Real time mask fitting tester MT-R1

Real time mask fitting tester MT-R1 Real time measurement of leakage rate and internal pressure of various masks at the same time MT-R1 can measure the adhesiveness of respiratory protection with electric fan or dust mask used in various worksites continuously and in real time. As measurement result is displayed graph in the main unit, you can confirm the correct wearing of mask checking the fitting status. ＭＴ-Ｒ１型 Feature ●By using indoor dust, you can measure continuously leakage 　rate and internal pressure of mask at wearing various masks ●Measurement result is displayed graph and numeric value in 　the main unit and updated in real time. ●Easy change of setting by touch panel in the display. ●After measurement of particles inside and outside of mask 　for certain period, it can display the measurement result of 　leakage rate. ●By inserting the experimental guide bar into the mask, 　automatically it will start measurement. ●Diameter of measured particle can be chosen at either more 　than 0.3 μm or more than 0.5μm. ●Special case is included. ■Use ●Metal welding site, Nanomaterial, Road, Asbestos, Exposure 　prevention for the people working in nuclear facility 　(Confirming adhesiveness of mask, training of wearing mask, 　education) ●Evaluation of respiratory protection with electric fan ●Confirmation of protection factor 起動画面 漏れ率測定モード

Specification Model ＭＴ-Ｒ１ Measurement Leakage rate : 2 units of particle co unter using light scattering method Method Tetrahedral internal pressure : Silicon diaphragm sensor Diameter of Measured Particle Can choose (1) more than 0.3μm or (2) more than 0.5 μm Measurement Leakage rate : 0～100% Range Tetrahedral internal pressure : ＋－500Pa Graph Dis play of Leakage rate: Update the value calculated from number ratio for minimum 1 sec in every 0.1 secMeasurfment Result Tetrahedral internal pressure : Update the garaph in every 0.1 sec Suction Flow Rate Can set in every 1 sec from 1～999 second 1L/min Leakage Rate Calculation Formula Leakage rate (%)= Number of particle inside of mask/number of particle outside of mask x100 Usage Environment 0～40 ℃　　30～90％rh (No condensation) Power AC100V 50/60Hz 2A Measurement , ４３０（W）×３９０（D）×２００（H）㎜ Weight Approx. 12kg Price¥ Please ask ■Consumable Spares Item Special Guide 10 pcs/set Tube 20m Connector Zero Filter Specifications, and appearance described in this document are based on information as of August 10, 2015. They are subject to change without notice for improvement of the product. 1-1-62, Nakane Soka-City, Saitama, Japan TEL:+81-48-933-1582　FAX:+81-48-933-1591 E-mail:overseas@sibata.co.jp http://www.sibata.co.jp/english/ 201508K