TE FullAxs (防水I/Oコネクタ)｜BtoB & I/Oコネクタ製品群

FullAXS CONNECTOR SEALING & CABLE ASSEMBLY System Solution Guide Next Generation x-TTA Solution Next generation WiMAX and Long Term Evolution (LTE) Fiber/Power/Signal To The Antenna (x-TTA) connectivity designs require rugged cable assemblies for outdoor use. For direct connection, these cable assemblies need to plug directly into the optical transceivers or other connector types though a bulkhead construction. For this specific application, the connector design will need to accommodate for a large tolerance in Z-direction. Furthermore, the connector shell must allow for easy one handed mating. TE Connectivity’s (TE) FullAXS connector sealing systems were designed to function with a very large Z-axis tolerance, hence accommodating for the broadest range of transceivers on the market. This unique feature allows end users to pick almost any transceiver they wish. The FullAXS connector sealing system and cable assembly includes FullAXS Mini and FullAXS connector sealing products. DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY

Overview Product Portfolio CONNECTOR SEALING FullAXS Connector FullAXS Mini (36mm) Connector (29.2mm) BULKHEADS FullAXS Mini FullAXS 29.2mm 36mm DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY PAGE 2

FullAXS Mini Connector Sealing FullAXS Mini connector sealing system delivers the small size and scalability to design in power and signal connectivity almost anywhere on the box. Easy-to-install mating features and ruggedized protection allow them to be installed in virtually any environment. Effi ciency in Design FullAXS Mini connector sealing system is about 20% smaller than FullAXS products and can be placed almost anywhere on the box thanks to their fl exible design. As space in the bottom of the box gets smaller and smaller, FullAXS Mini connector sealing products make it easy to transmit power or signal using connections anywhere. Their modular design make them scalable in form, fi t and function. Applications • Wireless outdoor applications Mating Made Easy • WiMAX and LTE base stations FullAXS Mini connector sealing system is one of the only • Remote Radio Heads (RRH) • Industrial outdoor applications products available that enable one-handed, blind installs • Robotics from any angle including upside down. With 3-sense locking • Aerospace and defense feedback, fl oating connection and a twist angle of only 30o, FullAXS Mini products can be installed by fi eld engineers of all Specifi cations levels of experience in virtually any location. Environmental • IP65 and IP67 (IEC 60529) Long Lasting in Harsh Environments • Operating temperature range: -40oC to 85oC FullAXS Mini connector sealing system delivers a water tight seal • Salt spray (EIA 364-26B up to IP67 and IP65 levels, uses UV material to meet F1 rating, Condition A) UL 94-V0 and withstands lightning strike requirements per IEC • UL F1 rated (ISO 4892-3) 62305-1 for shielded version, up to 20kA at 10/350 micro sec. • Flammability rating UL94-V0 • RoHS/Reach Product Compliance Mechanical • 100 mating cycles (EIA-364-9) • 150 N side load (IEC 60512-17-1 / EIA-364-38) • 150 N pull force (IEC 60512-17-1 / EIA-364-38) • Vibration 10-150-10Hz sweeping (IEC 60512-6-4) Application Spec • 114-32138 Product Spec • 108-19486 DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY PAGE 3

FullAXS Mini Connector Sealing Key Product Features Effi ciency in Design • About 20% smaller than FullAXS products • Flexible sealing system allows connectors to be placed anywhere on the box • Modular design makes connectors scalable in form, fi t and function 30o Mating Made Easy • Twist angle to lock the robust bayonet is only 30o • Enables one-handed, blind installs from any angle using only thumb and index fi nger to easily grip the tapered back end of the connector • 3-sense locking feedback: visual, audio and tangible • Floating connector solution secures correct mating in Z-direction Long Lasting in Harsh Environments • Ingress protection according to IP65 and IP67 • UV material meets F1 rating, UL 94-V0 • Withstand lightning strike requirements per IEC 62305-1 for shielded version, up to 20kA at 10/350 micro sec DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY PAGE 4

FullAXS Mini Cable Assemblies Products FIBER OPTIC FLOATING CABLE ASSEMBLY Features • Open bulkhead for easy access to SFP • Bulkhead cutout allows for removal of transceiver through the bulkhead (no need to open Remote Radio Head (RRH) for transceiver replacement) • Water proof, dust proof and corrosion resistant • Plug has tolerance free design, free fl oating on Z-axis • No cable buckling during or after installation Specifi cations Mechanical/Electrical Optical Duplex LC Interconnect • 100N pull force at cable (IEC 60512-17-1 • Insertion loss 0.3dB (SM) and 0,5dB (MM) / EIA-364-38) (IEC 61300-3-4 method B) • 50 N side load in all directions at cable • Return loss 50dB (SM) and 30dB (MM) (IEC 60512-17-1 / EIA-364-38) (IEC 61300-3-6 method 1) • Controlled ferrule compression force (IEC spec 61300-3-22) • PIM < -140dBc of 38dBm at 1800MHz FIXED COPPER CABLE ASSEMBLY* Features • Cable diameter max. 9.5mm, • Fixed versions for ET power using the same outer shell as and RJ45 FO version (29.2mm) • ET power connector fi xed • Fully shielded from the braid with body alignment 360 degrees to the box wall adapters in inner body for for best performance easy, one-handed mating • Length to panel (w/o boot) with blind mate feature 80mm Specifi cations Mechanical • 50 mating cycles (EIA-364-9) Electrical • 20A simultaneously • Voltage max 60V • Protection against lightning up to 20 kA at 10/350μs (IEC 62305-1) • EMI protected 1 GHz at -30dB (IEC 60512-23-1) • DATA TBD *Currently designed, but not tooled. Contact your TE representative for more information DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY PAGE 5

FullAXS Mini Cable Assemblies Products FIELD INSTALLABLE Features • Fiber DPX “fool proof” design protects the fi ber cable during uninstallation by preventing the outer shell being turned before the nut is unscrewed (see dia- grams below) • Long version includes clamp to tube • Plug diameter 29.2mm FullPROOF 80 & 140 FullPOWER FullFLEX 500 “Fool Proof” Feature Installation of FullPROOF Latch on bayonet shell goes into the groove in the threads 3 5 1 6 4 2 Uninstall of FullPROOF Nut locks the latch in the groove, preventing the Toolless 2 bayonet shell from being disconnected fi rst 3 Hand 1 Tightened Foolproof DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY PAGE 6

FullAXS Mini Connector Sealing Products BULKHEAD; DIE CAST BAYONET Standard Features • Cost effective metal diecast • 2 bulkhead versions available: standard and EMI shielded • Transceiver fully protected in the bulkhead • Cut-out for easy access to SFP module • Bayonet style of locking • Ingress protection according to IP65 and IP67 sealing EMI Shielded • Keying • Same bulkhead for fiber, RJ45, PoE, power and signal applications • Shielded and unshielded dust caps available • Rectangular or square footprint Part Numbers FullAXS Mini Fiber Assemblies Part Number Description 2061980-X FOSM GLARO LEAD 4.8 mm FXS Mini FullAXS Mini Field Installable Kits Part Number Description 2061920-1* FullPROOF80 Mini Field Install Kit* 2061973-1 FullPROOF140 Mini Field Install Kit 2061926-1 FullFLEX500 Mini Field Install Kit 2061933-1 FullPOWER Mini Field Install Assembly Kit FullAXS Mini Bulkhead Sub-Assemblies Part Number Description 2061870-1* FullAXS MINI Bulkhead, EMI* 2061981-1 FullAXS MINI Bulkhead 2061953-1 FullAXS MINI Bulkhead Cap, EMI Shielded 2061953-2 FullAXS MINI Bulkhead Cap *Currently designed, but not tooled. Contact your TE representative for more information DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY PAGE 7

FullAXS Connector Sealing Applications • WiMAX and LTE Base Stations • Remote Radio Heads (RRH) • Industrial outdoor applications • Robotics • Aerospace & Defense Key Features • Open bulkhead for easy access to SFP • Positive mechanical feedback to operator when fully mated • One-hand mating • Duplex LC interface • Bulkhead cutout allows for Mechanical removal of transceiver through • Designed to meet 150 N cable retention the bulkhead (no need to open • Designed to meet IP67 RRH for transceiver replacement) • LC interface • Robust bayonet locking for easy, • Single- and Multimode fast, and secure mating • Adapter footprint : 36mm x 36mm • Multimode and single mode • Bayonet style locking • Water proof, dust proof and • Duplex LC interconnect MM or SM corrosion resistant. • No tools required • Expansion to RJ45 and • Operating temperature : -40ºC to +70ºC Power possible • Mating durability min : 100 cycles. • Plug has tolerance free design, fully free floating on Z-axis Specifications • No cable buckling during or • Temperature : -40°C to +70°C after installation. • 150 N Pull Force : per IEC61300-2-4 • Cost effective metal die • Protection Class : IP 65 (IP 67 on request) cast bulkhead • 100 Mating Cycles • Field installable version available • Vibration : per IEC 61300-2-1 • Salt mist : per IEC 61300-2-26 • Impact : per IEC 61300-2-12 • Temperature/Humidity : per IEC 61300-2-22 DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY PAGE 8

FullAXS Connectors Part Numbers FullAXS Bulkhead Part Number Description 2061433-1 FOAC FullAXS bulkhead assembly FullAXS Cable Assembly Part Number Description Fiber Size Available Lengths 2061846 FOSM LEAD 4.8mm FULLAXS LC/DPX - LC/DPX Single mode 1-999 m 2061506 FOMM50 LEAD 4.8mm FULLAXS LC/DPX - LC/DPX Multimode (50/125) 1-999 m DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY PAGE 9

TE Technical Support Center USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 te.com FullAXS, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2016 TE Connectivity Ltd. family of companies All Rights Reserved. 4-1773460-4   08/16   DND DATA AND DEVICES / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY