0 – 5.5V Power: 1.4 - 2.0V 2.3 – 4.1V 4.0 – 6.5V Up to 200W 2.0 – 3.1V 2.6 – 3.6V 6.5 – 13.0V Dimensions: 2.2 – 3.0V 3.3 – 6.5V 6.5 – 14.0V BGA Sip: 10.5 x 14.5 x 3.1mm (tin-lead available) 2.2 – 3.8V 3.8 – 6.5V 10.0 – 16.0V LGA SiP: 10.0 x 14.0 x 2.5mm Current/Dimensions: 7.0 x 8.0 x 0.85mm GQFN SiP: Up to 10A A complete list of buck and buck-boost regulators 10.0 x 10.0 x 2.5mm LGA SiP: Up to 10A are available at vicorpower.com/buck and 10.0 x 14.0 x 2.5mm LGA SiP: Up to 22A vicorpower.com/buck-boost 10.5 x 10.5 x 3.1mm BGA SiP: Up to 10A 10.5 x 14.5 x 3.1mm BGA SiP: Up to 10A

Vicor: Enabling a competitive advantage High-performance modular power systems achieve higher levels of flexibility and scalability than ground-up custom designs. Our continual advances in power distribution architectures, conversion topologies and packaging technology will keep you ahead in system efficiency and density, converting and managing power from the source to the point-of-load. www.vicorpower.com/defense-aero Generating complete power systems Just enter a few specs to design your next power system Power System Designer Designing your power system in a single Show me pricing for 100 power systems location — up to 75% faster than traditional methods — is as easy as entering your input Enter your power requirements and output power as well as your basic Input specifications: system requirements. The Power System AC DC 400VDC min input 400VDC nom input 400VDC max input Designer is one of the Vicor web-based tools Output specifications: that makes it easy for you to build flexible, Output 1 Enter optional output name Remove Isolation required Isolation not required Regulated Fixed Ratio efficient and cost-effective power systems Enter min output voltage 48V nom output Enter max output voltage that get you to market faster. 100W Power Current ■ Instant performance analysis for Output return: Output 1 recommended solutions Output 2 Enter optional output name Remove Access an infinite number of products Isolation required Isolation not required Regulated Fixed Ratio■ Enter min output voltage 24V nom output Enter max output voltage and technical specs 200W Power Current ■ Evaluate power chains electrically and Output return: Output 1 mechanically ADD ANOTHER OUTPUT UPDATE SOLUTIONS Reset ■ Prioritize solutions by efficiency, UPDATE SOLUTIONS component count, cost, footprint and recommended best fit ■ Save, export and share a final BOM or power system Start your next design at www.vicorpower.com/psd

Modular solutions for your power system from source to point-of-load M M CM PoLCM D MC VTM PRM ZVSuckB CMD 48V NB M M NB CMB M DC 12V 0V RFM38 9V-00V4 AC Enabling a competitive advantage High-performance modular power systems achieve higher levels of flexibility and scalability than ground-up custom designs. Our continual advances in power distribution architectures, conversion topologies and packaging technology will keep you ahead in system efficiency and density, converting and managing power from the source to the point-of-load. ©2019 Vicor Rev 1.1 10/2020