Signet 0486 Profibus Concentrator - Increase your flexibility

GF Piping Systems Increase your flexibility Signet 0486 Profibus Concentrator

Communications made easy PROFIBUS in a nutshell ...is the world’s most successful fi eldbus with 50.9 million devices installed by the end of 2014 with over 9 million of these in the process industries. The reliable and simplifi ed communication protocol for your industrial applications. The Signet 0486 Profi bus Concentrator allows for Integrates up to six simplifi ed connection of Signet sensors to a PROFIBUS network. The 0486 supports six sensor interfaces and sensors to one a 4 to 20 mA current loop proportional valve interface. PROFIBUS address The 0486 supports PROFIBUS DP V1 and is available with either DB9 or M12 network connectors. PROFIBUS integration Ask us about other communications needs. – PROFINET adapted to your needs. – ETHERNET/IP Using the PROFIBUS protocol, devices from di erent manufacturers exchange information on the same communications bus without the need for special interface equipment. 2

Multiple channels in a single device By using a single PROFIBUS cable, other wiring is reduced signifi cantly, and overall installation costs are dramatically reduced. • Six Signet sensor interfaces (S3L) • Sensor interface supports Signet 8058 iGo devices • Sensor interface supports all Signet (S3L) sensors – Single 4 to 20 mA inputs • Four shared frequency inputs for fl ow measurements (maximum of six, 4 to 20 mA inputs) – 515, 525, 2536, 2540 and other frequency • One dedicated current loop I/O for valve positioning fl ow devices control or other loop uses • Two shared 4 to 20 mA current loop inputs for other – 4 to 20 mA output instruments – 4 to 20 mA input • Sensor interfaces supports Signet 8059 – Four dry-contact SPDT relays in a single device (maximum of 24 relays) – Actu ated Va w lvelo s - D l – F is e sv ol 3 peraturem – Pe rT e ssur tiv ity e – sis Le s Cy ondu Re la ctivit 0 – y/R 2 e - pH/ORP –n Salin xyg e ity – O 4 ed to v

Simplicity • Easy assembly • Proper and faster installation • Less cabinet space needed • Fast troubleshooting and easier maintenance • Less engineering costs to integrate sensors and automation products into Fieldbus • Reduces PROFIBUS integration cost per installation • Full digital access to GF sensor analytics and diagnostics Programming Setting-up process control has been dramatically improved using real engineering units and not bits or mA values. By using GF sensors and valves, control logic can be programmed in real process variables. Improved GSD Instruction The GSD is loaded into the PLC software programming environment, which allows the programmer to confi gure the Concentrator with sensors and devices specifi c for their application. All programming and confi guration data is stored in the PLC/Automation software. Reducing confi guration and set up errors while simplifying documentation and version management. Installation and Maintenance LED lights indicate the confi guration of each channel and operation readiness simplifying fi eld troubleshooting. LED Description S3L Not Configured Green Configured and Working Green Flash Configured and Sensor Error Red Configured and Wrong Device Red Flash Configured and No Device 4

The Profi bus Concentrator o ers automation professionals a new solution for process control. Features → Advantages → Benefi ts Six Signet (S3L) Channels and Conserves Profi bus Addresses by combining Lowers cost of installation of One Current Loop I/O Channel. connections and confi guration in a single device. multiple sensors and valves. • Four (S3L) Channels support frequency Mix and Match sensor technology, (S3L), Interface multiple types of input for low cost fl ow devices. Frequency, and or current loop, to match your sensors in a single device, application. (S3L), frequency, and or current • Two (S3L) Channels support current loop. loop inputs. Access to multiple measurements from a Reduces the number of single sensors. physical sensors required in Access to measurement and diagnostic many applications. data stored in GF Signet sensors. Status message ensure correct operation of the sensors. Increases reliability of automation systems. Control and sensing in a single unit on a Sense and control in single Control external devices with internal single Profi bus address. device. current loop I/O or compatible GF Signet external 4 channel Fail safe operation sets outputs to safe value in Protection from communication Relay Module. case of communication failure. failures. All confi guration is created in your automation Confi guration is contained software package (PLC/PAC). in your automation software package. Fully programmed over Simplifi es software development, Profi bus network. documentation and confi guration. Eliminates documentation of manual confi guration and Reduces errors. programing of multiple devices. Each channel’s confi guration and status is Simple LED indicators for on-site shown by LEDs to simplify installation and Eases troubleshooting and troubleshooting and verifi cation. troubleshooting. confi guration of fi eld units. GSD sensor setup using engineering units and Reduced errors pull down menus reducing time, and errors in Sensor specifi c GSD features. confi guring the Profi bus Concentrator for your Ease of programming and specifi c applications. confi guration. 5

Common Process Applications Tying the di erent measurement sensors and valves back to the primary control system can be greatly simplifi ed through the use of the GF Profi bus Concentrator, reducing costs, maintenance and engineering time. Examples are highlighted below. Reverse Osmosis Cooling Towers Reverse osmosis is a physical process for purifi cation of Cooling towers and heat recovery systems are a key water. Some key challenges users may face, are element for the energy balance of all cooling systems. maintaining unit performance to design parameters and Typical instrumentation for this process operation maximizing service life. Typical instrumentation include includes pH, conductivity, and with additional fl ow and chlorine measurement to protect the membrane, pH, valve control to monitor unit performance. Flow and conductivity to monitor the process. • Detect Chlorine in infl uent • Monitor and control system conductivity levels • Monitor and control pH • Monitor make up and bleed o volumes • Monitor fl ow • Monitor and control pH levels • Monitor infl uent, product and reject conductivities • Monitor and control biocide levels Profibus USB Out Chan Inn V ea ll v 7e S3L Addr Ch Lo ess an o n pel 6 S3L Ch La on o S n p ig eln 5et 3 P -o 0w 48e 624 r P VD r C of0 i.4 b0A u M sa x Concentrato C rha S3 nL nel 1Freq Cha S3 nL nel 2Freq Cha S3 nnL el 3Freq Cha S3 nL nel 4Freq Profibus USB Out Chan Inn V ea ll v 7e S3L Ad Cd h Loop re as ns nel 6 S3L Ch La on on pSi eg ln 5et 3 P -o 0w 48e 624 r PVD ro f0 i.4 C b0A u M sa x Concentrato C rha S3 nL nel 1Freq Cha S3 nL nel 2Freq Cha S3 nnL el 3Freq Cha S3 nL nel 4Freq RO (Infl uent: Flow, Number of Number of # of Wires Cooling Tower Number of Number of # of Wires Conductivity, pH, ORP. Transmitters Readings or Cables (pH, ORP, Conductivity, Transmitters Readings or Cables to Product: Flow, and to Make Up Flow, and Automation Conductivity, pH. Reject: Statuses Automation Blow Down Flow) Statuses System Flow, Conductivity) System Single Channel 9 18 18 Single Channel Transmitter 5 12 10Transmitter Multichannel (4) 3 18 18 Multi-Channel (4) Transmitter 2 12 10Transmitter Profi bus Concentrator 2 73 1 Profi bus Concentrator 1 39 1 6 L IN+ L IN- L IN+ +5V OUT L IN- DATA GN +D 5V OUG TND DAT DA ATA GND Freq GIN ND DATA +5V OUT Freq IN L IN+ +5V OUT L IN- L IN+ +5V OUT L IN- DATA GND +5V OU G TND DATA GND Freq IN DATA DATA +5V OUT GND Freq IN +5V OUT L IN+ L IN- GND L IN+N/C DATA L IN-L OUT+ GND L O FrU eT q IN N/C - L OU DT A+ TA N +/ 5C V OUT L O FrU eT q- IN N +/ 5C V OUT GND DATA GND Freq IN DATA +5V OUT Freq IN +5V OUT PWR- PWR- PWR- PWR- PWR- PWR+ PWR- PWR+ PWR+ PWR+ PWR+ PWR+

Fume/Gas Scrubbing Exhaust gases must be cleaned before being released into the atmosphere. As the contaminated gas fl ows into the washer, the harmful substances are washed out on spraying levels so that the clean gas rises and can be emitted. Typical instrumentation include, pH, fl ow, level and pressure. • Monitor and control of wet scrubber pH • Monitor pump fl ow rates Solution of applications • Monitor sump liquid levels • Monitor pump pressure • Measure blow down – Automation Upgrades – Filter and RO Skids – Neutralization Systems – Cooling Tower Automation – Water and Wastewater Treatment – Boiler Feed Water and Condensate Monitoring Fume Scrubber Number of Number of # of Wires (Recirculation: Pump Transmitters Readings or Cables to Flow, Pump Pressure. and Automation Sump: pH, Liquid Level, Statuses System Conductivity. Blow Down Flow and Total) Single Channel 6 12 12 Transmitter Multichannel (4) 2 12 12 Transmitter Profi bus Concentrator 1 43 1 7

GF Piping Systems Worldwide at home Our sales companies and representatives ensure local customer support in over 100 countries. www.gfsignet.com Argentina / Southern South America France Middle East Singapore Georg Fischer Central Plastics Georg Fischer SAS Georg Fischer George Fischer Pte Ltd Sudamérica S.R.L. 95932 Roissy Charles de Gaulle Cedex Piping Systems (Switzerland) Ltd 11 Tampines Street 92, #04-01/07 Buenos Aires, Argentina Phone +33 (0) 1 41 84 68 84 Dubai, United Arab Emirates 528 872 Singapore Phone +54 11 4512 02 90 fr.ps@georgfischer.com Phone +971 4 289 49 60 Phone +65 6747 0611 gfcentral.ps.ar@georgfischer.com www.gfps.com/fr gcc.ps@georgfischer.com Fax +65 6747 0577 www.gfps.com/ar www.gfps.com/int sgp.ps@georgfischer.com Germany www.gfps.com/sg Australia Georg Fischer GmbH Netherlands Spain / Portugal George Fischer Pty Ltd 73095 Albershausen Georg Fischer N.V. Georg Fischer S.A. Riverwood NSW 2210 Australia Phone +49 (0) 7161 302-0 8161 PA Epe 28046 Madrid Phone +61 (0) 2 9502 8000 info.de.ps@georgfischer.com Phone +31 (0) 578 678 222 Phone +34 (0) 91 781 98 90 australia.ps@georgfischer.com www.gfps.com/de nl.ps@georgfischer.com es.ps@georgfischer.com www.gfps.com/au www.gfps.com/nl www.gfps.com/es India Austria Georg Fischer Piping Systems Ltd New Zealand Sweden Georg Fischer 400 076 Mumbai Georg Fischer Ltd Georg Fischer AB Rohrleitungssysteme GmbH Phone +91 224007 2001 13 Jupiter Grove, Upper Hutt 5018 117 43 Stockholm 3130 Herzogenburg branchoffice@georgfischer.com PO Box 40399, Upper Hutt 5140 Phone +46 (0) 8 506 775 00 Phone +43 (0) 2782 856 43-0 www.gfps.com/in Phone +64 (0) 4 527 9813 info.se.ps@georgfischer.com austria.ps@georgfischer.com nz.ps@georgfischer.com www.gfps.com/se www.gfps.com/at Indonesia www.gfps.com/nz George Fischer Pte Ltd – Switzerland Belgium / Luxembourg Representative Office Norway Georg Fischer Georg Fischer NV/SA Phone +62 21 2900 8564 Georg Fischer AS Rohrleitungssysteme (Schweiz) AG 1070 Bruxelles/Brüssel Fax +62 21 2900 8566 1351 Rud 8201 Schaffhausen Phone +32 (0) 2 556 40 20 sgp.ps@georgfischer.com Phone +47 67 18 29 00 Phone +41 (0) 52 631 30 26 be.ps@georgfischer.com www.gfps.com/sg no.ps@georgfischer.com ch.ps@georgfischer.com www.gfps.com/be www.gfps.com/no www.gfps.com/ch Italy Brazil Georg Fischer S.p.A. Philippines Taiwan Georg Fischer Sist. de Tub. Ltda. 20063 Cernusco S/N (MI) George Fischer Pte Ltd Georg Fischer Co., Ltd 04795-100 São Paulo Phone +39 02 921 861 Representative Office San Chung Dist., New Taipei City Phone +55 (0) 11 5525 1311 it.ps@georgfischer.com Phone +632 571 2365 Phone +886 2 8512 2822 br.ps@georgfischer.com www.gfps.com/it Fax +632 571 2368 Fax +886 2 8512 2823 www.gfps.com/br sgp.ps@georgfischer.com www.gfps.com/tw Japan www.gfps.com/sg Canada Georg Fischer Ltd United Kingdom / Ireland Georg Fischer Piping Systems Ltd 556-0011 Osaka, Poland George Fischer Sales Limited Mississauga, ON L5T 2B2 Phone +81 (0) 6 6635 2691 Georg Fischer Sp. z o.o. Coventry, CV2 2ST Phone +1 (905) 670 8005 jp.ps@georgfischer.com 05-090 Sekocin Nowy Phone +44 (0) 2476 535 535 Fax +1 (905) 670 8513 www.gfps.com/jp Phone +48 (0) 22 31 31 0 50 uk.ps@georgfischer.com ca.ps@georgfischer.com poland.ps@georgfischer.com www.gfps.com/uk www.gfps.com/ca Korea www.gfps.com/pl Georg Fischer Piping Systems USA / Caribbean China 271-3 Seohyeon-dong Bundang-gu Romania Georg Fischer LLC Georg Fischer Piping Systems Ltd Seongnam-si, Gyeonggi-do Georg Fischer Irvine, CA 92618-1904 Shanghai 201319 Seoul 463-824 Piping Systems (Switzerland) Ltd Phone +1 (714) 731 88 00 Phone +86 21 3899 3899 Phone +82 31 8017 1450 020257 Bucharest - Sector 2 Toll Free 800 854 40 90 china.ps@georgfischer.com Fax +82 31 8017 1454 Phone +40 (0) 21 230 53 80 us.ps@georgfischer.com www.gfps.com/cn kor.ps@georgfischer.com ro.ps@georgfischer.com www.gfpiping.com www.gfps.com/kr www.gfps.com/int Denmark / Iceland International Georg Fischer A/S Malaysia Russia Georg Fischer 2630 Taastrup George Fischer (M) Sdn. Bhd. Georg Fischer Piping Systems (Switzerland) Ltd Phone +45 (0) 70 22 19 75 40460 Shah Alam, Selangor Darul Ehsan Piping Systems (Switzerland) Ltd 8201 Schaffhausen/Switzerland info.dk.ps@georgfischer.com Phone +60 (0) 3 5122 5585 Moscow 125047 Phone +41 (0) 52 631 30 03 www.gfps.com/dk Fax +603 5122 5575 Phone +7 495 258 60 80 Fax +41 (0) 52 631 28 93 my.ps@georgfischer.com ru.ps@georgfischer.com info.export@georgfischer.com Finland www.gfps.com/my www.gfps.com/ru www.gfps.com/int Georg Fischer AB 01510 VANTAA Mexico / Northern Latin America Phone +358 (0) 9 586 58 25 Georg Fischer S.A. de C.V. Fax +358 (0) 9 586 58 29 Apodaca, Nuevo Leon info.fi.ps@georgfischer.com CP66636 Mexico www.gfps.com/fi Phone +52 (81) 1340 8586 Fax +52 (81) 1522 8906 mx.ps@georgfischer.com www.gfps.com/mx The technical data is not binding. They neither constitute expressly warranted characteristics nor guaranteed properties nor a guaranteed durability. They are subject to modification. Our General Terms of Sale apply. 3-0000.730 (A-03/16) ©2015 Georg Fischer Signet LLC 3401 Aero Jet Avenue, El Monte CA 91731-2882 Tel (626) 571-2770, Fax (626) 573-2057