Dispensing Product Guide

olution volution echnology Dispensing Product Guide Head office; 7-1-15 Kashiwa, Kashiwa-shi, Chiba 277-0005 Japan Branch offices; Sendai, Nishi-Kanto, Kanagawa, Nagoya, Osaka Techno Laboratory 313-206 Toyofuta, Kashiwa-shi, Chiba 277-0872 Japan Overseas bases; SAN-EI TECH LTD. (SHANGHAI) Room1609-1611, Huijin Building, NO.123,Suzhou Dadao East, Suzhou Industrial Park, Suzhou, China 215000 TEL. +86-512-6515-1866　FAX. +86-512-6515-4348 San-Ei Tech (Thailand) Co., Ltd. 1588/2 Debaratana Rd, Bangnatai, Bang Na, Bangkok 10260 TEL.&FAX. ＋66-0-2161-0810 SAN-EI TECH（TAIWAN） 36F, No. 80, Sec. 1, Zhongxiao W. Rd., Zhongzheng Dist., Taipei City 100 , Taiwan (R.O.C.) TEL. +886-2-2371-6636 https://www.san-ei-tech.co.jp/global Product video ※Specification and technical details are subject to change without prior notification. 2026.7

1 Diispensiing Components Safety information ▶▶ Syringe・Piston Wide range of components available for Syringes specific application needs Size Clear UV-block Black Pcs per box 5cc SO-SLL-B S0-SLB-B SO-SUV-B 40 High quality and excellent dimensional stability ensure easy handling and highly precise fluid dispensing. 10cc SO-10LL-B S0-10LB-B SO-10UV-B 30 30cc SO-30LL-B S0-30LB-B SO-30UV-B 20 55cc SO-SSLL-B S0-SSLB-B SO-SSUV-B 15 material: polypropylene *Bagged End caps Snap-type end cap for easy attachment and removal. Double-wiper Pistons High-precision UV-blocking syringe Low-friction, smooth piston movement prevents dripping Completely blocks ultraviolet light. Using new technology, no UV-blocking agents are used at all, which means no leaching. and leakage. Remaining fluid can be easily checked visually. Completely shuts out chemical smells as well. UV light transmission comparison graph. Inner bottom of syringe Blocks UV and visible light up to 500 nm. Maintains constant contact pressure with the piston for highly precise dispensing. Dispenses even high-viscosity fluids completely without waste. Others SET High-Precision Dispensing Components “Zero taper” fully straight design syringe. Pistons Extremely tight moulding tolerances. Size Pink Green Orange Blue Pcs per box 5cc SO-SPEP-B SO-SPEM-B SO-SRPE-B SO-SRPEA-B 40 10cc SO-10PEP-B SO-10PEM-B SO-10RPE-B SO-10RPEA-B 30 Clean, uniform and rigid barrel wall thickness. 30cc/55cc SO-30PEP-B SO-30PEM-B SO-30RPE-B SO-30RPEA-B 20 material: polyethylene No separation between fluid and the inner wall of the syringe. Standard Loose Reverse-wiper structure to for low-mid viscosity for high viscosity prevent piston bounce No burrs, black specks, or air bubbles. Reverse-wiper structure eliminates piston bounce. Transparent tip hub Allows safe and reliable attachment. End caps Tip cap Tip caps Size Part number Pcs per box Size Part number Pcs per box SH13G-B 5cc SM-SECG-B 40 SH13G-B 50 All models Luer-lock style tip cap 10cc SM-10ECG-B 30 SH13TG-B 50 30/55cc SM-30ECG-B 20 material: polyethylene for exceptional safety. material: polyethylene SH13TG-B 4 5

Syringe adapters Cartridge Systems Adapter assemblies Cartridge Systems One-piece, molded adapter (polyacetal) with O-ring attached. Disposable plastic cartridges are available in 75cc, 180cc, 360cc, 600cc and 910cc capacities. Assembly includes polyurethane tubing, BUNA O-ring and quick connect. Outer container is durable up to 0.69MPa. Quick connector (standard) Metal type connector Type 75cc（2.5oz） 180cc（6oz） 360cc（12oz） 600cc（20oz） 910cc（32oz）pcs Size φ4mm φ6mm φ4mm φ6mm sets/box 0.9m 1.8m 0.9m 1.8m 0.9m Inner cartridge 5190C 5192C 5194C 3704 3705 10 3cc 1000BSH48 1000BSH48-6 1000DSH48 1000DSH48-6 1000BSH48-ST 1000DSH48-ST 1 Standard (black) 5196 − 10 5cc 1000BSH49 1000BSH49-6 1000DSH49 1000DSH49-6 1000BSH49-ST 1000DSH49-ST 1 Plunger Wiper type (translucent) 10cc 1000BSH50 1000BSH50-6 1000DSH50 1000DSH50-6 1000BSH50-ST 1000DSH50-ST 1 5196WP-LD 3709 10 30/55/75cc 1000BSH52 1000BSH52-6 1000DSH52 1000DSH52-6 1000BSH52-ST 1000DSH52-ST 1 Pressure relief type (translucent) 5196PRS − 10 Material: polyacetal (adapter), polyurethane (tubing), BUNA (O-ring)　Length of tubing for metal type connector is 0.9M　* Metal type connectors are compatible with most other dispensers End cap A605 3703 10 Tip cap 5192RT 10 Cap SAR65R SAR95R SAR3700CAP 1 Outer cartridge Gasket for cap 560066 SAR95G SC40222（O-ring） 1 Body SAR90R SAR92R SAR94R SAR3720R SAR3732R 1 Inter connect hose ST10 1 Tip adapter SF86 1 Quick connector (standard) Metal type connector Inter connect hose Replacement O-rings (for adapters) Tight tolerances ensure safe, secure attachment and prevent leaks without slipping off. Outer cartridge (cap) BUNA VITON EPR Size nitrile rubber fluorine-contained rubber ethylene-propylene rubber Pcs per box 3cc SH48R-B SH48RV-B SH48RE-B 10 Inner cartridge 5cc SH49R-B SH49RV-B SH49RE-B 10 Cartridge reservoir 10cc SH50R-B SH50RV-B SH50RE-B 10 Plunger 30/55/75cc SH52R-B SH52RV-B SH52RE-B 10 Outer cartridge (body) Dimensions for outer cartridge Cartridge A B Adapter for barrel-to-barrel fitting 75cc 95mm 46mm (common in 3cc, 10cc, 30cc, 55cc, 75cc syringes) 180cc 178mm 49mm This is convenient for filling a prefilled mid-to-high viscosity material Syringe system 360cc 308mm 49mm in a syringe into several small barrels. 600cc 268mm 71mm Syringe adapter material part number pieces per pack 910cc 370mm 71mm polypropylene SF60 10 Tip adapter Piston Nozzle Syringe A A A Special tip Nozzle ＊Please refer to “Nozzle Components” on page 9. B B B 75cc 180cc/360cc 600cc/910cc 6 7

2 Nozzlle Components Safety information ▶▶ General purpose tips・Small area tips Precise, consistent dispensing is determined by the type of dispense tip selected GP needle tips TT tapered tips Without burrs or flash, precision dispense tips produce the very A wide variety of needle lengths and diameters can be General best deposit control. selected for general application. purpose TT tapered tip provides smooth flow General minimizing air entrapment. Gel-type purpose Burr-free, polished tips provide consistent fluid flow. cyanoacrylate adhesives can also be An extensive lineup of dispense tips allows for conformance with applied. Needle length various materials, work pieces and applications. Gauge 6.4mm 12.7mm 25.4mm 38.1mm Hub color Pcs per box ID size OD size Material (0.25″) (0.5″) (1″) (1.5″) Gauge mm（in) mm（in) Color Pcs per box standard opaque rigid 14 SH14-0.25-B SH14-B SH14-1-B SH14-1.5-B olive 50 14 1.60 2.03 (.062″) (.079″) SH14TT-B SH14RTT-B olive 50 15 SH15-0.25-B SH15-B SH15-1-B SH15-1.5-B amber 50 16 1.19 1.63 (.047″) (.064″) SH16TT-B SH16RTT-B gray 50 18 SH18-0.25-B SH18-B SH18-1-B SH18-1.5-B green 50 18 0.84 1.25 (.033″) (.049″) SH18TT-B SH18RTT-B green 50 20 SH20-0.25-B SH20-B SH20-1-B SH20-1.5-B pink 50 20 0.59 1.02 (.023″) (.040″) SH20TT-B SH20RTT-B pink 50 21 SH21-0.25-B SH21-B SH21-1-B SH21-1.5-B purple 50 22 0.41 0.81 (.016″) (.016″) SH22TT-B SH22RTT-B blue 50 22 SH22-0.25-B SH22-B SH22-1-B SH22-1.5-B blue 50 25 0.25 0.79 (.010″) (.031″) SH25TT-B SH25RTT-B red 50 Precisely-molded flat sealed seat Polished burr-free tips ensure 23 SH23-0.25-B SH23-B SH23-1-B SH23-1.5-B orange 50 27 0.20 0.41 (.007″) (.016″) ー SH27RTT-B white 50 at hubs provides unrestricted accuracy 25 SH25-0.25-B SH25-B SH25-1-B SH25-1.5-B red 50 standard： polyethylene fluid flow opaque rigid： polypropylene 27 SH27-0.25-B SH27-B ー ー clear 50 30 SH30-0.25-B SH30-B ー ー lavender 50 Color coding for tip sizes (GP needle tips, angled tips) 32 SH32-0.25-B 　ー ー ー yellow 25 Color Gauge ID size（mm） OD size（mm） hub： polypropylene shaft： 304 stainless steel olive 14 1.55 1.83 amber 15 1.37 1.65 Angled tips PP flexible tips General Angle shaft allows for reaching under or inside work. General Polypropylene shaft reaches into hard-to-access areas purpose green 18 0.91 1.27 Available with 45° and 90° bends and 10 different tip purpose and will not scratch delicate surfaces. diameters ranging from 14 to 30 gauge. pink 20 0.61 0.91 Needle length Needle length Gauge ID size OD sizepurple 21 0.51 0.81 Pcs per box Gauge 12.7mm/45° 12.7mm/90° Hub color Pcs per box mm（in) mm（in) 12.7mm 38.1mm Hub color (0.5″) (1.5″) (0.5″) (0.5″) blue 22 0.41 0.71 15 1.35 1.65 14 SH14-B-45 SH14-B-90 olive 50 (.053”) (.065″) SH15PPS-B SH15PP-B amber 50 orange 23 0.33 0.64 18 0.80 1.21 15 SH15-B-45 SH15-B-90 amber 50 (.032″) (.048″) SH18PPS-B SH18PP-B green 50 red 25 0.25 0.51 20 0.47 0.85 18 SH18-B-45 SH18-B-90 green 50 (.019″) (.033″) SH20PPS-B SH20PP-B pink 50 clear 27 0.21 0.41 25 0.40 0.80 SH25PPS-B SH25PP-B red 50 20 SH20-B-45 SH20-B-90 pink 50 (.016″) (.032″) lavender 30 0.16 0.31 hub： polypropylene 21 SH21-B-45 SH21-B-90 purple 50 shaft： polypropylene yellow 32 0.11 0.23 22 SH22-B-45 SH22-B-90 blue 50 23 SH23-B-45 SH23-B-90 orange 50 25 SH25-B-45 SH25-B-90 red 50 Flexible shaft will not scratch delicate surfaces. Dimensions (example) 27 SH27-B-45 SH27-B-90 clear 50 unit：mm 30 SH30-B-45 SH30-B-90 lavender 50 hub： polypropylene shaft： 304 stainless steel Chamfered tips Precision chamfering minimizes surface contact area of wetted tips Small for dispensing microdots with low viscosity fluids. area Tip Needle length Gauge ID size OD size 6.4mm 7.0mm 9.5mm 12.7mm Hub color mm（in) mm（in) Pcs per box (0.25″) (0.28″) (0.37″) (0.5″) 23 0.34 0.64 (.013″) (.025″) ー ー ー SH23CH-B orange 50 25 0.26 0.51 (.010″) (.020″) ー ー ー SH25CH-B red 50 27 0.21 0.41 (.008″) (.016″) SH27CH-0.25-B ー ー ー clear 25 30 0.17 0.51 (.007″) (.020″) ー ー SH30CH-B ー red 25 GP GP GP GP TT Chamfered TLC Brush 33 0.11 0.41 (.004″) (.016″) ー SH33CH-B ー ー clear 25 Tip image hub： polypropylene shaft： 304 stainless steel * Values on ID, OD are for tip orifice. 8 9 6.4 23.8 12.7 30.1 25.4 42.8 38.1 55.5 31.3 7.0 24.4 27.0 2.2 46.6 41.0 50.2

Specialty tips・Lab Kit Metal tips and nozzles TLC PTFE-lined tips Metal needle tips Super-Fine ceramic nozzles PTFE inner lining inside shaft resists clogging of cyanocrylates. 13mm tip is the standard length with other customized lengths available. (one per unit) Nozzle sizes can be manufactured in increments of 5μm Tip teflon Tip teflon Needle Needle length Part number ID size OD size from a nozzle inner diameter of 0.005mm Gauge OD size ID size OD size Hub color Pcs per box mm(in) mm(in) Pcs per box mm（in) mm（in) mm（in) 16.５mm 29.２mm 21 1.18 0.68 1.65 (.046″) (.027″) (.065″) SH21TLCS-B SH21TLC-B gray 50 SSN-20 0.65 0.89 (.026″) (.035″) 12 material: 303 stainless steel SSN-21 0.53 0.81 shaft: ceramic (zirconia) 25 0.76 0.30 1.27 (.030″) (.012″) (.050″) SH25TLCS-B SH25TLC-B pink 50 (.021″) (.032″) 12 shaft neck: double-threaded screw SSN-22 0.47 0.71 hub: Polypropylene (.019″) (.028″) 12 shaft: 304 stainless steel SSN-23 0.38 0.64 inner lining: PTFE (low surface energy) (.015″) (.025″) 12 SSN-24 0.34 0.56 (.013″) (.022″) 12 SSN-25 0.33 0.51 Oval tips Tip shields for light-sensitive and (.013″) (.020″) 12 SSN-26 0.25 0.45 Oval stainless steel tips apply thick material in about 2mm UV-cure materials (.010″) (.018″) 12 width flat ribbon deposits. SSN-27 0.21 0.41 (.008″) (.016″) 12 Syringe size Part number Color Pcs per box SSN-28 0.18 0.38 Needle length (.007″) (.015″) 12 Gauge Color Pcs per box 3cc SH03 red 10 12.7mm 5～55cc SH06 black 10 shaft neck: Ni plate, 15 SH15OVAL-B amber 50 shaft: 304 stainless steel Outlet size (ID)：1.98×0.41mm hub: Polypropylene shaft: 304 stainless steel Brush tips Nylon bristles will not damage work surfaces and are best Metal nozzles (one per unit) Smooth inner surface of the nozzle prevents clogging for spreading glues and greases. Available in soft or stiff bristles. High precision nozzle machined as a single and ensures consistent fluid flow component provides smooth fluid flow. Style Standard High flow Color ・Double-threaded-screw type nozzle allows Cross-cut picture (standard) soft SH40A SH40HF white Part number ID size OD size mm(in) mm(in) for secure attachment to a syringe stiff SH41A SH41HF black SPN-40 0.40 0.50 ensuring excellent air tightness. (.016″) (.020″) bristle: nylon SPN-35 0.35 0.45 ・Chamfered-type tip reduces residue of a (.014″) (.018″) thick paste, which is ideal for minute SPN-30 0.30 0.40 High flow nozzles dispensing amounts. (.012″) (.016″) SPN-25 0.25 0.35 High flow nozzles can be used with SV35 or SV45 valves to achieve (.010″) (.014″) higher flow or higher transfer efficiency. No clogging and ensures smooth fluid flow mounting: 1/4 NPT SPN-20 0.20 0.30 (.008″) (.012″) SPN-15 0.15 0.25 ■ Special nozzles ■ High pressure resistant nozzles (.006″) (.010″) SPN-10 0.10 0.20 Part number Length × outlet (mm) Pcs per pack Part number ID(mm) OD(mm) Pcs per box (.004″) (.008″) SN80 63.5×φ3.2 10 SH008-1/4NPT 3.64 4.20 1 material: 303 stainless steel shaft neck: double-thread screw SN81 63.5×φ1.6 10 SH010-1/4NPT 2.84 3.40 1 minimum inner diameter must be 10mm. SN82 101.6×φ1.6 10 SH012-1/4NPT 2.40 2.76 1 SN83 101.6×φ0.8 10 SH016-1/4NPT 1.25 1.61 1 Dimension(sample) unit：mm Lab Kit SH100-SK Lab Kit SH100-SK offers an assortment of dispensing components specifically for new users of dispensers or those who require the best dispenser according to a particular application. The Nozzle Kit includes nozzle sizes ranging from 14G for general purpose to 30G for minute dispensing amounts. Metal needle tips Metal nozzles Ceramic nozzles Contents ・Nozzle Kit … 1 set ・3cc/5cc/10cc/30cc/55cc syringe（clear・UV block）…4 for each ・3cc/5cc/10cc piston …8 for each *Please indicate the part number as “SH100” if you would like to ・30cc&55cc piston… 16 for each purchase only the Nozzle Kit. ・3cc/5cc/10cc/30cc&55cc syringe adapter…1 for each 10 11 13.0 13.0 23.2 23.2

3 SDP Seriies Diispensers Specifications SET Dispensers for superior quality and best yields SDP520 SDP420 in precision assembly processes Power VDC24（VAC100-240 adapter） Power Consumption 18W SDP Series Dispensers are designed to optimize the Air Input Requirement 0.7MPa Maximun　Note: Clean, dry filtered factory air or five micron filter regulator is required. dispensing of adhesives, lubricants and other assembly fluids by increasing throughput, improving yields and Pressure setting range 0～0.60MPa 0～0.50MPa reducing production costs. Time setting range 0.005～999.9sec Start input Footpedal, Band switch, signal for VDC5-24（I/O） I/O D-sub 9 pin connector Storage condition 5℃-40℃（non-condensing） SDP520 External dimensions ( ) including protruding portion W250×D139(187)×H76(78) W160×D139(176)×H76(78) Most versatile, all-digital display Weight 1.6ｋｇ 1.0ｋｇ for optimal process control Accessories AC adapter　Foot pedal switch SDP520 dispensing controller is ideal for a wide variety of applications that involve manual operation or automated features processes. All-digital display provides easy programming for the Regulator type precise processes that require a high degree of process control. Vacuum function yes Display dispense timing digital air pressure digital vacuum pressure digital analog SDP420 Teaching function yes Programmable dispensing ensuring Internal air pressure circuit ○ ー a high degree of process control unit：mm SDP420 dispensing controller is designed to control many applications of various assembly fluids to improve yields and Dimensions (unit：mm) reduce production costs. SDP400 features vacuum function, SDP520 SDP420 TEACH function and internal air pressure reservoir to enhance consistency in dispensing. 250 160 SDP420 VACUUM VACUUM PRESSURE PRESSURE SHOT MODE POINT Fn SHOT MODE POINT Fn VACUUM PRESSURE MPa OPERATING OPERATING KPa MPa SDP520 12 13 (78) (178) 76 139 (8.5) (78) (167) 76 139 (8.5)

4 SV Seriies Vallves Spray valves Best for spraying of thin coatings or markings with low viscosity fluids P24, 25, 26, 28 Precision valve systems ‒ low maintenance, rugged and reliable SV91 <High viscosity spray valve> ・Low volume, low pressure spray coatings enable high transfer efficiency The best valve can be selected according to the characteristics of the use ・No overspray, no misting materials and the requirements for applications ensuring high quality dispensing. Diaphragm valves Accurate and speedy shut-off movement provides no drips P18,19 SV01S ・Used for spraying higher viscosity materials ・Controlled spraying without splattering SV59MS ・Low pressure, very fine volume spraying coatings ・No overspray, no misting SV62-B SV12 Spray valve controller SV92FL SV62 ・Enables fine-line spraying below ・Compact size and lightweight construc- ・ Ideal for applying anaerobic UV ・Extremely small design (length: Low volume low pressure air allows 1.0mm high transfer efficiency without mist tion allows for easy installation adhesives 63.2mm weight:85g) or overspray. ・Stable spraying of low-viscosity ・UHMW polymer wetted chamber and ・ Wetted parts made of resin ・Easy installation for small spaces materials diaphragm valve is best for reactive- enable to be used for reactive SVC620S materials materials Needle valves Best for consistent small amount applications with various adhesives, solvents or other mid-to-high viscous fluids P20, 21 Conformal coating valves Fast, precise conformal coating for moisture-proof material P27, 29 SV59MD SV70 ・Consistent microdots with a variety of ・Best for application of thin film coating assembly fluids of moisture-proof material in clearly ・Unique sealing structure enhances SV01CS defined patterns durability ・Square-cut carbide nozzle reduces ・Spray coating of medium- to clogging and increases reliability Valve controller SVC720V　 high-viscosity fluids ・Large area coverage with low flow rates ・Coating without masking, enabled Consistent, precise volume control by reduced mist dispersion for high precision dispensing valves SV51 ・Unique packing structure enhances durability SVC720V ・Drip-free design ensures Spray valve controller Valve Controller millions of cycles specified for SV70 Low volume low pressure air allows Valve Fluid Flow Reference high transfer efficiency without mist Along with excellent or overspray. high-speed response, 500 precise thin-film patterns of Solenoid valve Solenoid valve conformal coating can be SVEM720 SVEM59 Piston valves SV35HF SVC620S obtained. SVC720F Reliable shut-off feature clearly cuts off deposits ofmid-to-high 400 viscous fluids like sealants P22, 23 SV35DA High pressure spool valve SV35DA 300 Allows for high speed transferring of high viscosity sealants, ・Fluid volume is adjustable greases and other high viscosity materials P30 using finely graduated micrometer control 200 ・Pullback movement ensures SV47 clean cuts off of fluids 100 ・Designed to withstand high pressure dispensing of fluids (up to 17.2MPa) SV62 SV12 SV51 ・Easy maintenance SV35HF ・High pressure transferring pump can be connected ・Allows for achieving a higher 0 fluid flow than SV35HF 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 ・Especially suited for filling fluid pressure[MPa] applications ■ Condition: without nozzle, valve activating pressure: 0.5MPa Material used: water 14 15 fluid flow[mL/sec]

Valve specifications Application For low viscosity fluids For low-to-mid viscosity fluids For mid-to-high viscosity fluids For spray coating For conformal coating High pressure spool valve SV62 SV62-B SV12 SV51 SV59MD SV35DA SV35HF SV91 SV92-FL SV59MS SV01S SV01CS SV70 SV47 Model High pressure Valve type Diaphragm type Needle type Piston valve type Needle type air atomizing spray nozzle Needle type balanced-spool type Weight 154g 154g 85g 312g 244g 379ｇ 333ｇ 294ｇ 150g 280g 312ｇ 312ｇ 334g 850g and size φ26.9×79.0mm φ26.9×79.0mm φ18.9×63.2mm φ26.9×113.0mm φ27mm×79mm φ28.5×141.0mm φ31.1×100.0mm φ26.9×105mm φ21×57mm φ27mm×91mm φ26.9×105mm φ26.9×143mm φ26.9×141mm φ38.1X 135mm UHMW Teflon or UHMW PTFE,FKM,PP UHMW UHMW Teflon or UHMW SUS303 PTFE,FKM,PP SUS303 SUS303 Teflon or UHMW UHMW Wetted UHMW UHMW parts 303 stainless 303 stainless 303 stainless 303 stainless 303 stainless 303 stainless 303 stainless FKM Teflon Teflon 303 stainless 303 stainless steel steel steel steel steel steel steel steel steel Valve applications Diaphragm type, Needle, Piston type Needle type (with syringe) Fluids Microdots Dots Potting/ Lines/Stripes Filling/ Encapsulating Packaging Micro Spray Spray 5μ filter regulator Moisture-proof coating 5μ filter regulator material SV59MD SV51 ー SV70、SV51 ー SV59MS SV01CS Syringe Valve control air hose (black) Anaerobic adhesive SV22 SV62、SV22 ー SV62、SV22 ー ー ー Fluid feeding hose adapter Brazing paste Valve control air hose (black) ー SV35DA ー SV35DA SV35HF ー SV01S Syringe Cyanoacrylate SV22 SV62、SV22 ー SV62、SV22 ー ー ー VALVE PRESSURE FLUID PRESSURE SHOT MODE POINT Fn VALVE FLUID MPa MPa SVC720V Electrolytes SV51 SV62、SV22 ー ー SV62 SV59MS SV91 VALVE PRESSURE FLUID PRESSURE Dispensing controller SHOT MODE POINT Fn VALVE FLUID SVC720V Epoxy adhesive SV59MD SV51 SV35DA SV35DA SV35HF ー SV01S MPa MPa SVC720V Fulid inlet fitting Dispensing controller Fluxes SV59MD SV51 ー SV51 ー SV59MS SV91 SVC720V SV51MD Greases SV51 SV35DA ー SV35DA SV35HF ー SV01S SV51 Fluid reservoir SV35DA SV62 High viscosity greases ー SV47 ー SV47 SV47 ー ー Oils SV59MD SV51 ー SV51 SV35HF SV59MS SV91 Spray type High pressure spool type Inks SV59MD SV51 ー SV51 ー SV59MS SV91 5μ filter regulator Reagents SV59MD SV51 ー ー ー SV59MS SV91 Valve control air hose (black) RTV/sealants SV51 SV35DA SV35DA SV35DA SV35HF ー SV01S 5μ filter regulator Valve control air hose (black) Resists ー SV35DA ー SV35DA SV35HF ー SV01S Fluid feeding hose Fluid feeding hose Solvents SV59MD SV51 ー SV51 SV35HF SV59MS SV91 Solder pastes ー SV35DA ー SV35DA ー ー ー Nozzle air VALVE PRESSURE FLUID PRESSURE SHOT MODE POINT Fn VALVE FLUID hose (white) MPa MPa SVC720V UV curable adhesive SV59MD SV51 SV62-B SV62-B SV35HF SV59MS SV01S Dispensing controller VALVE PRESSURE SPRAY PRESSURE SV91 SHOT MODE POINT Fn VALVE SPRAY SVC720V Fulid feeding pump UV curable adhesive (anaerobic) SV22 SV62-B、SV22 SV62-B SV62-B、SV22 SV62-B ー ー MPa MPa SVC620S Emulsion adhesive ー SV35DA ー SV35DA SV35HF ー SV01S Spray valve controller Fluid reservoir SV47 SVC620S *This chart is only for reference. Compatibility with the actual fluid to be used requires individual testing. 16 17 SV62 SV91 SV62 SV62 SV12 SV51 SV51 SV59 SV35 SV35 SV91 SV59

Diaphragm valves SV62-B Precision compact diaphragm for accurate flow control SV62-B precision diaphragm valve, using black UHMW* resin, wh ich featu res super io r chemica l res is tance and SV62 precision diaphragm valve is designed to dispense controlled fluid-shielding property, enables to dispense low-viscosity amounts of low to medium viscosity fluids such as solvents, fluids such as UV adhesives and UV anaerobic adhesives cyanoacrylates, anaerobics and fluxes without chemical reaction by consistently without dripping. isolating fluid from internal parts. Specifications Specifications Size φ26.9mm (Fluid body) x 79.0mm length Size φ26.9mm (Fluid body) x 79.0mm length Weight 154g Weight 154g Air cylinder body SUS303 Air cylinder body SUS303 Diaphragm Diaphragm UHMW* UHMW* Valve head Valve head UHMW* UHMW* Tip adapter Tip adapter Polypropylene Polypropylene Fluid outlet port Fluid outlet port 1/8NPT female 1/8NPT female Mounting hole Mounting hole M5 female M5 female Valve operating air pressure Valve operating air pressure 0.4～0.62MPa 0.4～0.62MPa Maximum fluid pressure Maximum fluid pressure 0.48MPa 0.48MPa *Ultra High Molecular Weight *Ultra High Molecular Weight Mini-diaphragm valve for controlled, consistent coatings where space is How the Valve Operates limited Input air pressure retracts the diaphragm seal, permitting fluid to flow. (Figure 1) Once the cycle is completed, the spring retracts the piston and the diaphragm SV12 mini-diaphragm, about 60% smaller than SV62 in size, also provides closes to shut off the fluid. (Figure 2) drip-free and consistent coating. SV62・SV62-B How the Valve Operates Input air pressure retracts the diaphragm seal, permitting fluid to flow. (Figure 1) Once the cycle is completed, the spring retracts the piston and the diaphragm closes to shut off the fluid. (Figure 2) Specifications Size φ18.9mm (Fluid body) x 63.2mm length Weight 85g Air cylinder body SUS303 Diaphragm UHMW* Valve head SUS303 Fluid outlet port M5×0.8 female Mounting hole M4 female Valve operating air pressure 0.4～0.62MPa Maximum fluid pressure 0.48MPa Figure 1 Figure 2 *Ultra High Molecular Weight Figure 1 Figure 2 18 19

Needle valves SV59MD Faster response speed enables clear cut-off of the fluid Consistent minimum volume dispensing for microdot application SV51 precision needle valve is designed to apply a small amount of low-viscosity fluids with accuracy and the unique packing structure of the valve contributes to superior durability. SV59MD microdot dispense valve, with excellent high-speed driven, can apply small to extremely minute dots combined with an optional high-speed solenoid valve, which ensures precise and drip-free operation. Specifications Specifications Size H79mm×φ27mm Size φ26.9mm (Fluid body）x 113mm length Weight 213g (except fluid inlet fitting part) Weight 312g (except fluid inlet fitting part) Air cylinder SUS303 Air cylinder body SUS303 Needle SUS303 Piston needle SUS303 Needle packing PTFE, FKM Needle packing SUS303, Teflon Fluid chamber SUS303, PTFE Fluid body SUS303 Syringe fitting SUS303, FKM、PP Tip adapter SUS303 Fluid inlet thread M5 Fluid outlet port 1/8NPT female Valve operating air inlet thread M6 Mounting hole M6 female Valve operating air pressure 0.4 ～ 0.62Mpa Valve operating air pressure 0.4～0.62MPa Maximum fluid pressure 0.7Mpa Maximum fluid pressure 2.0MPa Dispensing tip GP Needle tip 23G (ID:φ0.33mm)～ 33G(ID:φ0.11mm) How the Valve Operates How the Valve Operates Input air pressure retracts the piston needle from the hub of the dispensing tip, permitting fluid to flow. (Figure 1) Input air pressure retracts the piston needle from the needle seat, permitting fluid to flow. (Figure 1) Once the cycle is completed, the piston spring returns the piston needle back Once the cycle is completed, the piston spring returns the piston needle back to its position in the to its position in the dispensing tip to shut off the fluid. (Figure 2). dispensing tip to shut off the fluid. (Figure 2). Figure 1 Figure 2 Valve controller SVC720V Consistent, precise volume control for high precision dispensing valves Figure 1 Figure 2 ・Parameters can be fine-tuned by digital display Features ・Faster response time ・Stabilized by internal precision regulator　 SVC720V 20 21

Piston valves Reliable shut off enhances accuracy and consistency Fast and accurate filling process for low to for medium to thick fluids high viscosity fluids SV35DA precision piston valve is designed to apply uniform dots and stripes of medium SV35HF piston valve is designed to consistently dispense middle to high viscosity materials to thick fluids such as grease and silicone and a suck-back function prevents dripping. SV35DA by achieving a higher and smoother flow rate rather than SV35DA, featuring a fast, SV35DA features a unique UHMW polymer diaphragm sealing head that ensures longer, clean cut-off that prevents dripping and drooling and excels in precision filling applications. trouble-free operation. Specifications Specifications Size φ28.5mm (Fluid body) × 141.0mm length Size φ31.1mm (Fluid body) × 100.0mm length Weight 379g Weight 333g Air cylinder body SUS303 Air cylinder body SUS303 Diaphragm UHMW* Diaphragm UHMW* Sealing head SUS303、UHMW Sealing head SUS303、UHMW Fluid body SUS303 Fluid body SUS303 Tip adapter Polypropylene Fluid inlet port 1/4 NPT female Output thread 1/8 NPT female Fluid outlet port 1/4 NPT female Fluid outlet port 1/4 NPT female Mounting hole M8 female Mounting hole M8 female Valve operating air pressure 0.4～0.62MPa Valve operating air pressure 0.4～0.62MPa Maximum fluid pressure 0.7MPa Maximum fluid pressure 0.7MPa *Ultra High Molecular Weight *Ultra High Molecular Weight How the Valve Operates How the Valve Operates Input air pressure forces the sealing head to move down, permitting fluid to flow. Input air pressure forces the sealing head to move down, permitting fluid to flow. (Figure 1) (Figure 1) Once the cycle is completed, the spring retracts the piston and the sealing Once the cycle is completed, the spring retracts the piston and the sealing head head closes to shut off the fluid and pull back a slight amount of fluid to clearly closes to shut off the fluid and pull back a slight amount of fluid to clearly cut it cut it off. (Figure 2). off. (Figure 2) Figure 1 Figure 2 Figure 1 Figure 2 22 23

Spray valves SV92-FL SV59MS Achieve the Industry’s Narrowest Ensuring thin-film spraying as small as 2 μm Fine-Line Coating with a High-Performance Spray Valve SV59MS, precision micro spray valve, using a small gauge needle tip, enables The Fine line spray valve SV92-FL enables non-contact spray coating with a line width of less than 1.0 mm. fine spraying of low to medium viscosity fluid over a narrow area without This valve head unit is specially designed to deliver fine-line spraying even at low-speed dispensing, which has scattering. traditionally been difficult to achieve. Specifications Specifications Size H91mm×φ27mm Size 21× 57mm Length (excluding joint) Weight 280g（362g）※（）with solenoid valve Weight 150g Air cylinder SUS303 Air cylinder body SUS303/FKM Needle SUS303 Nozzle / air cap material SUS303/FKM Needle packing PTFE, FKM Fitting for liquid supply thread M5 female Fluid chamber SUS303, PTFE Air supply fitting for valve drive thread M3 female Syringe fitting SUS303, FKM、PP Atomizing air supply fitting thread M3 female Fluid inlet thread M5 Mounting holes 2-M3 Depth 6 Pitch 10mm Valve operating air inlet thread M6 Valve operating air pressure 0.4 ～ 0.62 MPa Valve operating air pressure 0.4 ～ 0.62Mpa Maximum nozzle air pressure 0.5 MPa Maximum fluid pressure 0.7Mpa Maximum liquid pressure 0.7 MPa Dispensing tip GP Needle tip 23G (ID:φ0.33mm)～ 33G(ID:φ0.11mm) Spray Coverage Area How the Valve Operates Distance from the nozzle tip Application area Circle to the workpiece surface A B Input air pressure retracts the piston needle from the hub of the dispensing tip, permitting fluid to flow. (Figure 1) 5mm 0.7mm Once the cycle is completed, the spring returns the piston needle back to its 7mm 1.0mm position in the dispensing tip to shut off the fluid. (Figure 2). 10mm 1.3mm A 15mm 2.5mm B How the Valve Operates When valve drive air is supplied, the piston needle retracts from the nozzle seat (3), and the liquid is discharged from the nozzle tip. (Figure1-2) At the same time, atomizing air flows into the air cap. (Figure 2) This atomizing air turns the liquid into a fine spray. The amount of spray is controlled by the nozzle discharge time, liquid pressure, and piston needle stroke. The spray range varies depending on the distance from the nozzle tip to the workpiece surface, atomizing air pressure, and liquid viscosity. Figure 1 Figure 2 Figure 1 Figure 2 Spray valve Controller SVC620S Spray valve Controller SVC620S SVC620S provides low volume, low pressure fine spray SVC620S provides low volume, low pressure fine spray coating driven by a solenoid and nozzle pressure. coating driven by a solenoid and nozzle pressure. ・Stackable exterior face ・Stackable exterior face ・ Nozzle air delay function for reliable shut off Features ・ Nozzle air delay function for reliable shut off ・ Teaching function allows for spray volume Features ・ Teaching function allows for spray volume adjustment adjustment SVC620S SVC620S 24 25

High viscosity spray valve SV01S SV01CS Precise coating for high viscosity Precise coating for high viscosity materials without over spraying materials without over spraying Precision coating spray valve, SV01S, can apply materials with viscosity as Precision coating spray valve, SV01CS, can apply materials with high as 30,000 mPa·s. SV01S is ideally designed for applications of silicon, UV viscosity as high as 10,000mPa(s). SV01CS is ideally designed for adhesive, or grease, which are likely causing splattering in dispensing. application of non-solvent moisture-proof coating materials. The unique Different type of nozzle and air can be used with the valve to optimize a spray design of the valve tip allows for accessibility and application around pattern. tight, high mounted components. Specifications Specifications Size φ26.9mm (Fluid body） x 105mm length size φ26.9 mm (fluid body) ×143 mm length Weight 312g weight 312g Air cylinder body SUS303 Air cylinder body SUS303 Piston needle SUS303 Piston needle SUS303 Needle packing SUS303、Teflon® Needle packing SUS303, Teflon® Fluid body SUS303 fluid chamber/ extension SUS303 Nozzle / air cap SUS303 Nozzle and air cap SUS303 Fluid inlet thread 1/8NPT female Fluid inlet thread 1/8NPT Female Valve operating air inlet thread M5×0.8 female Mounting hole M6 Female Nozzle air inlet thread M5×0.8 female Valve operating air pressure 0.4～0.62MPa Mounting M6×1 tap hole Maximum nozzle air pressure 0.4MPa Valve operating air pressure 0.4～0.62MPa Maximum fluid pressure 0.7MPa Maximum nozzle air pressure 0.5MPa Applicable nozzle (dedicated) #04　#07　#11 Maximum fluid pressure 0.7MPa Nozzle drying protection cap Supplied as standard * Fluid feeding part of stainless steel valve is passivation treated. SV01S conventional spray valve SV01CS conventional spray valve Nozzle and Cap selection based on coating width How the Valve Operates Nozzle and Cap selection based on coating width How the Valve Operates SV01S Input air pressure retracts the needle from the nozzle seat, SV01S （Spray valve） （Spray valve） At the same time as (Figure 1), the nozzle air flows around the SV01CS allowing fluid to flow. At the same time, nozzle air flows SV01CS air cap to atomize the fluid into fine droplets. (Figure 2) （Spray valve） around the nozzle and atomizes the fluid into fine droplets. （Spray valve） SV91CD SV91CD Once the cycle is completed, the spring returns the piston （Dot Line） (Figure 1)　Once the cycle is completed, the spring returns （Dot Line） SV59MS SV59MS needle back to its position to shut off the fluid. (Figure 3) （Micro spray valve） the piston needle back to its position to shut off the fluid. （Micro spray valve） SV51 SV51 （Needle Valve） (Figure 2) （Needle Valve） BEATRUM BEATRUM (Jet valve) (Jet valve) Large coating area Narrow Large coating area Narrow Spray valve Controller SVC620S Spray valve Controller SVC620S SVC620S provides low volume, low pressure fine spray SVC620S provides low volume, low pressure fine spray coating driven by a solenoid and nozzle pressure. coating driven by a solenoid and nozzle pressure. ・Stackable exterior face ・Stackable exterior face ・ Nozzle air delay function for reliable shut off ・ Nozzle air delay function for reliable shut off Figure 2 Figure 3 Features ・ Teaching function allows for spray volume Features ・ Teaching function allows for spray volume adjustment Figure 1 Figure 2 adjustment SVC620S SVC620S 26 27

Conformal coating valves Low volume, low pressure spray coatings enable Precision conformal coating dispensing high transfer efficiency moisture-proof material into thin film patterns SV70 conformal coating valve is designed to apply various patterns of SV91 spray valve is designed to provide consistent coating of low to medium viscosity fluids with low moisture-proof materials coating on PCBs with a lower flow rate. With an volume low pressure air without causing overspray or misting. innovatively designed square-cut nozzle, SV70 ensures superior stability With the selection of the most appropriate nozzle, the spray quality can be perfectly controlled. without overspray, as well as a faster and drip-free dispensing process. Specifications Size φ26.9mm (Fluid body) × 105mm length Weight 294g Air cylinder body SUS303 Piston needle SUS303 Needle packing SUS303, Teflon Fluid body SUS303 Nozzle air cap SUS303 Spray pattern Square-cut nozzle Fluid inlet port 1/8NPT female Mounting hole M6 female Valve operating air pressure 0.4～0.62MPa Maximum nozzle air pressure 0.2MPa (Standard) Specifications Maximum fluid pressure 2.0MPa Size φ26.9 (Fluid body) × 141.0mm Free flow orifice（special） #46、#28、#14 Weight 334g (except fluid inlet fitting part) Air cylinder body SUS303 Piston needle SUS303 Needle packing SUS303, Teflon Fluid body / Extension SUS303 Spray Coverage Area Tip adapter SUS303 Fluid outlet port 1/8NPT female Mounting hole M6 Round Pattern Spray Coverage（A） Valve operating air pressure 0.4～0.62MPa round Nozzle distance Nozzle size Valve operating air pressure 0.7MPa from surface　 #46 #28 #14 Free flow orifice（special） #9、#6、#4 25mm 6mm 5mm 4mm 50mm 1３mm 10mm 8mm 7５mm 19mm 15mm 12mm 150mm 36mm 30mm 24mm A How the Valve Operates Spray Coverage Area How the Valve Operates Input air pressure retracts the piston needle from the nozzle seat, allowing fluid to flow. (Figure 1) Fan Pattern Spray Coverage（B） Once the cycle is completed, the piston spring returns the Nozzle distance Nozzle size Input air pressure retracts the needle from the nozzle seat, piston needle back to its position to shut off the fluid. (Figure from surface　 Nozzle distance Nozzle size #9 #6 #4 fan allowing fluid to flow. At the same time, nozzle air flows from surface　 2). #46WF #46F #28F #14F 10mm 18mm 11mm 8mm 10mm around the nozzle and atomizes the fluid into fine droplets. 25mm 40mm 25mm 10mm 8mm (Figure 1) 50mm 60mm 40mm 20mm 16mm Once the cycle is completed, the spring returns the piston 7５mm 80mm 50mm 30mm 24mm needle back to its position to shut off the fluid. (Figure 2) 150mm 165mm 80mm 60mm 50mm B Valve controller SVC720F SVC720F directly controls SV70 with excellent high-speed response for maximium pneumatic solenoid Spray valve Controller SVC620S dispensing performance. SVC620S provides low volume, low pressure fine spray coating driven by a solenoid and nozzle pressure. ・Stackable squared design ・Stackable exterior face Features ・Fast response solenoid allows rapid ・ Nozzle air delay function for reliable shut off production time Features ・Stabilized by internal precision regulator Solenoid valve Solenoid valve ・ Teaching function allows for spray volume SVEM720 SVEM800 adjustment Figure 1 Figure 2 SVC720F Figure 1 Figure 2 SVC620S *Solenoid valve SVEM720 or SVEM800 should be used. 28 29

High pressure spool valve Valve controllers SV47 Standard Valve Controller Spray valve controller (specified for SV91, SV59MS) High pressure spool valve for applying a neat bead of sealant and grease SVC720V SVC620S SV47 is an air-operated, balanced spool valve for consistent dispensing of industrial sealants, silicones and greases at input pressures up to 17.2MPa. Specifications Consistent, precise volume control All digital display ensures versatility Size φ 38.1mm（Fluid body）X 135mm length for high precision dispensing valves and flexibility for precise spray control Weight 850g Fluid body and cap Stainless steel Air cylinder cap Stainless steel Air cylinder cap aluminium Spool shaft Stainless steel (hard chrome plate) Coating dot valve controller Conformal coating valve controller Upper ／ lower sealing and O-ring UHMW※, EPDM Fluid inlet port 3/8 NPT female (specified for SV91CD) (specified for SV70) Fluid outlet port 1/4 NPT female Air inlet port 1/4 NPT female Auxiliary air inlet port 1/8 NPT female SVC620CD SVC720F Oil inlet port 1/8 NPT female Air pressure required 0.48～ 0.62MPa Maximum fluid pressure 17.2MPa ※Ultra High Molecular Weight Solenoid valve Solenoid valve Solenoid valve Solenoid valve SVEM720 SVEM800 SVEM720 SVEM800 How the Valve Operates Non-contact dot, spray line Fast response pneumatic solenoid dispensing can be selected maximizes dispensing performance Input air pressure retracts the spool shaft, allowing fluid to flow. (Figure 1) *Solenoid valve SVEM720 or SVEM800 should be used. *Solenoid valve SVEM720 or SVEM800 should be used. Once the cycle is completed, the spring returns the spool shaft back to its original position to shut off the fluid. (Figure 2) Specifications SVC720V SVC620S SVC620CD SVC720F Power DC24V（VAC100-240 adapter） Power consumption 18W Air Input requirement 0.4MPa～0.7MPa Pressure setting range 0～0.50MPa ( Valve operating pressure : more than 0.40MPa ) Nozzle air pressure ー 0～0.50MPa ー setting range Time setting range 0.005～999.9sec Start input Footpedal, Band switch, signal for VDC5-24（I/O） I/O D-sub 9 pin connector Storage condition 5℃～40℃（ non-condensing） External dimensions ( ) including protruding portion W250×D139(177)×H76(78) W160×D139(176)×H76(78) Weight 1.5kg 1.4kg 0.8kg Accessories AC adapter　Foot pedal switch unit：mm Figure 1 Figure 2 30 31

5 Hiigh-speed Non-contact Jet Diispenser EXJET・EXJET-HS BEATRUM・BEATRUM-TH EXJET EXJET-HS -H BEATRUM is a fast and high precision jet EXJET is a next-generation piezo jet dispenser designed dispenser specifically for micro dispensing, to improve productivity in manufacturing. equipped with a heater as standard, applying viscous materials ranging from low to high Its advanced actuator technology enables precise consistently. dispensing of high-viscosity fluids, even in micro-scale areas. The laser-like fluid trajectory ensures stable, BETRUM-H is designed for precise jetting mid-to high-quality dispensing across a wide range of materials. high viscosity materials just by exchanging a tip. Interchangeable striker seat part enables to apply EXJET helps improve yield and reduce footprint in various fluids such as silicone. electronic assembly and precision manufacturing processes. Specifications Dispensing valve Dispensing controller model SJVH7000 SJVH7000-H SJVC7000 W 53mm 250mm Size H 95mm 113mm D 106mm 188mm Localized coating on a PCB Camera module encapsulation Die attach Weight 650g 1800g Speed Up to 250Hz Specifications Min. dispensed width φ0.3mm Power VDC24（AC100 ～ 240V adapter） Dispense Valve Dispense Controller Diagram Model SPJH1000 SPJH1000HS Model SPJC1000V Width 114.8mm Width Applications Overall 106mm Height Overall dimensions 84.6mm dimensions Height 128.4mm Underfill, dam & fill, moisture-proof coating material, UV adhesive, Depth 24mm Depth 231mm Weight 800g Weight 1300g grease, oil, silver paste, paint, ink, primer, solvent, etc. Maximu m 1,000Hz Maximum Heater Function Included Dispense Cycle 2,500Hz (Normal Operation: 500Hz) （Normal Operation:1,000Hz） Power Supply 24V DC (100-240V, Supported viscosity Maximum300,000ｍPa・ｓ ー AC adapter included) Heater Function Included Manual Switches Purge button, Shot button Wetted parts material SUS303/FKM/FFKM Mounting Tabletop or panel mount* Dispensing valve Fluid supply port thread M5 female *Rack mountable (3U x 21HP) Mounting hole thread 10mm pitch Maximum fluid pressure 0.7 MPa LED phosphor Acrylic two-component adhesive Grease Dispensing controller SJVC7000 Dimensions Dimensions Dispensing valve Dispensing valve Dispensing controller (φ20) (φ20) Dispensing controller φ5.9 φ4 pin hole for positioning 2×φ5.5 2 × M4, depth 4 mm φ4 pin hole for positioning 250 4 H8, depth 4 91.5 φ4 H8, depth 4 106 12 207.5 75 30 23 22.5 94.5 24 231 114.8 Tilt leg 37.5 Unit: mm Unit: mm 32 33 (62) 84.6 (500) 6 22.6 10 30 45 (3) 128.4 122.4 3.3 48.7 20 91 15 (113) 177.9 111 139 (10) （7.5°） (159)

6 IInlliine seriies AXSC500 AXSD500 AXSC500 AXSD500 Easy-to-Use Inline Coating Machine for Optimal Coating Advanced Inline Precision Dispensing System for Industrial Applications The AXSC500 is a coat ing machine designed for apply ing moisture-proof coating to substrates. It makes creating coating programs simple and easily while viewing the screen. The AXSD500 is an advanced inline dispensing system engineered for high-precision industrial production environments. It combines intuitive programming, real-time position compensation, and integrated quality verification to deliver consistent dispensing results while maximizing production efficiency. SKY Vision camera LED light & UV light for inspection Rotary & tilting tool Camera (OP) Automatic variable conveyor Laser sensor （OP） Valve Purge station Conveyor Stopper Specifications Purge Station Nozzle Detect Model AXSC500 Specifications Dimensions：L×W×H 838×1090×1610mm (excluding signal tower) Model AXSD500 Weight 360㎏　 Dimensions：L×W×H 840×1090×1610mm (excluding signal tower) Axes 3axes（X,Y,Z） Weight 360㎏　 Drive Servo motor Number of Axes 3 axes (X/Y/Z) Valve motion 90°rotary & left/right 45°tilting Axis Drive Servo motor Maximum valves 2 X/Y Movement Speed 1-500mm/sec Installed valves SV70, SV91CD, SV51, SV35DA, SV91, SV97MS Positioning Accuracy ±0.01mm Movement range (single-side valve) 450×500×100mm *Can be applied to M-size board X/Y/Z Range of Motion 450×500×100mm *Compatible with M-size substrates Coating area (XY) 370×400mm Coating Area 370×400mm Movement speed 1-500mm/sec Maximum Number of Valves 1 valve Repeatability ±0.01mm Compatible Valves SV70, SV01CS, SV51, SV35DA, SV91, SV97MS* Conveyor Electrically adjustable type (width 50-510mm) Conveyor Electric variable type (variable width 50-510mm) Conveying direction Left→Right Transfer Direction Left to right Pass line adjustment range 880～965mm Pass Line Adjustment Range 880-965mm (maximum 915-965mm) Work height (maximum) 100mm Work Height (Maximum) 100mm Light Inspection UV light & LED lighting Camera Functions Teaching function, position correction function, simple inspection function* Camera functions Teaching, position correction Height Detection Laser height sensor* Air specifications φ8 hose, 0.6Mpa (maximum input pressure) Air Specifications φ8 hose, 0.6Mpa (maximum input pressure) Power supply voltage AC200-240V (single phase) Power Supply AC200～240V (single phase) Power consumption 3.5A *Option 34 35

7 Preciisiion Automated Viisiion Diispensiing System AXE Series AXE Lineup Vision system AXE200 AXE300 AXE400 AXE600 200x200x75mm 300x300x150mm 400x400x150mm 600x500x150mm 505 605 All-in-one solution for critical dispensing needs 200 (X Max Stroke) 102.5 300 (X Max Stroke) 102.5 102.5 400 (X Max Stroke) 102.5 805 102.5 600 (X Max Stroke) 102.5 102.5 102.5 High precision automatic vision guided dispensing system AXA series, equipped with simple image processing features enables flexible and intuitive operation applied for various assembling processes that require high level of dispensing conditions. 405 56 93 207 93 56 51 103 97 103 51 56 93 307 93 56 56 93 507 93 56 Control box Control box (W56*D133*H352mm) (W56*D133*H352mm) Control box Control box (W56*D133*H352mm) (W56*D133*H352mm) Fluid Magic's advanced capabilities Flexible motion control helps to extend the functions towards versatile applications. ■ Block offset feature ■ Pre-dispense simulate path feature 51.5 Foot pad 302 51.5 56 52.5 Foot pad 400 52.5 56 152.5 Foot pad 500 152.5 56 Making global changes to batch or group of Provides user the ability to visually review dispensing programmed path 52.5 Foot pad 500 52.5 56 461 561 861 address in a program only by selecting and estimated cycle speed before running actual program. 661 two points in X, Y, and theta directions theoretical simulated corrected allows for faster programming. 200 (Y Stroke) 300 (Y Stroke) 400 (Y Stroke) 98.5 60 70 59 150 93.5 59 150 193.5 500 (Y Stroke) 59 150 193.5 programmed path simulate path Foot pad 300 29 Foot pad 410 29 Foot pad 510 29 Foot pad 510 32.5 ■ Encapsulation feature ■ Automatic array repeat feature 27.5 27.5 27.5 27.5 49 356.5 49 466.5 49 566.5 49 570 98 Few, easy steps allows users define area, shape and coverage Automatically duplicates a single dispensing dot or path points into multiple to be filled. within a grid pattern in X or Y direction. Program command enables easy adjustment to fine-tune dispensing parameters to be filled. Array X Specifications　AXE Vision System 10mm 10mm Item AXE200 AXE300 AXE400 AXE600 10mm 10mm Only single dot or path needs to be programmed. Number of Axis 3 Axis Array Y 10mm Operating Range X & Y Axis 200 / 200 300 / 300 400 / 400 600 / 500 Z Axis 75mm 150mm 10mm Maximum Portable Load X Axis (Tool) 3KG 5KG 10mm Y Axis (Workpiece) 10KG Maximum Speed (PTP Drive) X Axis 500 mm/sec 800 mm/sec 10mm Y Axis 500 mm/sec 800 mm/sec Z Axis 200 mm/sec 300 mm/sec Simple Vision teaching through ■ Image alignment feature Repeatability (Robot) X, Y, Z Axis ± 0.008mm searching & pointing Dual references for fiducial marks in X / Y align Data Storage PC storage entire part and adjust all dispense points in program Interpolation 3 axes (3D space) All steps of the programming process can be visually Languages English (Standard), Japanese, Chinese steered for precise calibration and offsets. Drive Movement PTP & CP A External Input/Output I/O 32 inputs / 32 outputs B Tip Detection System(Optional) Touch Detection Sensor Vision(Optional) Camera USB‒standard vision / CCD‒High-precesion Lens Lighting Standard with vision system ■ Image correction feature Power Supply Auto-switching AC100-240V 50/60Hz Angle correction allows identification of part orientation Operating Temperature 10 ～ 40℃ and changes programing from original for seamless Environment Relative Humidity 20 ～ 90% (non condensing) uninterrupted dispensing Liner Guide Single LM Guide Drive Method ①Set the angle of the mark. ②Set the dual reference of fiducial points XY Axis / 3-Phase Micro Stepping Motor / Synchronous belt Z Axis / 3-Phase Micro Stepping Motor / Precision Ball Screw A e A e B 36 37 600 179 150 271 409 (Open Height) 284 125 ARM 320 113.5 140.5 600 75 (Z Stroke) 459.5 49 365 414 703 514 177 192 334 389 125 (Open Height) ARM 370 113.5 193.5 703 150 (Z Stroke) 49 470 509.5 519 703 614 177 192 334 489 125 (Open Height) ARM 370 113.5 193.5 703 150 (Z Stroke) 49 570 509.5 619 823 712 177 312 334 (Open Height) 489 125 98 ARM 490 113.5 193.5 823 150 (Z Stroke) 717 629.5

AXE Series AXG Series Gantry Robot AXE Standard system AXG Series Direct Teaching Capability as Standard Inline Power, Heavy-Duty Precision: AXG Series Gantry Robot The AXE series desktop robot enables direct teaching programming using an intuitive pendant while visually confirming the workpiece. Offline editing is also possible via dedicated PC software. This direct teaching Seamlessly integrating into production lines, the AXG Series excels at challenging tasks and large workpieces. With capability combined with flexible editing ensures accurate, efficient adaptable placement and high payload options, it's your solution for effortless heavy object handling and large tool dispensing across manufacturing. integration. ■ System Configuration AXG400 AXG600 AXG0812 ■ Option 65.5 202 108 108 60 42.5 1219.5 CCD Front Camera / Needle Adjuster / Pillar Unit 117.5 226.75 85.5 514.5 85.5 189.75 1419.5 * Custom options are available. 117.5 226.75 85.5 714.5 85.5 189.75 AXE200 AXE300 AXE400 AXE600 (200×200×75mm) (300×300×150mm) (400×400×150mm) (600×500×150mm) 20 Foot Pad 762.5 37.5 137 130 842.5 85 137 130 1042.5 85 820 760 341 400(Y Max Stroke) 19 233.5 166.5 600 (Y Max Stroke) 233.5 166.5 1200 (Y Max Stroke) 90 1350 68 43.5 Specifications AXE Series 48.5 1600 90 750 68 43.5 22.5 Foot Pad 327.5 Foot Pad 327.5 22.5 48.5 1000 60 700 Item / Model AXE200 AXE300 AXE400 AXE600 Number of axes 3 axes Specifications AXG Series Working Range X/Y-axes 200 / 200 300/300 400/ 400 600 / 500 Z-axis 75mm 150mm 150mm 150mm Item / Model AXG400 AXG600 AXG0812 Max. Payload X-axis (Tool) 3KG 5KG 5KG 5KG Number of axes 3 Y-axis (Work) 10KG 10KG 10KG 10KG Maximum working area (X / Y / Z) 400 × 400 × 100 mm 600 × 600 × 150mm 800 × 1200 × 150mm X-axis 500mm/sec 800mm/sec 800mm/sec 800mm/sec Tool payload 5kg 20kg Max. Speed (PTP) Y-axis 500mm/sec 800mm/sec 800mm/sec 800mm/sec Weight 73kg 110.5kg 162kg Z-axis 200mm/sec 300mm/sec 300mm/sec 300mm/sec Dimensions 1007.5 x 760 x 710.5mm 1219.5 x 956.5 x 682mm 1419.5 x 1564 x 682mm Repeatability X/Y-axes ± 0.008mm ± 0.008mm ± 0.008mm ± 0.008mm Maximum speed (XY / Z) 500 / 300 mm/sec 800 / 200 mm/sec Z-axis ± 0.008mm ± 0.008mm ± 0.008mm ± 0.008mm Drive system 5-Phase Micro Stepping Motor　　　 XY Axis: Stepping Motor Drive System XY-axes Z Axis: Stepping Motor (Brake Type ) Stepping Motor Z-axis Memory capacity PC storage Memory Capacity 1-999 programs, 1-1000 points General purpose I/O 32 inputs / 32 outputs Data Storage SD Card/SVC Port Input AC (to power supply) AC 100-240V AC100-115V, AC200-230V (2 models available) Interpolation 3-axis (3D space) Repeatability* ±0.02 mm/axis ±0.05 mm/axis Control Motion PTP＆CP Vision CCD camera (optional) External I/O I/O 32 inputs/32 outputs DispenseMotion software Fluid Magic Nozzle Detection Optional (Optical) Tip detection Tip detector (optional) Power Supply AC100-240V 50/60Hz Teaching pendant (optional) Operating Environment Temperature 10～40℃ Height detection Laser (optional) 38 39 558.5 558.5 169.5 69.5 319.5 177 16 ARM 100 68 100(Z Max Stroke) 341 13 16 179 503 150(Z Stroke) 195 132.5 16 13 ARM 150 91 412 237 73.5 184 179 503 179 503 16 13 ARM 150 91 412 150( Z Stroke) 195 132.5 237 73.5 184 179 503

9 Tube-type / Cartriidge Materiiall Diispenser AUTOTUBE 11 Diigiitall Tubiing Diispenser SRD150 Unique rotary mechanism applies a minute amount of instantaneous material AUTOTUBE system allows users to directly dispense a tube or SRD150 is designed to apply various materials such as instant adhesives a cartridge-type material like a silicon adhesive using a special (cyanoacrylates), thread-locking fluids, anaerobic adhesives, solvents or container with air pressure instead of refilling it to other medical fluids with rotary (peristaltic) movement instead of using containers. The material can be dispensed without causing air pneumatic pressure and generates few air bubbles in the fluid, which is bubbles and an operator can handle the operation without ideal for applications including consistent fluid dispensing, transferring hand fatigue. and filling. ・Reduces stress on fluid feed tubes extending tube life Specifications ・ Less heat transfer because of ATD200CW-B ATD300CB-B the rotary mechanical part Rotary (peristaltic) movement out in Reduces the degradation of the fluid due to heat Dispensing controller SDP400 AC adapter SD314 Foot pedal switch FTSW001 (2.4m code) PTFE tubing chart Silicon tubing chart Tubing specification Taper tip (5 types for each size x 10 )　Retaining cap (10) Consumable parts Big taper tip： 880012A(２)*１ Size　material: PTFE/ length: 10m (394″) Size　length: 10m (394″) PTFE suited for cyanoacrylate or anaerobic adhesive IDmm ODmm Thickness mm IDmm ODmm Thickness mm Silicon more fluid flow can be obtained than Reservoir set 100/200g Tube holder： SAR20RAT 330g Outer reservoir set： 580091 AWG-11 2.41 (.095″) 3.01 (.119″) 0.30 (.012″) silicon Teflon tube 100/200g Retaining cap： SAR20RC (with end cap and air hose) 3×5 mm 3.0 (0.12″) 5.0 (0.20″) 1.0 (0.04″) AWG-13 1.93 (.076″) 2.53 (.100″) 0.30 (.012″) Air hose： SAR59 silicon AWG-16 1.35 (.053″) 1.95 (.077″) 0.30 (.012″) 2×4 mm 2.0 (0.08″) 4.0 (0.16″) 1.0 (0.04″) AWG-19* 0.96 (.038″) 1.56 (.061″) 0.30 (.012″) Tip adapter 7514-2・ Tip adapter for big taper tip： 7514-2PA*２ silicon 1.0 (0.04″) 3.0 (0.12″) 1.0 (0.04″) AWG-24 0.56 (.022″) 1.06 (.042″) 0.25 (.009″) 1×3 mm Adapter*３ 880001A・ 880001B ( for each size x 2 ) 880003A・ 880003B AWG-26 0.46 (.018″) 0.92 (.036″) 0.23(.009″) Please contact us if you use a size different from above. AWG-28 0.38 (.015″) 0.84 (.033″) 0.23 (.009″) *Both 1 and 2 are included only in ATD300CB, ATD300CPB-S　*3 : Please contact us about different thread sizes for tube materials and adaptors from fluid material manufacturers. *The above specifications may change lot by lot. *AWG-19 is used as a standard. Please contact us if you use other than AWG-19. Specifications ■ ATD300CV-DAB　 ■ SF60 Adapter for fluid filling Power supply DC12V（100AC-240V adapter included） 　 AUTOTUBE set with dispensing valve This adapter allows for easily Power consumption Approximately 7W Combination with a dispensing valve provides transferring the material inside Rotating speed (maximum) 120 RPM is adjustable with dial better consistency and accuracy in fluid dispensing the reservoir into a separate for an automation process. syringe. Dispensing timer 0.1-9.9sec Applicable viscosity*1 PTFE tube 1 ～ 2,000mPa.s Silicon tube 1 ～ 5,000mPa.s Dispensed volume*2 PTFE AWG-13 2.9ml/min Silicon 3×5 mm【 ID×OD】 19.5ml/min (with purified water) PTFE AWG-16 1.7ml/min Silicon 2×4 mm【 ID×OD】 12.5ml/min PTFE AWG-19*3 0.9ml/min Silicon 1×3 mm【 ID×OD】 4.5ml/min Outer dimensions ( ) including protrusions portion W78 (108) × D130 (166.5) × H129mm Weight Approximately1.8kg ・ Pen type dispenser with finger switch(SRD-P-0019)　*for AWG-19 (standard) Option ・ Foot switch（ SRD-FS） ・ PTFE tubes (10M per each) ・ Silicon tubes (10M per each) *1 : Figures are noted for reference. Please note that figures may not be used depending on the property or the conditions of the fluid. *2 : Figures are reference values at the time when the deposits become consistent after the setting rotation speed at 120RPM with a new tube attached. Please note that the deposit volume may change Valve Controller SVC720V Table-top robot SR Series depending on the conditions such as ambient temperature, water temperature, and length of the tubing. *3 : AWG-19 is generally used for the unit unless there are particular instructions. 40 41