Phoenix Ultima

Phoenix Ultima PCB technology Down to 4µm line/space Panel Size (maximum) 30"× 26" (762mm × 660mm) Panel Thickness Range 1mil - 200mil (0.025mm - 5mm) Panel Types and Designs Inner and outer layers, build-up and sequential lamination layers including Signal, Mix and P&G, Cross-Shield, Laser drilled layers Materials Inspected All copper foil types; Plated copper; Gold Plating; Silver-Halide and Diazo; Photo-Resist; Teflon and Ceramic; DSTF, DT and other low contrast materials Detectable Defect Types Open and short circuit, Nick, Protrusion, Mouse-bite, Pinhole, Island, Dish-down, Line/Space width violation , Annular ring violation, Extra and Missing features Reference Source Data CAM Tooling Pin-less Operating System Windows 7™ 64bit Detection and set-up engine Powered by Spark™ AMHS The Phoenix can be connected to AMHS Verification and Repair Methods Offline verification station Dimensions Height ‒ 68.5" (174cm) Width ‒ 67.7" (172cm) Depth ‒ 93.3" (237cm) Weight ‒ 1550Kg Power ‒ 220±10%VAC; 50/60Hz; 2.5Kw Compressed Air 6ATM, 1L/min Temperature and Humidity 22±3°C; 50±10%RH Optional Features +2DM ‒ panel dimensions measurement Fi ‒ final inspection +2CD ‒ 2D measurement of circuit elements LDI ‒ laser drill inspection +3DH ‒ 3D measurements of circuit element’s height VVS ‒ virtual verification system +3DP ‒ 3D profiling of circuit element CDB/CDBIC ‒ defects classification and virtual defects mapping Powered by Spark™ Powered by Prisma™ ▪ Superior detection ▪ Capability to detect ultra-fine shorts ▪ Lowest false calls rate ▪ Adaptability to wide range of materials ▪ Simple and quick setup ▪ Designed to maximize image contrast ▪ Fast adaptation cycle Powered by µMicro™ ▪ Parallel hardware and software data processing ▪ Special algorithms to detect micro defects ▪ Advanced optics and image processing hardware Copyright of CIMS LIMITED© 2020. All rights reserved. Subject to revision without notice.