Network Interface Modules

2

3

4

5

■Products and combinations When a digital signal converter (terminal module) is used Ensure compliance with required international standards also for other products used in combination. Programmable Network interface module Digital signal converter (terminal module) controller IPC Terminal block Name Model Control method Model type Installation base unit 4 points, independent FA1-TH4X2SC20S1E Spring clamp type (module selectable type) 8 points, independent FA1-TH8X2SC20S1E 4 points, independent (positive) FA1-TH4X24RA1L20S1E Spring clamp type 4 points, independent (negative) FA1-TH4X24RA1H20S1E Module 8 points, independent (positive) FA1-TH8X24RA1L20S1E Spring clamp type pre-mounted 8 points, independent (negative) FA1-TH8X24RA1H20S1E unit 24VDC 16 points, independent (positive) FA1-TH16X24RA1L20S1E Dedicated cable included Spring clamp type (N/O 16 points, independent (negative) FA1-TH16X24RA1H20S1E Digital signal converter FA3-TH1□16XC-01C contact) 16 points, independent Screw type (M3) FA-TH16XRA20S CC-Link IE TSN Input model Dedicated cable not included master station FA3-TH1□16XC Screw type (M3) FA-TH16X24D31 24VDC 16 points/common, 2-wire type ● MELSEC iQ-R Screw type (M3.5) FA-TH16X24D31L ● MELSEC iQ-F 48VDC 16 points/common, 2-wire type Screw type (M3.5) FA-TH16X48D31L Module built-in 100VDC 16 points/common, 2-wire type Screw type (M3.5) FA-TH16X100D31L CC-Link IE Field unit Screw type (M3) FA-TH16X100A31 master station 100VAC 16 points/common, 2-wire type ● MELIPC Screw type (M3.5) FA-TH16X100A31L ● MELSEC iQ-R Screw type (M3) FA-TH16X200A31 200VAC 16 points/common, 2-wire type ● MELSEC iQ-F Screw type (M3.5) FA-TH16X200A31L ● MELSEC-Q ● MELSEC-L 4 points, independent (sink) FA1-TH4Y2SC20S1E ● MELSEC-F Installation base unit 8 points, independent (sink) Spring clamp type FA1-TH8Y2SC20S1E (module selectable type) CC-Link IE Field 16 points, independent (sink) FA1-TH16Y2SC20S1E Basic master Spring clamp type FA1-TH16Y2RA20S1E station FA-TH16YRA20S ● 16 points, independent Screw type (M3) MELIPC FA-TH16YRA20 ● MELSEC iQ-R N/O contact Screw type (M3.5) FA-TH16YRA20SL ● MELSEC iQ-F relay FA-TH16YRA11S ● MELSEC-Q 16 points/common, 1-wire type Screw type (M3) ● MELSEC-L FA-TH16YRA11 FA-TH16YRA21S 16 points/common, 2-wire type Screw type (M3) SLMP FA-TH16YRA21 client N/C contact ● MELIPC 16 points, independent Screw type (M3.5) FA-TH16YRAB20SL relay ● MELSEC iQ-R Dedicated cable included C/O contact ● MELSEC iQ-F Digital signal converter FA3-TH1□16Y-01C 16 points, independent Screw type (M3) FA-TH16YRAC20S Module relay ● MELSEC-Q Output model (sink) Dedicated cable not included pre-mounted Spring clamp type FA1-TH16Y1SR20S1E ● MELSEC-L FA3-TH1□16Y unit 16 points, independent ● MELSEC-F Screw type (M3) FA-TH16YSR20S Triac 16 points/common, 1-wire type Screw type (M3) FA-TH16YSR11S MODBUS/TCP 16 points/common, 2-wire type Screw type (M3) FA-TH16YSR21S ● MELSEC iQ-R 16 points, independent (sink) Spring clamp type FA1-TH16Y1TR20S1E ● MELSEC-Q 16 points/common, ● MELSEC-L Screw type (M3) FA-TH16YTL11S 1-wire type (sink) 16 points/common, CC-Link master Screw type (M3) FA-TH16YTL21S 2-wire type (sink) station Transistor ● MELSEC iQ-R 16 points/common, (sink) Screw type (M3) FA-TH16YTH11S ● MELSEC iQ-F 1-wire type (source) ● MELSEC-Q 16 points, independent Screw type (M3) FA-TH16YTR20S ● MELSEC-L (sink/source common) ● MELSEC-F Module built-in 16 points, independent, Screw type (M3) FA-TH16Y2TR20 unit 2A (sink/source common) General-purpose controller 4 points, independent (sink) FA1-TH1E4Y2SC20S1E (general-purpose Installation base unit 8 points, independent (sink) Spring clamp type FA1-TH1E8Y2SC20S1E Ethernet) (module selectable type) 16 points, independent (source) FA1-TH1E16Y2SC20S1E N/O contact 16 points, independent (source) Spring clamp type FA1-TH1E16Y2RA20S1E Dedicated cable included relay 16 points, independent (source) Screw type (M3) FA1-TH1E16Y2RA20S Digital signal converter FA3-TH1□16YE-01C Output model (source) Dedicated cable not included Triac 16 points, independent (source) Spring clamp type FA1-TH1E16Y1SR20S1E Module FA3-TH1□16YE 16 points, independent (source) Spring clamp type FA1-TH1E16Y1TR20S1E pre-mounted unit 16 points, independent Transistor Screw type (M3) FA-THE16YTR20S (sink/source common) (source) 16 points/common, Screw type (M3) FA-THE16YTH11S 1-wire type (source) Available networks □ = M CC-Link IE TSN, CC-Link IE Field, CC-Link IE Field Basic, SLMP (general-purpose Ethernet), MODBUS/TCP □ = T CC-Link IE TSN, CC-Link IE Field, CC-Link IE Field Basic, SLMP (general-purpose Ethernet) □ = C CC-Link 6

Module Specifications Model (Signal pass-through modules are not supported.) N/O contact relay (beige) Input: 24VDC 2 pcs FA-NYP24WK* Input/output model N/C contact relay (sky blue) Output: 24VDC, 100 to 240VAC, 2A 4 pcs FA-NYBP24WK* Slim module C/O contact relay (white) 24VDC, 100 to 240VAC, 6A 4 pcs FA-LYCA024VSK4 Output model Triac (black) 30 to 240VAC, 1A 2 pcs FA-SN24A01FS* Transistor (red) 3 to 30VDC, 1A 4 pcs FA-SN24D01HZS* 24VDC relay isolation (navy blue) FA1-TM1X24RA-* 24VDC photocoupler isolation (black) FA1-TM1X24D-* 48VDC photocoupler isolation (sky blue) 1 pce FA1-TM1X48D-* Functional 2 pcs Input model 100VDC photocoupler isolation (purple) module 4 pcs FA1-TM1X100D-* 100VAC photocoupler isolation (orange) FA1-TM1X100A-* 200VAC photocoupler isolation (red) FA1-TM1X200A-* Dummy module (dust protector) (green) 4 pcs FA1-TM1ND4 * is replaced with a number that corresponds to the number of modules. It is replaced with "2" when two modules are included and "4" when four modules are included. Digital signal converter (terminal module) This converter is used to convert digital signals sent between the network interface module and sensors or other devices. There are two types of terminal blocks: spring clamp type and screw type. ⨋ Input Spring clamp terminal type Screw terminal type Different input voltages (24VDC, 48VDC, 100VDC, 100VAC, 200VAC) can be specified for each terminal according to the device type. ⨋ Output Spring clamp terminal type Screw terminal type Different control methods (relay, triac, transistor) can be specified for each terminal according to the device type. 7

When an analog signal converter is used Ensure compliance with required international standards also for other products used in combination. Programmable Network interface module Analog signal converter controller Installation base Connectable module (Pass-through modules are not supported.) IPC Name Model Model Specifications Model CC-Link IE TSN 0 to 5V FA-ATSVM1XV05 master station Voltage input 1 to 5V FA-ATSVM1XV15 ● MELSEC iQ-R ● MELSEC iQ-F -10 to 10V FA-ATSVM1XV1010 Current input 4 to 20mA FA-ATSVM1XA420 CC-Link IE Field master station Distributor 4 to 20mA FA-ATSVM1XD ● MELIPC (2-wire transmitter) ● MELSEC iQ-R Pt100 -200 to +650°C FA-ATSVM1XRPT ● MELSEC iQ-F ● MELSEC-Q Pt100 0 to +100°C FA-ATSVM1XRPT0010 ● RTD input MELSEC-L Pt100 0 to +200°C FA-ATSVM1XRPT0020 ● MELSEC-F 4-channel Dedicated cable FA1-AT1B4X1TE JPt100 -200 to +600°C FA-ATSVM1XRJPT CC-Link IE Field included (spring clamp terminal block) Analog signal Type B thermocouple +600 to +1700°C FA-ATSVM1XTB Basic master station FA3-AT1□8X-01C FA1-AT1B4X1TB ● MELIPC converter (screw terminal block) Dedicated cable + Type R thermocouple 0 to +1600°C FA-ATSVM1XTR ● MELSEC iQ-R Input model not included ● MELSEC iQ-F 8-channel Type S thermocouple 0 to +1600°C FA-ATSVM1XTS FA3-AT1□8X ● MELSEC-Q FA-ATB8XTB -200 to +1200°C FA-ATSVM1XTK ● MELSEC-L (screw terminal block) 0 to +400°C FA-ATSVM1XTK0040 SLMPclient Type K thermocouple Thermocouple input 0 to +600°C FA-ATSVM1XTK0060 ● MELIPC ● MELSEC iQ-R 0 to +800°C FA-ATSVM1XTK0080 ● MELSEC iQ-F ● Type E thermocouple -200 to +900°C FA-ATSVM1XTE MELSEC-Q ● MELSEC-L Type J thermocouple -40 to +750°C FA-ATSVM1XTJ ● MELSEC-F Type T thermocouple -200 to +350°C FA-ATSVM1XTT MODBUS/TCP Type N thermocouple -200 to +1250°C FA-ATSVM1XTN ● MELSEC iQ-R ● MELSEC-Q Dummy 5 pcs FA-ATNDM5 ● MELSEC-L CC-Link master station 0 to 5V FA-ATSVM1YV05 ● MELSEC iQ-R 4-channel 1 to 5V FA-ATSVM1YV15 ● MELSEC iQ-F Dedicated cable FA1-AT1B4Y1TE Voltage output ● MELSEC-Q included (spring clamp terminal block) 0 to 10V FA-ATSVM1YV010 ● MELSEC-L Analog signal FA3-AT1□8Y-01C FA1-AT1B4Y1TB ● MELSEC-F converter (screw terminal block) + -10 to 10V FA-ATSVM1YV1010 Dedicated cable Output model not included General-purpose 8-channel 0 to 20mA FA-ATSVM1YA020 FA3-AT1□8Y Current output controller FA-ATB8YTB 4 to 20mA FA-ATSVM1YA420 (general-purpose (screw terminal block) Ethernet) Dummy 5 pcs FA-ATNDM5 Available networks □ = M CC-Link IE TSN, CC-Link IE Field, CC-Link IE Field Basic, SLMP (general-purpose Ethernet), MODBUS/TCP □ = T CC-Link IE TSN, CC-Link IE Field, CC-Link IE Field Basic, SLMP (general-purpose Ethernet) □ = C CC-Link Analog signal converter This converter is used to convert analog signals sent between the network interface module and temperature sensors or other devices. Channels are isolated from each other. Spring clamp terminal type Screw terminal type For input models, different types of analog inputs (voltage, current, distributor, thermocouple, resistance temperature detector) can be specified for each channel. For output models, different types of analog outputs (voltage, current) can be specified for each channel. 8

■Product specifications CC-Link IE TSN/Ethernet network interface modules ● Individual specifications For digital signal converters (terminal modules) Input model Output model FA3-TH1M16XC FA3-TH1M16Y FA3-TH1M16YE Item Item FA3-TH1T16XC FA3-TH1T16Y FA3-TH1T16YE Input type Positive/negative common shared type Output type Sink type Source type Number of input points 16 Number of output points 16 OFF → ON 0.1/0.2/1/1.5/5/10/20/70ms or less*1 OFF → ON 0.5ms or less*2 Input response time Response time ON → OFF 0.4/0.5/1/1.5/5/10/20/70ms or less*1 ON → OFF 1.5ms or less*2 Current consumption 0.11A Current consumption 0.12A Weight 160g Weight 160g *1: The module response time is not included. *2: The module response time is not included. For analog signal converters Input model Output model FA3-AT1M8X FA3-AT1M8Y Item Item FA3-AT1T8X FA3-AT1T8Y Number of analog input points 8 channels/module Number of analog output points 8 channels/module Analog input range 1 to 5V Digital input value 0 to 16000 I/O characteristics I/O characteristics Digital output value 0 to 16000 Analog output range 1 to 5V Ambient temperature: Ambient temperature: Accuracy ±0.3% (±48 digits)*3 ±0.3% (±12mV)*5 0 to 55°C 0 to 55°C (accuracy for the Ambient temperature: maximum digital ±0.1% (±16 digits)*3 Accuracy Ambient temperature: ±0.1% (±4mV)*5 25 ±5°C 25 ±5°C output value) Maximum resolution 0.25mV Maximum resolution 0.25mV Maximum conversion speed 1ms/channel*4 Maximum conversion speed 1ms/channel*6 Current consumption 0.14A Current consumption 0.14A Weight 160g Weight 160g *3: The module's accuracy is not taken into account. *5: The module's accuracy is not taken into account. *4: The module response time is not included. *6: The module response time is not included. ●Common specifications SLMP Item CC-Link IE TSN CC-Link IE Field CC-Link IE Field Basic MODBUS/TCP*8 (general-purpose Ethernet) Ambient operating temperature 0 to 55°C Ambient operating humidity 5 to 95%RH, non-condensing Communication 1Gbps/100Mbps 1Gbps 100Mbps 100Mbps 100Mbps/10Mbps speed Station type Remote station Remote device station Remote station Server Remote station Network specifications Certification class Class B - - - - ● Line/star topology ● Line/star topology ● Mixture of star and line Topology ● Mixture of star and line Star topology Star topology Star topology topologies topologies ● Ring topology Communication RJ45 connector External connection section method Module power Two-piece spring clamp terminal block supply section Module installation DIN rail installation or screw mounting with the supplied bracket Ethernet cable that meets the 1000BASE-T standard 1Gbps Category 5e or higher (double shielded, STP), straight cable Ethernet cable that meets the 100BASE-TX standard Communication cable 100Mbps Category 5 or higher (double shielded, STP), straight cable Ethernet cable that meets the 10BASE-T standard 10Mbps Category 3 or higher (shielded, STP), straight cable Voltage 24VDC (ripple rate within 5%) (permissible voltage: 20.4 to 28.8VDC) Module power supply Current Refer to the individual specifications.*7 External dimensions 105 (H) × 40 (W) × 70 (D) mm (not including the projections) Conformity standards*9 UL, CE, UKCA, KC *7: Both the digital signal converter and analog signal converter require a 24VDC power supply. For details on the specifications, refer to the manual of each module. *8: MODBUS/TCP is supported by FA3-TH1M16** and FA3-AT1M8** only. *9: Ensure compliance with required international standards also for other products used in combination. 9

CC-Link network interface module ● Individual specifications For digital signal converters (terminal modules) Input model Output model Item FA3-TH1C16XC Item FA3-TH1C16Y FA3-TH1C16YE Input type Positive/negative common shared type Output type Sink type Source type CC-Link station type Remote I/O station CC-Link station type Remote I/O station 32 points are assigned to a station. 32 points are assigned to a station. Number of occupied stations Number of occupied stations (16 points are used.) (16 points are used.) Number of input points 16 Number of output points 16 OFF → ON OFF → ON 0.5ms or less*2 Input response time 1.5ms or less*1 Response time ON → OFF ON → OFF 1.5ms or less*2 Current consumption 90mA Current consumption 100mA 90mA Weight 160g Weight 160g 160g *1: The module response time is not included. *2: The module response time is not included. For analog signal converters Input model Output model Item FA3-AT1C8X Item FA3-AT1C8Y Number of analog input points 8 channels/module Number of analog output points 8 channels/module CC-Link station type Remote device station CC-Link station type Remote device station CC-Link version Ver.1.10 CC-Link version Ver.1.10 Number of occupied stations 2 Number of occupied stations 2 Analog input range 1 to 5V Digital input value 0 to 16000 I/O characteristics I/O characteristics Digital output value 0 to 16000 Analog output range 1 to 5V Ambient temperature: Ambient temperature: Accuracy ±0.3% (±48 digits)*3 ±0.3% (±12mV)*5 0 to 55°C 0 to 55°C (accuracy for the Ambient temperature: maximum digital ±0.1% (±16 digits)*3 Accuracy Ambient temperature: ±0.1% (±4mV)*5 25 ±5°C 25 ±5°C output value) Maximum resolution 0.25mV Maximum resolution 0.25mV Maximum conversion speed 1ms/channel*4 Maximum conversion speed 1ms/channel*6 Current consumption 120mA Current consumption 120mA Weight 170g Weight 170g *3: The module's accuracy is not taken into account. *5: The module's accuracy is not taken into account. *4: The module response time is not included. *6: The module response time is not included. ● Common specifications Item Specifications Ambient operating temperature 0 to 55°C Ambient operating humidity 5 to 95%RH, non-condensing Communication speed 10M/5M/2.5M/625k/156kbps Network specifications Transmission path type Bus type (EIA RS485 compliant) External connection Communication section Two-piece spring clamp terminal block method Module power supply section Module installation DIN rail installation or screw mounting with the supplied bracket Voltage 24VDC (ripple rate within 5%) (permissible voltage: 20.4 to 28.8VDC) Module power supply Current Refer to the individual specifications.*7 External dimensions 105 (H) × 40 (W) × 70 (D) mm (not including the projections) Conformity standards*8 UL, CE, UKCA, KC *7: Both the digital signal converter and analog signal converter require a 24VDC power supply. For details on the specifications, refer to the manual of each module. *8: Ensure compliance with required international standards also for other products used in combination. 10

■External dimensions Unit: mm CC-Link IE TSN/Ethernet CC-Link network interface module network interface module 40 70 40 70 (86) (88) ■Function list CC-Link IE TSN/Ethernet network interface modules have the following functions. ○: Available, -: Not available Digital Analog Function Description Input Output Input Output Operation history recording function ○ - Records the ON/OFF history of I/O signals (100 data sets per signal). Logging function - ○ Records the history of digital conversion values (analog input) and digital setting values (analog output) (8000 data sets in all channels). Maintenance information recording function ○ ○ Records the operation start date (year, month, and day), operating hours, and the number of times relays turn ON*1. Maintenance alarm function ○ ○ Outputs an alarm when the specified operating hours have elapsed or the number of times relays turn ON*1. has exceeded the preset value. *1: Number of times relays turn ON is a function available for network interface modules for digital signal converters. ■Product line Available networks Specifications Dedicated cable Model Input type FA3-TH1M16XC-01C Output type (sink) Included FA3-TH1M16Y-01C Output type (source) FA3-TH1M16YE-01C CC-Link IE TSN For digital signal converters Input type FA3-TH1M16XC CC-Link IE Field Not included Output type (sink) FA3-TH1M16Y CC-Link IE Field Basic Use an optional cable. Output type (source) FA3-TH1M16YE SLMP (general-purpose Ethernet) MODBUS/TCP Input type FA3-AT1M8X-01C Included Output type FA3-AT1M8Y-01C For analog signal converters Input type Not included FA3-AT1M8X Output type Use an optional cable. FA3-AT1M8Y Input type FA3-TH1T16XC-01C Output type (sink) Included FA3-TH1T16Y-01C Output type (source) FA3-TH1T16YE-01C For digital signal converters CC-Link IE TSN Input type FA3-TH1T16XC Not included CC-Link IE Field Output type (sink) FA3-TH1T16Y Use an optional cable. CC-Link IE Field Basic Output type (source) FA3-TH1T16YE SLMP (general-purpose Ethernet) Input type FA3-AT1T8X-01C Included Output type FA3-AT1T8Y-01C For analog signal converters Input type Not included FA3-AT1T8X Output type Use an optional cable. FA3-AT1T8Y Input type FA3-TH1C16XC-01C Output type (sink) Included FA3-TH1C16Y-01C Output type (source) FA3-TH1C16YE-01C For digital signal converters Input type FA3-TH1C16XC Output type (sink) Not included FA3-TH1C16Y CC-Link Use an optional cable. Output type (source) FA3-TH1C16YE Input type FA3-AT1C8X-01C Included Output type FA3-AT1C8Y-01C For analog signal converters Input type Not included FA3-AT1C8X Output type Use an optional cable. FA3-AT1C8Y 11 6 105 39.1 6 105 39.1

■Connection cables Network interface module connection cable Name Length Model Remarks Dedicated cable 0.1m - Included with the product (FA3-□□-01C) 1m FA3-CB2L10MM1H20 Optional cables for CC-Link network interface modules for which Extension cable for connection with signal converter 2m FA3-CB2L20MM1H20 dedicated cables are not provided with modules. 3m FA3-CB2L30MM1H20 CC-Link cables CC-Link related products including CC-Link cables with or without end treatment and waterproof connectors are also available. Name Length Model CC-Link cable 200m*1 FA-CBL200SB High-performance CC-Link cable 200m*1 FA-CBL200SBH Vibration-resistant CC-Link cable for moving parts 200m*1 FA-CBL200SBZ Ver.1.10-compatible CC-Link cable 200m*1 FA-CBL200PSBH Ver.1.10-compatible vibration-resistant CC-Link cable for moving parts 200m*1 FA-CBL200PSBZ Ver.1.10-compatible cold-resistant CC-Link cable 200m*1 FA-CBL200LTPSBH Coaxial CC-Link cable with 24VDC power cable 100m*2 FA-CBL100PWSB Ver.1.10-compatible coaxial CC-Link cable with 24VDC power cable 100m*2 FA-CBL100PWPSBH *1: Custom lengths are not available, but a 1000-meter option is available. *2: Custom lengths are not available, but a 500-meter option is available. ■Related catalogs ■Related leaflets Time and Wire Saving Devices Network Devices Digital Signal Converters (Terminal Modules) Analog Signal Converters (MEIC208E·20Y) (MEIC220E·21Y) FAgoods FAgoods Time and Wire Saving Devices Network Devices General Catalog General Catalog Time and Wire Saving Devices Time and Wire Saving Devices Network Devices Network Devices Products for Monitoring and Traceability Products for Monitoring and Traceability Upgrade Tool Products Upgrade Tool Products Products for System Maintenance Products for System Maintenance Creating a safe and Toward the network-connected secure control panel new age NAGOYA ENGINEERING OFFICE 1-9, Daiko-Minami, 1-Chome, Higashi-ku, Nagoya, Aichi 461-0047 Japan Website www.mitsubishielectricengineering.com/sales/fa/meefan/ ▶Contact US Precautions for Choosing the Products For safe use Mitsubishi Electric Engineering will not be held liable for damage caused ●To use the products given in this publication properly, always read the relevant manuals before beginning by factors found not to be the cause of Mitsubishi Electric Engineering; operation. opportunity losses or lost profits caused by faults in the Mitsubishi Electric ●The products have been manufactured as general-purpose parts for general industries, and are not designed or Engineering products; damage, secondary damage, accident manufactured to be incorporated in a device or system used in purposes related to human life. compensation caused by special factors unpredictable by Mitsubishi ●Before using the products for special purposes such as nuclear power, electric power, aerospace, medicine or passenger-carrying vehicles, consult with Mitsubishi Electric Engineering. Electric Engineering; damages to products other than Mitsubishi Electric ●The products have been manufactured under strict quality control. However, when installing the products where major Engineering products; and to other duties. accidents or losses could occur if the products fail, install appropriate backup or fail-safe functions in the system. Published in June 2023 MEIC215E・214B Specifications are subject to change without notice.