Kulite半導体式圧力センサ

1 23 MINIATURE LEADLESS PRESSURE TRANSDUCER XCL-072 SERIES • Designed For Harsh Environments • Ideal For Turbine Engine Probes and Wind Tunnel Applications • Patented Leadless Technology VIS® • Designed For Both Static and Dynamic Response • Suitable For Use in Most Conductive Liquids and Gases The XCL-072 design features Kulite's patented leadless technology. This allows for a very rugged package suited for probes, pressure rakes and other similar test set ups. This transducer is well suited for both dynamic and static pressure measurements in benign or harsh environments. Kulite recommends the KSC-2 signal conditioner to maximize the measurement capability of the XCL-072 transducer. .076 PRESSURE REFERENCE TUBE (1.9) B SCREEN STANDARD .016 O.D. X 1” LONG M SCREEN OPTIONAL (.41 X 25.4) FOR GAGE &DIFFERENTIAL UNITS COMPENSATION MODULE .110 DIA. X 1” (2.8 X 25.4) LONG FOR 36 AWG LEADS .375 (9.5) 4 LEADS TEFLON INSULATED #36 AWG 24" (610) LONG BEFORE COMP. MODULE WIRING COLOR DESIGNATION 4 LEADS TEFLON INSULATED RED + INPUT #36 AWG 12" (305) LONG BLACK – INPUT AFTER COMP. MODULE GREEN + OUTPUT WHITE – OUTPUT NOTE: FOR INTERNAL COMPENSATION CONSULT FACTORY 0.7 1.0 1.7 3.5 7 14 21 35 70 BAR Pressure Range 10 15 25 50 100 200 300 500 1000 PSI Operational Mode Absolute, Gage, Absolute, Gage, Sealed Gage, Differential Differential Absolute, Sealed Gage Over Pressure 2 Times Rated Pressure Burst Pressure 3 Times Rated Pressure Pressure Media Most Conductive Liquids and Gases - Please Consult Factory Rated Electrical Excitation 10 VDC/AC Maximum Electrical Excitation 12 VDC/AC Input Impedance 1000 Ohms (Min.) Output Impedance 1000 Ohms (Nom.) Full Scale Output (FSO) 100 mV (Nom.) Residual Unbalance ± 5 mV (Typ.) Combined Non-Linearity, Hysteresis and Repeatability ± 0.1% FSO BFSL (Typ.), ± 0.5% FSO (Max.) Resolution Infinitesimal Natural Frequency of Sensor Without Screen (KHz) (Typ.) 175 200 240 300 380 550 575 700 1000 Acceleration Sensitivity % FS/g Perpendicular 1.0x10-3 6.5x10-4 5.0x10-4 3.0x10-4 1.5x10-4 1.1x10-4 9.0x10-5 6.0x10-5 4.0x10-5 Insulation Resistance 100 Megohm Min. @ 50 VDC Operating Temperature Range -65°F to +250°F (-55°C to +120°C) Compensated Temperature Range +80°F to +180°F (+25°C to +80°C) Any 100°F Range Within The Operating Range on Request Thermal Zero Shift ± 1% FS/100°F (Typ.) Thermal Sensitivity Shift ± 1% /100°F (Typ.) Steady Acceleration 10,000g. (Max.) Linear Vibration 10-2,000 Hz Sine, 100g. (Max.) Electrical Connection 4 Leads 36 AWG 36" Long Weight .2 Gram (Nom.) Excluding Module and Leads Pressure Sensing Principle Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon Patented Leadless Technology Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (N) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2014 Kulite Semiconductor Products, Inc. All Rights Reserved. Kulite miniature pressure transducers are intended for use in test and research and development programs and are not necessarily designed to be used in production applications. For products designed to be used in production programs, please consult the factory. KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kulite.com PHYSICAL ENVIRONMENTAL OUTPUT INPUT