1/13ページ
カタログの表紙 カタログの表紙 カタログの表紙
カタログの表紙

このカタログをダウンロードして
すべてを見る

ダウンロード(1.2Mb)

フレームグラバー Coaxlink Quad G3 DF

製品カタログ

CoaXPress規格に対応した画像入力ボードをご紹介

●CXP-6を4接続とデータ転送出力4個:カメラ帯域幅2,500MB/秒
●PCIe3.0(Gen3)×4バス:バス帯域幅3,300MB/秒
●機能豊富な10本のデジタルI/Oライン
●多種多様なフレームレートコントロール機能
●Mementoイベントログ取得ツール

※Mementoとは
イベントロギングシステム Mementoは、カメラ、フレームグラバー、そのドライバ、アプリケーションに関連するイベントの正確なログを記録します。
アプリケーションの開発およびデバッグ中、および操作中に支援を提供します。
タイムスタンプのイベントの正確なタイムラインをコンテキスト情報とともに提供します。
非侵入型で、PCのすべてのCoaxlinkカードで動作します。

このカタログについて

ドキュメント名 フレームグラバー Coaxlink Quad G3 DF
ドキュメント種別 製品カタログ
ファイルサイズ 1.2Mb
取り扱い企業 株式会社Cominix (この企業の取り扱いカタログ一覧)

この企業の関連カタログ

この企業の関連カタログの表紙
CoaxPress CXP-12 Series
製品カタログ

株式会社Cominix

この企業の関連カタログの表紙
フレームグラバー Coaxlink Octo
製品カタログ

株式会社Cominix

この企業の関連カタログの表紙
フレームグラバー Coaxlink CXP-12
製品カタログ

株式会社Cominix

このカタログの内容

Page1

Coaxlink Quad G3 DF CXP-6
Page4

Coaxlink Quad G3 DF PCIe 3.0 4接続CoaXPress フレームグラバー、データ送出 • CoaXPress CXP-6接続4個とデータ送出出力4個: カメラ帯域幅 2,500 MB/秒 • PCIe 3.0 (Gen 3) x4 バス:3,300 MB/s バス帯域幅 • 機能が豊富なデジタル I/O ラインが10本 • 多種多様なカメラコントロール機能 • Memento Event Logging Tool メリット • 画像処理の作業負荷を数台のホストPCに分配可能 • 3,300 MB/s 持続バス帯域幅 • 業界最高のデータ取り込み速度 • カメラからホストPCメモリまで25 Gbit/s (2,500 MB/s) 帯域幅 • 40メートル、CXP-6速度 (6.25 Gbps) • 100メートル、CXP-3速度 (3 Gbps) • データ転送、カメラ制御、トリガおよび電力のための廉価な1本のケーブル • 過酷な環境でも極めて高い信頼性と柔軟性を提供 • Coaxlink CXP-6ではプッシュプル式ラッチシステムを持つDIN 1.0/2.3コネクタを使用しています • Mementoは、先進開発であり、Coaxlinkカードで使用できるデバッグツールです。 • Mementoはカメラ、フレームグラバー、そのドライバ、およびアプリケーションに関連したイベントすべての正確な ログを記録します。 • 開発者は、タイムスタンプされたイベントの正確なタイムラインを、コンテキスト情報とロジックアナライザビュー とともに取得できます。 • アプリケーション開発、デバッグ、およびマシン動作中に重要な支援を行います。 © EURESYS S.A. Subject to change without notice - 1 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page5

• AMD DirectGMA および NVIDIA (CUDA) 用サンプルプログラムをご利用いただけます。 • ダイレクトGPU転送によって、システムメモリの不要なコピー作成の排除、CPUオーバーヘッドの削減、さらにレーテ ンシーの低減が実現するため、アプリケーションのデータ送出時間における大々的なパフォーマンス改善を得ること ができます。 • GPU メモリへの画像データのダイレクトキャプチャーは AMD 製 DirectGMA を使用して実現可能です。AMD FirePro W5x00 以降、およびすべての AMD FirePro S シリーズ製品と互換しています。 • 広範なセンサーおよびモーションエンコーダと互換性あり • 高速差動入力:直交モーションエンコーダは最大5 MHzまで対応 • 絶縁電流検出入力:5V、12V、24Vの信号電圧に対応、最大50 kHz、個別のガルバニック絶縁は250VDCおよび170VAC RMSまで。 • 絶縁非接触出力 • 高速5V対応TTL入力/LVTTL出力 • ユーザーに割り当てられたメモリおよびPCIアドレスを持つハードウェアボードに直接転送 • ハードウェアのスキャッタギャザー対応 • 64ビットのアドレス割当機能 • 対象が所定位置に来ると、トリガを使用して、ラインの取り込みが開始されます。ハードウェアトリガ はCoaxlinkのI/Oラインから来ます。ソフトウェアトリガはアプリケーションから来ます。 • オプションのトリガディレイを使って、プログラマブルな時間だけ取り込みを遅らせることができます。 • トリガ デシメーション機能により、トリガのいくつかをスキップできます。 • カメラの露光調整機能により、アプリケーションでカメラの露光時間を調整できます。 • Coaxlinkボードは、取り込みを開始する際に、適当なタイミングで、出力ラインに接続された照明システムの制御信 号を発生させます。 Coaxlinkは継続的なWebスキャンニング (ラインを失うことなく、無限に継続的に移動面の検査を行う) およ び離散的なオブジェクトスキャンニング (カメラの前で移動している物体の画像を取り込む) に対応していま す。 • 対象が所定位置に来ると、トリガを使用して、ラインの取り込みが開始されます。ハードウェアトリガはボード のI/Oラインから来ます。ソフトウェアトリガはアプリケーションから来ます。 • 起動後の取り込みモード: – 無限連続 (Web検査アプリケーション用) – プログラム可能なライン数で連続 (長さが既知の物体の画像取り込み用) – 終了トリガを受信するまで連続 (長さが異なる各種の物体の画像取り込み用) • オプションのトリガディレイを使って、プログラマブルなライン数だけ取り込み開始を遅らせることができます。 • モーションエンコーダから送られた信号に基づいて、Coaxlinkフレームグラバーがカメラスキャンニング率を調整し ます。対象が速く移動する場合、カメラのライン取り込みレートが増加します。対象が遅く移動する場合、カメラの ライン取り込みレートが減少します。 • Coaxlinkボードは直交モーションエンコーダから送信されたA/B信号を解釈し、対象がどの方向(前進または後 退)に移動しているのかを検知します。 • オプションとして、対象が前進したときのみまたは後進したときのみラインを取り込むようにCoaxlinkボードで設 定することができます。 • 後退モーションキャンセル機能を使用すると、後退する動きが検知されたときに取り込みが中止されます。対 象が再び前進し始めると、中止前とまったく同じ場所から取り込みを再開することができます。 • レート コンバーターを使用すると、モーションエンコーダの解像度よりも高いまたは低い任意の解像度(ユーザー がプログラム可能)でラインを取り込むことができます。これにより、アプリケーション開発中の自由度や柔軟 性が非常に大きくなります。 • レート ディバイダ―により、カメラで、モーションエンコーダの解像度よりも低い解像度でラインを取り込むこと が可能となります。レート ディバイダーはエンコーダからの入力信号の周波数を整数(ユーザーがプログラム可 能)で分割します。 © EURESYS S.A. Subject to change without notice - 2 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page6

• レートコンバータは、プログラム可能な高性能の周波数逓倍器/分割器です。 • モーションエンコーダおよびラインスキャンカメラと一緒に使用することで、画像ピクセルのアスペクト比を選択で きます。 • 一続きの画像をキャリブレーションして、簡単にスクエアピクセル (アスペクト比1:1) を得ることができます。 • Genicam</a></a>ブラウザ:システム内のGenTL Producerに装備されているGenICam機能にアクセスするためのアプリ ケーション。 • GenTLコンソール:Euresys GenTL Producerに装備されている機能およびコマンドにアクセスするためのコマンドラ インツール。 • GenApi • Standard Feature Naming Convention (SFNC) • GenTL • Intel 32ビットおよび64ビットプラットフォームおよびARM 64ビットプラットフォームのサポートを含む 対応分野 • AOI、3D SPI、3Dリード/ボール検査機器向け高速画像取り込み • フラットパネルディスプレイ検査および太陽電池検査向けの非常に高い画質のラインスキャン画像の取り込み • 検査装置用の高フレームレートの画像取り込み • 表面検査装置用のラインスキャン画像取り込み • 繊維検査装置用のラインスキャン画像取り込み • ロボット用の画像取り込み • 印刷検査装置用の高速ラインスキャン画像取り込み • 動作分析および録画のための高フレームレートビデオ取り込み 仕様 Format Standard profile, half length, 4-lane PCI Express card Cooling method Air cooling, fan-cooled heatsink Mounting For insertion in a standard height, 4-lane or higher, PCI Express card slot © EURESYS S.A. Subject to change without notice - 3 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page7

Connectors • 'A', 'B', 'C', 'D' on bracket: – 4x DIN 1.0/2.3 female connectors – CoaXPress host interface • 'DA', 'DB', 'DC', 'DD' on bracket: – 4x DIN 1.0/2.3 female connectors – CoaXpress data forwarding interface • 'INTERNAL I/O 2' on PCB: – 26-pin 2-row 0.1" pitch pin header with shrouding – I/O lines and power output • 'AUXILIARY POWER INPUT' on module: – 6-pin PEG power socket – 12 VDC power input for PoCXP camera(s) and I/O • 'C2C-LINK' on module: – 6-pin 2-row 0.1-in header – Card to card link LED indicators • 'A', 'B', 'C', 'D' on bracket: – Bi-color red/green LEDs – CoaXPress Host connector indicator • 'FPGA STATUS LAMP' on PCB: – Bi-color red/green LED – FPGA status indicator • 'BOARD STATUS LAMP' on PCB: – Bi-color red/green LED – Board status indicator Switches 'RECOVERY' on card PCB: • 3-pin 1-row 0.1" header • Firmware emergency recovery Dimensions L 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in Standard PCI Express 3.0 Link width • 4 lanes • 1 lane or 2 lanes with reduced performance Link speed • 8.0 GT/s (PCIe 3.0) • 5.0 GT/s (PCIe 2.0) with reduced performance Maximum payload size 512 bytes DMA 32- and 64-bit Peak delivery bandwidth 3,900 MB/s Effective (sustained) delivery 3,350 MB/s (Host PC motherboard dependent) bandwidth Power consumption Typ. 16.8 W (3.8 W @ +3.3V, 13 W @ +12V), excluding camera and I/O power output Interface standard(s) CoaXPress 1.0, 1.1 and 1.1.1 Connectors Four DIN1.0/2.3 75 Ohms CXP-6 Status LEDs One CoaXPress Host connection status LED per connector © EURESYS S.A. Subject to change without notice - 4 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page8

Number of cameras • Area-scan cameras: – One 1- or 2- or 4-connection camera • Line-scan cameras: – One 1- or 2- or 4-connection camera Maximum aggregated camera data 25 Gbit/s (2,500 MB/s) transfer rate Supported CXP down-connection 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), and 6.25 GT/s (CXP-6) speeds Number of CXP data streams (per 1 data stream per camera camera) Maximum CXP stream packet size 16,384 bytes PoCXP (Power over CoaXPress) • PoCXP Safe Power: – 17 W of 24V DC regulated power per CoaXPress connector – PoCXP Device detection and automatic power-on – Overload and short-circuit protections • On-board 12V to 24V DC/DC converter • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable Camera types • Area-scan cameras: – Gray-scale and color (YCbCr, YUV, RGB and Bayer CFA) – Single-tap (1X-1Y) progressive-scan • Line-scan cameras and contact imaging sensors: – Gray-scale and color RGB Camera pixel formats supported Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names): • Raw • Mono8, Mono10, Mono12, Mono14, Mono16 • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG • RGB8, RGB10, RGB12, RGB14, RGB16 • RGBA8, RGBA10, RGBA12, RGBA14, RGBA16 • YCbCr601_422_8, YCbCr601_422_10 • YCbCr709_422_8, YCbCr709_422_10 • YUV422_8, YUV422_10 Trigger • Precise control of asynchronous reset cameras, with exposure control. • Support of camera exposure/readout overlap. • Support of external hardware trigger, with optional delay and trigger decimation. Strobe • Accurate control of the strobe position for strobed light sources. • Support of early and late strobe pulses. Scan/page trigger • Precise control of start-of-scan and end-of-scan triggers. • Support of external hardware trigger, with optional delay. • Support of infinite acquisition, without missing line, for web inspection applications. Line trigger • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation. • Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%. • Rate Divider tool © EURESYS S.A. Subject to change without notice - 5 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page9

Line strobe • Accurate control of the strobe position for strobed light sources. On-board memory 1 GB Image data stream processing • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb • Optional swap of R and B components • Little endian conversion Flat-field correction Only available with the '1-camera,line-scan' and '1-df-camera, line-scan' firmware variants Input LUT (Lookup Table) Only available for monochrome cameras: • 8 to 8 bits • 10 to 8, 10 or 16 bits • 12 to 8, 12 or 16 bits Bayer CFA to RGB decoder Only available with the '1-camera' and the '1-df-camera' firmware variants Data stream statistics • Measurement of: – Frame rate (Area-scan only) – Line rate – Data rate • Configurable averaging interval Event signaling and counting • The application software can be notified of the occurrence of various events: – Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers – A large set of custom events • Custom events sources: – I/O Toolbox events – Camera and Illumination control events – CoaXPress data stream events – CoaXPress host interface events • Each custom event is associated with a 32-bit counter that counts the number of occurrences • The last three 32-bit context data words of the event context data can be configured with event-specific context data: – Event-specific data – State of all System I/O lines sampled at the event occurrence time – Value of any event counter Number of lines 10 I/O lines: • 2 differential inputs (DIN) • 2 singled-ended TTL inputs/outputs (TTLIO) • 4 isolated inputs (IIN) • 2 isolated outputs (IOUT) Electrical specifications • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem- pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers • IOUT: Isolated contact outputs compatible with 30V / 100mA loads © EURESYS S.A. Subject to change without notice - 6 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page10

Filter control • Glitch removal filter available on all System I/O input lines • Configurable filter time constants: – for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs – for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs Polarity control Yes Power output Non-isolated, +12V, 1A, with electronic fuse protection I/O Toolbox tools The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. The composition of the toolset is product- and firmware- dependent. • Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line. • Quadrature Decoder tool (QDC): A composite tool including: – A quadrature edge detector delivering events on selected transitions of selected pairs of input lines. – An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable. – A 32-bit up/down counter for delivering a position value. • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source. • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source. • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events). • User Actions Scheduler tool (UAS): to delegate the execution of User Actions at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events. I/O Toolbox composition Determined by the selected firmware variant: • 1-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS • 1-df-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS • 1-line-scan: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS • 1-df-line-scan: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS, 2 EIN Description • Accurate synchronization of the trigger and the start-of-exposure of multiple grabber- controlled area-scan cameras. • Accurate synchronization of the start-of-cycle, start-of-scan and end-of-scan of multiple grabber-controlled line-scan cameras. © EURESYS S.A. Subject to change without notice - 7 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page11

Specification • C2C-Link synchronizes cameras connected to: – the same card – to different cards in the same PC (requires an accessory cable such as the "3303 C2C- Link Ribbon Cable" or a custom-made C2C-Link cable) – to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one) • Maximum distance: – 60 cm inside a PC – 1200 m cumulated adapter to adapter cable length • Maximum trigger rate: – 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length – 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length • Trigger propagation delay from master to slave devices: – Less than 10 ns for cameras on the same card or on different Coaxlink cards in the same PC – Less than 265 ns for cameras on different cards in different PCs (3 PCs and 40m total C2C-Link cable length) Host PC Operating System • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures • Linux for x86 (32-bit), x86-64 (64-bit) and aarch64 (64-bit) processor architectures • macOS for x86-64 (64-bit) processor architecture Refer to release notes for details APIs EGrabber class, with C++ and .NET APIs: • .NET assembly designed to be used with development environments compatible with .NET frameworks version 4.0 or higher GenICam GenTL producer libraries compatible with C/C++ compilers: • x86 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86 applications • x86_64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86_64 applications • aarch64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of aarch64 applications Operating ambient air temperature 0 to +55 °C / +32 to +131 °F Operating ambient air humidity 10 to 90% RH non-condensing Storage ambient air temperature -20 to +70 °C/ -4 to +158 °F Storage ambient air humidity 10% to 90% RH non-condensing Electromagnetic - EMC standards • European Council EMC Directive 2004/108/EC • United States FCC rule 47 CFR 15 EMC - Emission • EN 55022:2010 Class B • FCC 47 Part 15 Class B KC Certification Korean Radio Waves Act, Article 58-2, Clause 3 Flammability PCB compliant with UL 94 V-0 RoHS European Union Directive 2015/863 (ROHS3) REACH European Union Regulation 1907/2006 © EURESYS S.A. Subject to change without notice - 8 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page12

WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations Product code - Description • 1635 - Coaxlink Quad G3 DF Optional accessories • 1625 - DB25F I/O Adapter Cable • 1636 - InterPC C2C-Link Adapter • 3303 - C2C-Link Ribbon Cable • 3304 - HD26F I/O Adapter Cable © EURESYS S.A. Subject to change without notice - 9 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00
Page13

EMEA Euresys SA Liège Science Park - Avenue du Pré Aily, 14 4031 Angleur - Belgium Phone: +32 4 367 72 88 Email: sales.europe@euresys.com EMEA Sensor to Image GmbH Lechtorstrasse 20 - 86956 Schongau - Germany Phone: +49 8861 2369 0 Email: sales.europe@euresys.com AMERICA Euresys Inc. 27126-B Paseo Espada - Suite 704 San Juan Capistrano, CA 92675 - United States Phone: +1 949 743 0612 Email: sales.americas@euresys.com ASIA Euresys Pte. Ltd. 750A Chai Chee Road - #07-15 Viva Business Park Singapore 469001 - Singapore Phone: +65 6445 4800 Email: sales.asia@euresys.com CHINA Euresys Shanghai Liaison O ice Unit 802, Tower B, Greenland The Center - No.500 Yunjin Road, Xuhui District 200232 Shanghai - China Euresys上海联络处 上海市徐汇区云锦路500号绿地汇中心B座802室 200232 Phone: +86 21 33686220 Email: sales.china@euresys.com JAPAN Euresys Japan K.K. Expert Office Shinyokohama - Nisso Dai 18 Building, Shinyokohama 3-7-18, Kohoku Yokohama 222-0033 - Japan 〒222-0033 神奈川県横浜市港北区新横浜3-7-18 日総第18ビル エキスパートオフィス新横浜 Phone: +81 45 594 7259 Email: sales.japan@euresys.com More at www.euresys.com © EURESYS S.A. Subject to change without notice - 10 / 10 - Coaxlink Quad G3 DF - 1635 - 2020-03-31 18:00