力英電子製 AC/DC スイッチング電源 （オープンフレーム タイプ）
力英電子は、1986 年に台湾で設立した歴史のある会社で、
主な製品としてパワーインダクタ，高周波電源トランス，ACアダプターを製造しているメーカーです。
力英電子股份有限公司
Li tone Taiwan Electronics co. Ltd
力英電子について、ご質問等がございましたら、
「aperza@tobe.jp」へメールにてお問い合わせください。
LTE45FM Series 2" x 3" P.1-2 (P.2-3)
LTE45FM-S2
LTE45FM-S3
LTE45FM-S4
LTE45FM-S6
LTE45FM-S5
LTE45FM-S7
LTE45FR Series 2" x 4" P.3-4 (P.4-5)
LTE45FR-S2
LTE45FR-S3
LTE45FR-S4
LTE45FR-S6
LTE45FR-S5
LTE45FR-S7
LTE45FS Series 2" x 4" P.5-6 (P.6-7)
LTE45FS-S0
LTE45FS-S1
LTE45FS-SY
LTE45FS-S2
LTE45FS-S3
LTE45FS-S4
LTE45FS-SR
LTE45FS-S6
LTE45FS-S5
LTE45FS-S7
LTE60FM Series 2" x 3" P.7-8 (P.8-9)
LTE60FM-S2
LTE60FM-S3
LTE60FM-S4
LTE60FM-S6
LTE60FM-S5
LTE60FM-S7
LTE60FR Series 2" x 3" P.9-10 (P.10-11)
LTE60FR-S2
LTE60FR-S3
LTE60FR-S4
LTE60FR-S6
LTE60FR-S5
LTE60FR-S7
LTE60FS Series 2" x 4" P.11-12 (P.12-13)
LTE60FS-S0
LTE60FS-S1
LTE60FS-S1-1
LTE60FS-S2
LTE60FS-S3
LTE60FS-S4
LTE60FS-S4-1
LTE60FS-S6
LTE60FS-S5
LTE100F Series 2" x 4" P.13-14 (P.14-15)
LTE100F-S2
LTE100F-SW
LTE100F-S4
LTE100F-S6
LTE100F-S5
LTE120FM Series 2" x 3" P.15-16 (P.16-17)
LTE120FM-S2
LTE120FM-S3
LTE120FM-S4
LTE120FM-SR
LTE120FM-S5
LTE120FM-S7
LTE120FS Series 3" x 5" P.17-18 (P.18-19)
LTE120FS-S2
LTE120FS-S3
LTE120FS-SW
LTE120FS-S4
LTE120FS-SR
LTE120FS-S6
LTE120FS-S5
LTE150F Series 3" x 5" P.19-20 (P.20-21)
LTE150F-S2
LTE150F-S3
LTE150F-SW
LTE150F-S4
LTE150F-SR
LTE150F-S5
LTE150F-S7
LTE200FS Series 3" x 5" P.21-22 (P.22-23)
LTE200FS-S2
LTE200FS-S4
LTE200FS-S5
LTE200FS-S7
LTE300FS Series 3" x 5" P.23-25 (P.24-26)
LTE300FS-S2(V1)
LTE300FS-S4(V1)
LTE300FS-SR(V1)
LTE300FS-S5(V1)
LTE300FS-S7(V1)
LTE460F Series P.26-27 (P.27-28)
LTE460F-D27
このカタログについて
| ドキュメント名 | 力英電子 AC/DC SWITCHING POWER SUPPLY (Open Frame type) |
|---|---|
| ドキュメント種別 | 製品カタログ |
| ファイルサイズ | 6.4Mb |
| 登録カテゴリ | |
| 取り扱い企業 | トベ電機株式会社 (この企業の取り扱いカタログ一覧) |
この企業の関連カタログ
このカタログの内容
Page1
AC/DC SWITCHING
POWER SUPPLY
Open Frame
Li Tone Electronics Co Ltd
Page2
Open Frame Switching mode Power Supply
Main Feat ures
2”x3” open fra e co pact size Standard version
Convection cooling design
c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 1.5Arms；@230Vac 0.75Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 80 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R egulation (PARD)
MIN. Regulation (%) *1 (Vdc) (Convection) (%) (mVp-p) *2
LTE45FM-S2 +12V 0A 3.8A ± 0.5% 11.64~12.36Vdc (±3%) 120mVp-p
LTE45FM-S3 +15V 0A 3.0A ± 0.5% 14.55~15.45Vdc (±3%) 150mVp-p
LTE45FM-S4 +24V 0A 1.9A ± 0.5% 23.28~24.72Vdc (±3%) 240mVp-p
LTE45FM-S6 +36V 0A 1.25A ± 0.5% 34.92~37.08Vdc (±3%) 360mVp-p
LTE45FM-S5 +48V 0A 0.94A ± 0.5% 46.56~49.44Vdc (±3%) 480mVp-p
LTE45FM-S7 +56V 0A 0.8A ± 0.5% 54.32~57.68Vdc (±3%) 560mVp-p
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2. Peak-to-peak for 45W (convection rating) @115Vac MIN. ; Measurements with a 20MHz bandwidth and terminated with a 10uF
electrolytic Cap. In parallel with a 0.1uF ceramic Cap.
Environm ent Specification: General Specification:
Operation Temperature: 0-50℃ Turn-on Time (full load @115Vac): < 3 Sec
Storage Temperature: -40 to 85℃ Hold-up Time (full load@115Vac):>15m Sec
Storage Humidity: 5% to 95% RH Safety Ground leakage Current (Class I type @230Vac 50Hz): < 3.5mA
1
Page3
Input Specification: Protection Specification:
Input Volta ge: 90 – 264 Vac Blown-Out Protection: N/A
Frequency: 50/60 Hz Over Voltage Protection: Latch off (140%±30%)
Input Current: Over Load Protection: Hiccup/Auto-Recovery
@115Vac 1.5Arms；@230Vac 0.75Arms (Over current range@110%~200% above rating Load)
Inrush Current: Short Circuit Protection: Hiccup/Auto-Recovery
TCeocldh Sntairct @al1 1s5pVaec,c aitf 2i5c℃at i<o 40n A:p -p
Cold Start @ 230Vac, at 25℃ < 80 Ap-p
Mechanical Specifications:
2
Page4
Open Frame Switching mode Power Supply
Main Feat ures
2”x4” open fra e co pact size Surge 6kV version
Convection cooling design
Output Pow er up to 45W
c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 0.95Arms；@230Vac 0.6Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 80 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R e gulation (PARD)
MIN. Regulation (%)*1 (Vdc) (Convection) (%) (mVp-p) *2
LTE45FR-S2 +12V 0A 3.8A ± 0.5% 11.64~12.36Vdc (±3%) < 120mVp-p
LTE45FR-S 3 +15V 0A 3.0A ± 0.5% 14.55~15.45Vdc (±3%) < 150mVp-p
LTE45FR-S4 +24V 0A 1.9A ± 0.5% 23.28~24.72Vdc (±3%) < 240mVp-p
LTE45FR-S6 +36V 0A 1.25A ± 0.5% 34.92~37.08Vdc (±3%) < 360mVp-p
LTE45FR-S5 +48V 0A 0.94A ± 0.5% 46.56~49.44Vdc (±3%) < 480mVp-p
LTE45FR-S7 +56V 0A 0.8A ± 0.5% 54.32~57.68Vdc (±3%) < 560mVp-p
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2. Peak-to-peak for 45W (convection rating) @115Vac MIN. ; Measurements with a 20MHz bandwidth and terminated with a 10uF
electrolytic Cap. In parallel with a 0.1uF ceramic Cap.
Environment Specification: General Specification:
Operation Temperature: -20 ~ 70℃ Turn-on Time (full load @115Vac): < 3 Sec
Storage Temperature: -40 ~ 85℃ Hold-up Time (full load@115Vac):>15m Sec
Storage Humidity: 5% ~ 95% RH Safety Ground leakage Current (Class I type @264Vac 60Hz): < 0.2mA
3
Page5
Input Spe cification: Protection Specification: Input Voltage: 90 – 264 Vac Blown-Out Protection: N/A
Frequency: 50/60 Hz Over Voltage Protection: Latch off (140%±30%)
Input Current: Over Load Protection: Hiccup/Auto-Recovery
@115Vac 0.95Arms；@230Vac 0.6Arms (Over current range@110%~220% above rating Load)
Inrush Current: Short Circuit Protection: Hiccup/Auto-Recovery
TeCocldh Sntairct @al1 1s5pVaec,c aitf 2ic5℃at i<o 4n0 A: p-p
Cold Start @ 230Vac, at 25℃ < 80 Ap-p
Mechanical Specifications:
4
Page6
Open Frame Switching mode Power Supply
Main Feat ures
Standard 2”x4” footprint design
Convection Cooling Design
Low no-loa d power consumption.
c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 1.0Arms；@230Vac 0.7Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 65 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R e gulation (PARD) Regulation (%)*1
(Vdc) MIN. (Convection) (%) (mVp-p) *2
LTE45FS-S0 +3.3V 0A 6.0A ± 0.5% 3.201~3.399Vdc (± 3%) 66mVp-p
LTE45FS-S1 +5.0V 0A 6.0A ± 0.5% 4.85~5.15Vdc (±3%) 75mVp-p
LTE45FS-SY +9.0V 0A 4.2A ± 0.5% 8.73~9.27Vdc (±3%) 90mVp-p
LTE45FS-S2 +12.0V 0A 4.2A ± 0.5% 11.64~12.36Vdc (±3%) 120mVp-p
LTE45FS-S3 +15.0V 0A 3.0A ± 0.5% 14.55~15.45Vdc (±3%) 150mVp-p
LTE45FS-S4 +24.0V 0A 2.1A ± 0.5% 23.28~24.72Vdc (±3%) 240mVp-p
LTE45FS-SR +30.0V 0A 1.6A ± 0.5% 29.1~30.9Vdc (±3%) 300mVp-p
LTE45FS-S6 +36.0V 0A 1.35A ± 0.5% 34.92~37.08Vdc (±3%) 360mVp-p
LTE45FS-S5 +48.0V 0A 1.05A ± 0.5% 46.56~49.44Vdc (±3%) 480mVp-p
LTE45FS-S7 +56.0V 0A 0.80A ± 0.5% 54.32~57.68Vdc (±3%) 560mVp-p
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2. Peak-to-peak for 19.8W~44.8W (convection rating) @90Vac MIN. ; Measurements with a 20MHz bandwidth and terminated with a 10uF
electrolytic Cap. In parallel with a 0.1uF ceramic Cap.
5
Page7
Environm ent Specification: General Specification: Operation Temperature: 0-50℃ Turn-on Time (full load @115Vac): < 2 Sec
Storage Temperature: -40 to 85℃ Hold-up Time (full load@115Vac):>16m Sec
Storage Humidity: 5% to 95% RH Safety Ground leakage Current (Class I type @230Vac 50Hz): < 3.5mA
InTepucht Snpiceacilf sicpaeticoinfi:c ation: Protection Specification:
Input Voltage: 90 – 264 Vac Blown-Out Protection: Auto-Recovery
Fr e quency: 50/60 Hz Over Voltage Protection: Hiccup/Auto-Recovery Input Current: Over Load Protection: Hiccup/Auto-Recovery
@115Vac 1.0Arms；@230Vac 0.7Arms (Over current range@110%~200% above rating Load)
Inrush Current: Short Circuit Protection: Hiccup/Auto-Recovery
Cold Start @115Vac, at 25℃ < 40 Ap-p
Cold Start @230Vac, at 25℃ < 65 Ap-p
Mechanical Specifications:
6
Page8
Open Frame Switching mode Power Supply
Main Feat ures
2”x3” open fra e co pact size Standard version
Convection cooling design
c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 2Arms；@230Vac 1Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 80 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R e gulation (PARD)
MIN. Regulation (%)*1 (Vdc) (Convection) (%) (mVp-p) *2
LTE60FM-S2 +12V 0A 5.0A ± 0.5% 11.64~12.36Vdc (±3%) 120mVp-p
LTE60FM-S 3 +15V 0A 4.0A ± 0.5% 14.55~15.45Vdc (±3%) 150mVp-p
LTE60FM-S4 +24V 0A 2.5A ± 0.5% 23.28~24.72Vdc (±3%) 240mVp-p
LTE60FM-S6 +36V 0A 1.67A ± 0.5% 34.92~37.08Vdc (±3%) 360mVp-p
LTE60FM-S5 +48V 0A 1.25A ± 0.5% 46.56~49.44Vdc (±3%) 480mVp-p
LTE60FM-S7 +56V 0A 1.08A ± 0.5% 54.32~57.68Vdc (±3%) 560mVp-p
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2. Peak-to-peak for 60W (convection rating) @115Vac MIN. ; Measurements with a 20MHz bandwidth and terminated with a 10uF
electrolytic Cap. In parallel with a 0.1uF ceramic Cap.
Environment Specification: General Specification:
Operation Temperature: 0-50℃ Turn-on Time (full load @115Vac): < 3 Sec
Storage Temperature: -40 to 85℃ Hold-up Time (full load@115Vac):>15m Sec
Storage Humidity: 5% to 95% RH Safety Ground leakage Current (Class I type @230Vac 50Hz): < 3.5mA
7
Page9
Input Spe cification: Protection Specification: Input Voltage: 90 – 264 Vac Blown-Out Protection: N/A Frequency: 50/60 Hz
Over Voltage Protection: Latch off (140%±30%) Input Current:
@115Vac 2Arms；@230Vac 1Arms Over Load Protection: Hiccup/Auto-Recovery
Inrush Current: (Over current range@110%~200% above rating Load)
Cold Start @115Vac, at 25℃ < 40 Ap-p Short Circuit Protection: Hiccup/Auto-Recovery
TeCocldh Sntairct @al2 3s0pVaec,c aitf 2ic5℃at i<o 8n0 A: p-p
M e c hanic al Specifications:
8
Page10
Open Frame Switching mode Power Supply
Main Feat ures
2”x4” open fra e co pact size Surge 6kV version
Convection cooling design
Output Pow er up to 60W
c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 1.25Arms；@230Vac 0.75Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 80 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R e gulation (PARD) Regulation (%)*1
(Vdc) MIN. (Convection) (%) (mVp-p) *2
LTE60FR-S2 +12V 0A 5.0A ± 0.5% 11.64~12.36Vdc (±3%) < 120mVp-p
LTE60FR-S3 +15V 0A 4.0A ± 0.5% 14.55~15.45Vdc (±3%) < 150mVp-p
LTE60FR-S4 +24V 0A 2.5A ± 0.5% 23.28~24.72Vdc (±3%) < 240mVp-p
LTE60FR-S6 +36V 0A 1.67A ± 0.5% 34.92~37.08Vdc (±3%) < 360mVp-p
LTE60FR-S5 +48V 0A 1.25A ± 0.5% 46.56~49.44Vdc (±3%) < 480mVp-p
LTE60FR-S7 +56V 0A 1.08A ± 0.5% 54.32~57.68Vdc (±3%) < 560mVp-p
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2. Peak-to-peak for 60W (convection rating) @115Vac MIN. ; Measurements with a 20MHz bandwidth and terminated with a 10uF electrolytic Cap. In parallel with a 0.1uF ceramic Cap.
Environment Specification: General Specification:
Operation Temperature: -20 ~ 70℃ Turn-on Time (full load @115Vac): < 3 Sec
Storage Temperature: -40 ~ 85℃ Hold-up Time (full load@115Vac):>15m Sec
Storage Humidity: 5% ~ 95% RH Safety Ground leakage Current (Class I type @264Vac 60Hz): < 0.2mA
9
Page11
Input Spe cification: Protection Specification: Input Voltage: 90 – 264 Vac Blown-Out Protection: N/A
Frequency: 50/60 Hz Over Voltage Protection: Latch off (140%±30%)
Input Current: Over Load Protection: Hiccup/Auto-Recovery
@115Vac 1.25Arms；@230Vac 0.75Arms (Over current range@110%~220% above rating Load)
Inrush Current: Short Circuit Protection: Hiccup/Auto-Recovery
TeCocldh Sntairct @al1 1s5pVaec,c aitf 2ic5℃at i<o 4n0 A: p-p
Cold Start @ 230Vac, at 25℃ < 80 Ap-p
Mechanical Specifications:
10
Page12
Open Frame Switching mode Power Supply
Main Feat ures
Standard 2”x4” footprint design
Suitable for Network system, Telecommunication
system, Sto rage system, Industrial application and
Consumer Electronics.
Output Pow er up to 65W c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 1.2Arms；@230Vac 0.8Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 65 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R e gulation (PARD)
(Vdc) MIN.
Regulation (%)*1
(Convection) (%) (mVp-p) *2
LTE60FS-S0 +3.3V 0A 8.0A ± 0.5% 3.201~3.399Vdc (± 3%) 66mVp-p
LTE60FS-S1 +5.0V 0A 8.0A ± 0.5% 4.85~5.15Vdc (±3%) 75mVp-p
LTE60FS-S1-1 +9.0V 0A 6.67A ± 0.5% 8.73~9.27Vdc (±3%) 90mVp-p
LTE60FS-S2 +12.0V 0A 5.0A ± 0.5% 11.64~12.36Vdc (±3%) 120mVp-p
LTE60FS-S3 +15.0V 0A 4.0A ± 0.5% 14.55~15.45Vdc (±3%) 150mVp-p
LTE60FS-S4 +24.0V 0A 2.7A ± 0.5% 23.28~24.72Vdc (±3%) 240mVp-p
LTE60FS-S4-1 +30.0V 0A 2.17A ± 0.5% 29.1~30.9Vdc (±3%) 300mVp-p
LTE60FS-S6 +36.0V 0A 1.8A ± 0.5% 34.92~37.08Vdc (±3%) 360mVp-p
LTE60FS-S5 +48.0V 0A 1.36A ± 0.5% 46.56~49.44Vdc (±3%) 480mVp-p
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2. Peak-to-peak for 26.4W~65W (convection rating) @90Vac MIN. ; Measurements with a 20MHz bandwidth and terminated with a 10uF
electrolytic Cap. In parallel with a 0.1uF ceramic Cap.
11
Page13
Environm ent Specification: General Specification: Operation Temperature: 0-50℃ Turn-on Time (full load @115Vac): < 2 Sec
Storage Temperature: -40 to 85℃ Hold-up Time (full load@115Vac):>16m Sec
Storage Humidity: 5% to 95% RH Safety Ground leakage Current (Class I type @230Vac 50Hz): < 3.5mA
InTepucht Snpiceacilf sicpaeticoinfi:c ation: Protection Specification:
Input Voltage: 90 – 264 Vac Blown-Out Protection: N/A
Fr e quency: 50/60 Hz Over Voltage Protection: Hiccup/Auto-Recovery (115%~25%) Input Current: Over Load Protection: Hiccup/Auto-Recovery
@115Vac 1.2Arms；@230Vac 0.8Arms (Over current range@110%~200% above rating Load)
Inrush Current: Short Circuit Protection: Hiccup/Auto-Recovery
Cold Start @115Vac, at 25℃ < 40 Ap-p
Cold Start @230Vac, at 25℃ < 65 Ap-p
Mechanical Specifications:
12
Page14
Open Frame Switching mode Power Supply
Main Feat ures
Ultra-co pact design with 2”x4” footprint
Convection cooling with 100W output
Low-profile for 1U chassis and small
Suitable for ITE and Industrial application
c
Technical specification
In p ut Specification:
Input Voltage 90 - 264 Vac
Frequen cy 50/60 Hz
Input Current @115Vac 1.15Arms；@230Vac 0.65Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 80 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R e gulation (PARD)
MIN. Regulation (%)*1 (Vdc) (Convection) (%) (mVp-p) *2
LTE100F-S2 +12V 0A 8.33A ± 1.0% 12.40~12.60Vdc (±5%) < 240mVp-p
LTE100F-SW +19V 0A 5.26A ± 1.0% 18.05~19.95Vdc (±5%) < 240mVp-p
LTE100F-S4 +24V 0A 4.16A ± 1.0% 23.28~24.72Vdc (±3%) < 240mVp-p
LTE100F-S6 +36V 0A 2.80A ± 1.0% 34.92~37.08Vdc (±3%) < 360mVp-p
LTE100F-S5 +48V 0A 2.08A ± 1.0% 46.56~49.44Vdc (±3%) < 480mVp-p
Note: 1. Load r
egulation is tested at 10% to 100% of rated load.
2. Peak-to-peak for 100W (convection rating) @115Vac MIN. ; Measurements with a 20MHz bandwidth and terminated with a 22uF
electrolytic Cap. In parallel with a 0.1uF ceramic Cap.
Environm ent Specification: General Specification:
Operation Temperature: 0-50℃ Turn-on Time (full load @115Vac): < 3 Sec
Storage Temperature: -40 to 85℃ Hold-up Time (full load@115Vac):>16m Sec
Storage Humidity: 5% to 95% RH Safety Ground leakage Current (Class I type @230Vac 50Hz): < 3.5mA
13
Page15
Input Spe cification: Protection Specification: Input Voltage: 90 – 264 Vac Blown-Out Protection: Auto-Recovery
Frequency: 50/60 Hz Over Voltage Protection: Latch off (145%±35%)
Input Current: Over Load Protection: Hiccup/Auto-Recovery
@115Vac 1.15Arms；@230Vac 0.65Arms (Over current range@110%~220% above rating Load)
Inrush Current: Short Circuit Protection: Hiccup/Auto-Recovery
TeCoclhd nStiacrat l@ s1p1e5Vcaifci, caat 2ti5o℃n :< 40 Ap-p
Cold Star
t @230Vac, at 25℃ < 80 Ap-p
Mechanical Specifications:
14
Page16
Open Frame Switching mode Power Supply
Main Feat ures
2”x3” open fra e co pact size
Low .05” Profile
100 W natu ral convection /120 W forced air
convection
c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 1.2Arms；@230Vac 0.65Arms
Cold Start @115Vac, at 25℃ < 60 A
Inrush Current
Cold Start @230Vac, at 25℃ < 120 A
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. F orced Regulation (PARD)
MIN. Regulation (%)*1 (Vdc) (Convection) cooled (%) (mVp-p) *2
LTE120FM-S2 +12V 0A 8.33A 10A ± 0.5% 11.64~12.36Vdc (±3%) < 120mVp-p
LTE120FM-S 3 +15V 0A 6.66A 8.0A ± 0.5% 14.55~15.45Vdc (±3%) < 150mVp-p
LTE120FM-S4 +24V 0A 4.16A 5.0A ± 0.5% 23.28~24.72Vdc (±3%) < 200mVp-p
LTE120FM-SR +30V 0A 3.33A 4.0A ± 0.5% 29.10~30.90Vdc (±3%) < 200mVp-p
LTE120FM-S5 +48V 0A 2.8A 2.5A ± 0.5% 45.56~49.44Vdc (±3%) < 250mVp-p
LTE120FM-S7 +56V 0A 1.78A 2.14A ± 0.5% 54.32~57.68Vdc (±3%) < 250mVp-p
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2. Add a 0.1uF ceramic capacitor and a 10uF Aluminum Electrolytic Capacitor to output for
Ripple Noise measuring @20MHz Bandwidth
Environment Specification: General Specification:
Operation Temperature: -20~50℃ Turn-on Time (full load @115Vac): < 2 Sec
Storage Temperature: -40 to 85℃ Hold-up Time (full load@115Vac):>16m Sec
Storage Humidity: 5% to 95% RH Safety Ground leakage Current (Class I type @230Vac 50Hz): < 100uA
15
Page17
Input Specification: Protection Specification:
Input Volta ge: 90 – 264 Vac Blown-Out Protection:
Frequency: 50/60 Hz Brown-Out voltage 65VAC min.
Input Current: Brown-In voltage 88VAC max.
@115Vac 1.2Arms；@230Vac 0.65Arms Over Voltage Protection:
Inrush Current: Over voltage Range 110%~140% Rated voltage
TeCocldh Sntairct @al1 1s5pVaec,c aitf 2ic5℃at i<o 6n0 A: Protection mode Latch
Cold Start @ 230Vac, at 25℃ < 120 A Over Load Protection: Hiccup/Auto-Recovery (Over current range 110%~170% Full load)
Short Circuit Protection: Hiccup/Auto-Recovery
Mechanical Specifications:
16
Page18
Open Frame Switching mode Power Supply
Main Feat ures
120W convection cooling power suppl with 3”x5” footprint
Ultra-Low profile design for special size constrain application
Economic c ost design
c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 2Arms；@230Vac 1Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 80 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R e gulation (PARD) Regulation (%)*1
(Vdc) MIN. (Convection) (%) (mVp-p) *2
LTE120FS-S2 +12V 0A 8.4A ± 0.5% 11.40~12.60Vdc (±5%) < 120mVp-p
LTE120FS-S 3 +15V 0A 8.0A ± 0.5% 14.25~15.75Vdc (±5%) < 150mVp-p
LTE120FS-SW +19V 0A 6.32A ± 0.5% 18.05~19.95Vdc (±5%) < 190mVp-p
LTE120FS-S4 +24V 0A 5.0A ± 0.5% 22.80~25.20Vdc (±5%) < 240mVp-p
LTE120FS-SR +30V 0A 4.0A ± 0.5% 28.50~31.50Vdc (±5%) < 300mVp-p
LTE120FS-S6 +36V 0A 3.3A ± 0.5% 34.20~37.80Vdc (±5%) < 360mVp-p
LTE120FS-S5 +48V 0A 2.5A ± 0.5% 45.60~50.40Vdc (±5%) < 480mVp-p
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2. Peak-to-peak for 100W~120W (convection rating) @115Vac MIN. ; Measurements with a 20MHz bandwidth and terminated with a 22uF
electrol ytic Cap. In parallel with a 0.1uF ceramic Cap.
Environment Specification: General Specification:
Operation Temperature: 0-50℃ Turn-on Time (full load @115Vac): < 3 Sec
Storage Temperature: -40 to 85℃ Hold-up Time (full load@115Vac):>16m Sec
Storage Humidity: 5% to 95% RH Safety Ground leakage Current (Class I type @230Vac 50Hz): < 3.5mA
17
Page19
Input Spe cification: Protection Specification: Input Voltage: 90 – 264 Vac Blown-Out Protection: Auto-Recovery
Frequency: 50/60 Hz Over Voltage Protection: Latch off (140%±30%)
Input Current: Over Load Protection: Hiccup/Auto-Recovery
@115Vac 2Arms；@230Vac 1Arms (Over current range@110%~220% above rating Load)
Inrush Current: Short Circuit Protection: Hiccup/Auto-Recovery
TeCocldh Sntairct @al1 1s5pVaec,c aitf 2ic5℃at i<o 4n0 A: p-p
Cold Start @ 230Vac, at 25℃ < 80 Ap-p
Mechanical Specifications:
18
Page20
Open Frame Switching mode Power Supply
Main Feat ures
50W convection cooling with standard 3”x5”
footprint
High reliab ility design for ITE and industrial
application
c
Technical specification
In p ut Specification:
Input Volt age 90 - 264 Vac Frequency 50/60 Hz
Input Current @115Vac 2.5Arms；@230Vac 1.5Arms
Cold Start @115Vac, at 25℃ < 40 Ap-p
Inrush Current
Cold Start @230Vac, at 25℃ < 80 Ap-p
Output Spe cification:
Output Load Range(A) Line Ripple & Noise
Load
Model No. Voltage Max. R egulation (PARD)
MIN. Regulation (%)*1 (Vdc) (Convection) (%) (mVp-p) *2
LTE150F-S2 +12V 0A 10.0A ± 0.5% 11.40~12.60Vdc (±5%) < 120mVp-p
LTE150F-S3 +15V 0A 10.0A ± 0.5% 14.25~15.75Vdc (±5%) < 150mVp-p (±1%)
LTE150F-SW +19V 0A 7.9A ± 0.5% 18.05~19.95Vdc (±5%) < 190mVp-p (±1%)
LTE150F-S4 +24V 0A 6.25A ± 0.5% 22.80~25.20Vdc (±5%) < 240mVp-p
LTE150F-SR +30V 0A 5.0A ± 0.5% 28.50~31.50Vdc (±5%) < 300mVp-p (±1%)
LTE150F-S5 +48V 0A 3.2A ± 0.5% 45.60~50.4Vdc (±5%) < 480mVp-p
LTE150F-S7 +56V 0A 2.7A ± 0.5% 53.20~58.80Vdc (±5%) < 560mVp-p (±1%)
Note: 1. Load regulation is tested at 10% to 100% of rated load.
2.Peak-to-peak for 120W~150W (convection rating) @115Vac MIN. ; Measurements with a 20MHz bandwidth
and te rminated with a 22uF electrolytic Cap. in parallel with a 0.1uF ceramic Cap.
Environment Specification: General Specification:
Operation Temperature: 0~50℃ Turn-on Time (full load @115Vac): < 3 Sec
Storage Temperature: -40 to 85℃ Hold-up Time (full load@115Vac):>16m Sec
Storage Humidity: 5% to 95% RH Safety Ground leakage Current (Class I type @230Vac 50Hz): < 3.5mA
19